欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

JAVA中讀取文件(二進制,字符)內容的幾種方法總結

 更新時間:2017年02月11日 16:53:48   作者:強者用結果說話  
本篇文章主要介紹了JAVA中讀取文件(二進制,字符)內容的方法總結,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧

JAVA中讀取文件內容的方法有很多,比如按字節讀取文件內容,按字符讀取文件內容,按行讀取文件內容,隨機讀取文件內容等方法,本文就以上方法的具體實現給出代碼,需要的可以直接復制使用

public class ReadFromFile {
 /**
  * 以字節為單位讀取文件,常用于讀二進制文件,如圖片、聲音、影像等文件。
  */
 public static void readFileByBytes(String fileName) {
  File file = new File(fileName);
  InputStream in = null;
  try {
   System.out.println("以字節為單位讀取文件內容,一次讀一個字節:");
   // 一次讀一個字節
   in = new FileInputStream(file);
   int tempbyte;
   while ((tempbyte = in.read()) != -1) {
    System.out.write(tempbyte);
   }
   in.close();
  } catch (IOException e) {
   e.printStackTrace();
   return;
  }
  try {
   System.out.println("以字節為單位讀取文件內容,一次讀多個字節:");
   // 一次讀多個字節
   byte[] tempbytes = new byte[100];
   int byteread = 0;
   in = new FileInputStream(fileName);
   ReadFromFile.showAvailableBytes(in);
   // 讀入多個字節到字節數組中,byteread為一次讀入的字節數
   while ((byteread = in.read(tempbytes)) != -1) {
    System.out.write(tempbytes, 0, byteread);
   }
  } catch (Exception e1) {
   e1.printStackTrace();
  } finally {
   if (in != null) {
    try {
     in.close();
    } catch (IOException e1) {
    }
   }
  }
 }

 /**
  * 以字符為單位讀取文件,常用于讀文本,數字等類型的文件
  */
 public static void readFileByChars(String fileName) {
  File file = new File(fileName);
  Reader reader = null;
  try {
   System.out.println("以字符為單位讀取文件內容,一次讀一個字節:");
   // 一次讀一個字符
   reader = new InputStreamReader(new FileInputStream(file));
   int tempchar;
   while ((tempchar = reader.read()) != -1) {
    // 對于windows下,\r\n這兩個字符在一起時,表示一個換行。
    // 但如果這兩個字符分開顯示時,會換兩次行。
    // 因此,屏蔽掉\r,或者屏蔽\n。否則,將會多出很多空行。
    if (((char) tempchar) != '\r') {
     System.out.print((char) tempchar);
    }
   }
   reader.close();
  } catch (Exception e) {
   e.printStackTrace();
  }
  try {
   System.out.println("以字符為單位讀取文件內容,一次讀多個字節:");
   // 一次讀多個字符
   char[] tempchars = new char[30];
   int charread = 0;
   reader = new InputStreamReader(new FileInputStream(fileName));
   // 讀入多個字符到字符數組中,charread為一次讀取字符數
   while ((charread = reader.read(tempchars)) != -1) {
    // 同樣屏蔽掉\r不顯示
    if ((charread == tempchars.length)
      && (tempchars[tempchars.length - 1] != '\r')) {
     System.out.print(tempchars);
    } else {
     for (int i = 0; i < charread; i++) {
      if (tempchars[i] == '\r') {
       continue;
      } else {
       System.out.print(tempchars[i]);
      }
     }
    }
   }

  } catch (Exception e1) {
   e1.printStackTrace();
  } finally {
   if (reader != null) {
    try {
     reader.close();
    } catch (IOException e1) {
    }
   }
  }
 }

 /**
  * 以行為單位讀取文件,常用于讀面向行的格式化文件
  */
 public static void readFileByLines(String fileName) {
  File file = new File(fileName);
  BufferedReader reader = null;
  try {
   System.out.println("以行為單位讀取文件內容,一次讀一整行:");
   reader = new BufferedReader(new FileReader(file));
   String tempString = null;
   int line = 1;
   // 一次讀入一行,直到讀入null為文件結束
   while ((tempString = reader.readLine()) != null) {
    // 顯示行號
    System.out.println("line " + line + ": " + tempString);
    line++;
   }
   reader.close();
  } catch (IOException e) {
   e.printStackTrace();
  } finally {
   if (reader != null) {
    try {
     reader.close();
    } catch (IOException e1) {
    }
   }
  }
 }

