Windows Server 2008 R2 下配置TLS1.2添加自簽名證書的圖文教程
前言
2017年1月1日起App Store上的所有App應用將強制開啟ATS功能。
蘋果的ATS(App Transport Security)對服務器硬性3點要求:
① ATS要求TLS1.2或者更高,TLS 是 SSL 新的別稱。
② 通訊中的加密套件配置要求支持列出的正向保密。
③ 數字證書必須使用sha256或者更高級的簽名哈希算法,并且保證密鑰是2048位及以上的RSA密鑰或者256位及以上的ECC密鑰。
由于領導舍不得花錢,只能辛苦我們自己搞個不花錢的證書。在網上找了一大堆各種配置證書服務的文章,在ios端運行的時候總是直接報錯,很是費解,后來注意到必須是TLS1.2或者更高的版本,而按照網上的配置弄好后都是ssl1.0,根本原因沒有解決。所以必須先升級服務器ssl的版本,這個升級的文章很多,有用的不多。在這里整理下找到的資料,供大家參考。注意:證書服務可以不用安裝,升級ssl后即可正常訪問。
1.首先打開服務器組策略,命令行輸入gpedit.msc,找到ssl配置設置,雙擊ssl密碼套件順序,選擇已啟用,并保存。準備工作完成!
2.在下面選擇您需要的配置并復制,打開Powershell直接粘貼。最后會提示是否重啟服務器,輸入Y會直接重啟,根據自己的情況而定吧,重啟后生效哦~
2.1. configure your IIS server with Perfect Forward Secrecy and TLS 1.2:
# Copyright 2016, Alexander Hass # http://www.hass.de/content/setup-your-iis-ssl-perfect-forward-secrecy-and-tls-12 # # Version 1.7 # - Windows Version compare failed. Get-CimInstance requires Windows 2012 or later. # Version 1.6 # - OS version detection for cipher suites order. # Version 1.5 # - Enabled ECDH and more secure hash functions and reorderd cipher list. # - Added Client setting for all ciphers. # Version 1.4 # - RC4 has been disabled. # Version 1.3 # - MD5 has been disabled. # Version 1.2 # - Re-factored code style and output # Version 1.1 # - SSLv3 has been disabled. (Poodle attack protection) Write-Host 'Configuring IIS with SSL/TLS Deployment Best Practices...' Write-Host '--------------------------------------------------------------------------------' # Disable Multi-Protocol Unified Hello New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null Write-Host 'Multi-Protocol Unified Hello has been disabled.' # Disable PCT 1.0 New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null Write-Host 'PCT 1.0 has been disabled.' # Disable SSL 2.0 (PCI Compliance) New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null Write-Host 'SSL 2.0 has been disabled.' # NOTE: If you disable SSL 3.0 the you may lock out some people still using # Windows XP with IE6/7. Without SSL 3.0 enabled, there is no protocol available # for these people to fall back. Safer shopping certifications may require that # you disable SSLv3. # # Disable SSL 3.0 (PCI Compliance) and enable "Poodle" protection New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null Write-Host 'SSL 3.0 has been disabled.' # Add and Enable TLS 1.0 for client and server SCHANNEL communications New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null Write-Host 'TLS 1.0 has been enabled.' # Add and Enable TLS 1.1 for client and server SCHANNEL communications New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null Write-Host 'TLS 1.1 has been enabled.' # Add and Enable TLS 1.2 for client and server SCHANNEL communications New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null Write-Host 'TLS 1.2 has been enabled.' # Re-create the ciphers key. New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers' -Force | Out-Null # Disable insecure/weak ciphers. $insecureCiphers = @( 'DES 56/56', 'NULL', 'RC2 128/128', 'RC2 40/128', 'RC2 56/128', 'RC4 40/128', 'RC4 56/128', 'RC4 64/128', 'RC4 128/128' ) Foreach ($insecureCipher in $insecureCiphers) { $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers', $true).CreateSubKey($insecureCipher) $key.SetValue('Enabled', 0, 'DWord') $key.close() Write-Host "Weak cipher $insecureCipher has been disabled." } # Enable new secure ciphers. # - RC4: It is recommended to disable RC4, but you may lock out WinXP/IE8 if you enforce this. This is a requirement for FIPS 140-2. # - 3DES: It is recommended to disable these in near future. This is the last cipher supported by Windows XP. # - Windows Vista and before 'Triple DES 168' was named 'Triple DES 168/168' per https://support.microsoft.com/en-us/kb/245030 $secureCiphers = @( 'AES 128/128', 'AES 256/256', 'Triple DES 168' ) Foreach ($secureCipher in $secureCiphers) { $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers', $true).CreateSubKey($secureCipher) New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\$secureCipher" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null $key.close() Write-Host "Strong cipher $secureCipher has been enabled." } # Set hashes configuration. New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes' -Force | Out-Null New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5' -Force | Out-Null New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null $secureHashes = @( 'SHA', 'SHA256', 'SHA384', 'SHA512' ) Foreach ($secureHash in $secureHashes) { $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes', $true).CreateSubKey($secureHash) New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\$secureHash" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null $key.close() Write-Host "Hash $secureHash has been enabled." } # Set KeyExchangeAlgorithms configuration. New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms' -Force | Out-Null $secureKeyExchangeAlgorithms = @( 'Diffie-Hellman', 'ECDH', 'PKCS' ) Foreach ($secureKeyExchangeAlgorithm in $secureKeyExchangeAlgorithms) { $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms', $true).CreateSubKey($secureKeyExchangeAlgorithm) New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\$secureKeyExchangeAlgorithm" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null $key.close() Write-Host "KeyExchangeAlgorithm $secureKeyExchangeAlgorithm has been enabled." } # Set cipher suites order as secure as possible (Enables Perfect Forward Secrecy). $os = Get-WmiObject -class Win32_OperatingSystem if ([System.Version]$os.Version -lt [System.Version]'10.0') { Write-Host 'Use cipher suites order for Windows 2008R2/2012/2012R2.' $cipherSuitesOrder = @( 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P521', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P384', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P256', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P521', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P384', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P521', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P384', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P256', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P521', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P384', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P256', 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P521', 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P384', 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P521', 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P384', 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P256', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P521', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P384', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P521', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P384', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P256', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P521', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P384', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P256', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P521', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P384', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P256', 'TLS_RSA_WITH_AES_256_GCM_SHA384', 'TLS_RSA_WITH_AES_128_GCM_SHA256', 'TLS_RSA_WITH_AES_256_CBC_SHA256', 'TLS_RSA_WITH_AES_128_CBC_SHA256', 'TLS_RSA_WITH_AES_256_CBC_SHA', 'TLS_RSA_WITH_AES_128_CBC_SHA', 'TLS_RSA_WITH_3DES_EDE_CBC_SHA' ) } else { Write-Host 'Use cipher suites order for Windows 10/2016 and later.' $cipherSuitesOrder = @( 'TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384', 'TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256', 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA', 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA', 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384', 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256', 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA', 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA', 'TLS_RSA_WITH_AES_256_GCM_SHA384', 'TLS_RSA_WITH_AES_128_GCM_SHA256', 'TLS_RSA_WITH_AES_256_CBC_SHA256', 'TLS_RSA_WITH_AES_128_CBC_SHA256', 'TLS_RSA_WITH_AES_256_CBC_SHA', 'TLS_RSA_WITH_AES_128_CBC_SHA', 'TLS_RSA_WITH_3DES_EDE_CBC_SHA' ) } $cipherSuitesAsString = [string]::join(',', $cipherSuitesOrder) # One user reported this key does not exists on Windows 2012R2. Cannot repro myself on a brand new Windows 2012R2 core machine. Adding this just to be save. New-Item 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -ErrorAction SilentlyContinue New-ItemProperty -path 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -name 'Functions' -value $cipherSuitesAsString -PropertyType 'String' -Force | Out-Null Write-Host '--------------------------------------------------------------------------------' Write-Host 'NOTE: After the system has been rebooted you can verify your server' Write-Host ' configuration at https://www.ssllabs.com/ssltest/' Write-Host "--------------------------------------------------------------------------------`n" Write-Host -ForegroundColor Red 'A computer restart is required to apply settings. Restart computer now?' Restart-Computer -Force -Confirm
2.2 iisresetssltoweakdefaults
# Copyright 2016, Alexander Hass # http://www.hass.de/content/setup-your-iis-ssl-perfect-forward-secrecy-and-tls-12 # # Version 1.0 # - Rollback script created. Write-Host 'Reset IIS to weak and insecure SSL defaults...' Write-Host '--------------------------------------------------------------------------------' New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers' -Force New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\CipherSuites' -Force New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes' -Force New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms' -Force New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols' -Force New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -Force New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name DisabledByDefault -value 1 -PropertyType 'DWord' New-Item 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -Force Restart-Computer -Force
3.最后配置IIS站點,添加ssl自簽名證書,站點綁定https,并選擇剛添加的自簽名證書即可。
4.全稱無需給服務器安裝證書服務,ios客戶端證書校驗時默認全部通過即可,如果對安全要求嚴格的客戶端可導入證書做校驗。
相關文章
Windows 8 IIS中配置PHP運行環境的方法
這篇文章主要介紹了如何在Windows 8中通過iis8配置php運行環境,需要的朋友可以參考下2013-09-09在IIS 7中配置PHP運行環境簡單步驟[圖文教程]
在IIS 7中配置PHP運行環境簡單步驟,需要的朋友可以參考下。2011-06-06Windows Server 2019 取消默認IE 瀏覽器安全增強配置的步驟
Windows Server 2019 操作系統打開ie瀏覽器的時候各種對話框提示,下面就為大家分享一下解決方法2022-08-08win2008 服務器安全檢查步驟指引(日常維護說明)
這篇文章主要介紹了win2008 服務器安全檢查步驟指引,一般來說日常維護是很重要的,很多黑客留各種后門,大家一定要安裝mcafee之類的軟件2018-11-11win2000服務器在IIS中使用SSL配置HTTPS網站
下面我們以WIN2000服務器版本的來做例子,介紹一下怎樣利用SSL加密HTTP通道來加強IIS安全的,需要的朋友可以參考下2017-03-03windows 2008 iis 提示401未授權 由于憑據無效,訪問被拒絕
這篇文章主要為大家分享一個自己在使用windows 2008服務器時碰到提示iis 401 未授權: 由于憑據無效,訪問被拒絕問題的解決方法總結2014-05-05Windows安裝MySQL8.0.16 的步驟及出現錯誤問題解決方法
現在的mysql8安裝只能采用解壓配置版,像以前老版本的傻瓜式安裝將不復存在。下面小編給大家?guī)?lái)了解決Windows安裝MySQL8.0.16 步驟及出現錯誤問題,感興趣的朋友一起看看吧2019-06-06