 /**
  * 隨機讀取文件內容
  */
 public static void readFileByRandomAccess(String fileName) {
  RandomAccessFile randomFile = null;
  try {
   System.out.println("隨機讀取一段文件內容:");
   // 打開一個隨機訪問文件流,按只讀方式
   randomFile = new RandomAccessFile(fileName, "r");
   // 文件長度,字節數
   long fileLength = randomFile.length();
   // 讀文件的起始位置
   int beginIndex = (fileLength > 4) ? 4 : 0;
   // 將讀文件的開始位置移到beginIndex位置。
   randomFile.seek(beginIndex);
   byte[] bytes = new byte[10];
   int byteread = 0;
   // 一次讀10個字節,如果文件內容不足10個字節,則讀剩下的字節。
   // 將一次讀取的字節數賦給byteread
   while ((byteread = randomFile.read(bytes)) != -1) {
    System.out.write(bytes, 0, byteread);
   }
  } catch (IOException e) {
   e.printStackTrace();
  } finally {
   if (randomFile != null) {
    try {
     randomFile.close();
    } catch (IOException e1) {
    }
   }
  }
 }

 /**
  * 顯示輸入流中還剩的字節數
  */
 private static void showAvailableBytes(InputStream in) {
  try {
   System.out.println("當前字節輸入流中的字節數為:" + in.available());
  } catch (IOException e) {
   e.printStackTrace();
  }
 }

 public static void main(String[] args) {
  String fileName = "C:/temp/newTemp.txt";
  ReadFromFile.readFileByBytes(fileName);
  ReadFromFile.readFileByChars(fileName);
  ReadFromFile.readFileByLines(fileName);
  ReadFromFile.readFileByRandomAccess(fileName);
 }
}

以上就是本文的全部?jī)?nèi)容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。

相關文章

  • java對象初始化順序驗證示例

    java對象初始化順序驗證示例

    以下這段小程序?qū)φ{(diào)用對象構造函數時,父類構造函數、成員變量初始化函數,以及非靜態初始化塊調用順序進行驗證,不考慮靜態成員及靜態初始化塊
    2014-02-02
  • Java編程—在測試中考慮多態

    Java編程—在測試中考慮多態

    這篇文章主要介紹了Java編程—在測試中考慮多態,具有一定參考價值,需要的朋友可以了解下。
    2017-11-11
  • Java實現將字符串中的星號*替換為0-9中的數字

    Java實現將字符串中的星號*替換為0-9中的數字

    這篇文章主要為大家詳細介紹了Java如何實現將字符串中的星號*替換為0-9中的數字,并返回所有可能的替換結果,感興趣的小伙伴可以跟隨小編一起學習一下
    2025-07-07
  • 深入理解SpringBoot事務傳播機制

    深入理解SpringBoot事務傳播機制

    本文介紹了SpringBoot中事務傳播機制的原理及其常用配置,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2024-12-12
  • Java實現系統限流的示例代碼

    Java實現系統限流的示例代碼

    限流是保障系統高可用的方式之一,也是大廠高頻面試題,它在微服務系統中,緩存、限流、熔斷是保證系統高可用的三板斧,所以本文我們就來聊聊如何實現系統限流吧
    2023-09-09
  • 小議Java中@param注解與@see注解的作用

    小議Java中@param注解與@see注解的作用

    這篇文章主要介紹了Java中@param注解與@see注解的作用,注解的功能類似于通常代碼中的注釋,需要的朋友可以參考下
    2015-12-12
  • java的==運算符和equals操作詳解

    java的==運算符和equals操作詳解

    在Java中,==和equals都是用于比較兩個對象的操作符,但它們的行為和用途有所不同,這篇文章主要介紹了java的==運算符和equals的相關知識,需要的朋友可以參考下
    2024-08-08
  • Log4j不同模塊輸出到不同的文件中

    Log4j不同模塊輸出到不同的文件中

    這篇文章主要介紹了Log4j不同模塊輸出到不同的文件中 的相關資料,需要的朋友可以參考下
    2016-08-08
  • 基于TCP通信丟包原因總結(推薦)

    基于TCP通信丟包原因總結(推薦)

    下面小編就為大家?guī)?lái)一篇基于TCP通信丟包原因總結(推薦)。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2017-08-08
  • java調用淘寶api聯網查詢ip歸屬地

    java調用淘寶api聯網查詢ip歸屬地

    java聯網查詢IP歸屬地,原理是根據淘寶提供的service查詢IP的歸屬地并且解析http請求返回的json串
    2014-03-03

最新評論