C#中反射和擴展方法如何運用
前段時間做了一個練手的小項目,名叫Book_Bar,用來賣書的,采用的是三層架構,也就是Models,IDAL,DAL,BLL 和 Web , 在DAL層中各個類中有一個方法比較常用,那就是RowToClass ,顧名思義,也就是將DataTable 中的數據封裝到Models 中。結果導致在DAL各個類中寫了很多類似的方法,后來就直接把它抽取出來做成了DataTable和DataRow的擴展方法,下面是代碼:
using System; using System.Collections.Generic; using System.Data; using System.Reflection; namespace DAL { /// <summary> /// 用于給 DataTable和 DataRow擴展方法 /// </summary> public static class TableExtensionMethod { /// <summary> /// 功能: /// 給DataTable擴展了一個方法,能夠?qū)ataTable中的行轉變?yōu)閷?yīng)的class對象,并封裝到List集合中; /// </summary> /// <typeparam name="T">需要轉變成為的class類型</typeparam> /// <param name="table">傳入的DataTable對象</param> /// <returns>返回一個封裝了對應class的List集合</returns> public static List<T> TableToClass<T>(this DataTable table) { Type type = typeof(T); PropertyInfo[] propArr = type.GetProperties();//獲取所有屬性 List<T> list = new List<T>(); DataRowCollection rows = table.Rows; int len = rows[0].ItemArray.Length;//獲取第一行的列數,即class的屬性個數 for (int i = 0; i < rows.Count; i++) { T t = (T)Activator.CreateInstance(type); for (int j = 0; j < len; j++)//這里之所以不使用propArr.Length,是因?yàn)橛行㎝odels的屬性在數據表中不存在對應的列 { propArr[j].SetValue(t, rows[i][j]); } list.Add(t); t = default(T); } return list; } /// <summary> /// 功能: /// DataRow的擴展方法; /// 能夠?qū)ataRow對象封裝到泛型對象中 /// </summary> /// <typeparam name="T">需要轉換成為的class類型</typeparam> /// <param name="row">被轉換的行</param> /// <returns>封裝了行數據的class對象</returns> public static T RowToClass<T>(this DataRow row) { //Type type = Assembly.Load(classFullName).GetType(); Type type = typeof(T); T t = (T)Activator.CreateInstance(type); PropertyInfo[] propArr = type.GetProperties(); int len = row.ItemArray.Length; for (int i = 0; i < len; i++) { propArr[i].SetValue(t, row[i]); } return t; } /// <summary> /// 功能: /// DataRowCollection的擴展方法; /// 能夠?qū)ataRowCollection對象封裝到泛型List集合中 /// </summary> /// <typeparam name="T"></typeparam> /// <param name="rows"></param> /// <returns></returns> public static List<T> RowToClass<T>(this DataRow row, DataRow[] rowArr) { Type type = typeof(T); PropertyInfo[] propArr = type.GetProperties(); int len = rowArr[0].ItemArray.Length;//獲取數據表第一行的列數,即屬性個數 List<T> list = new List<T>(); for (int i = 0; i < rowArr.Length; i++) { T t = (T)Activator.CreateInstance(type); for (int j = 0; j < len; j++) { propArr[j].SetValue(t, rowArr[i][j]); } list.Add(t); t = default(T); } return list; } } }
上面用到了泛型,反射,擴展方法。
之前在使用這行代碼時出了點小問題:
propArr[i].SetValue(t, row[i]);
報了一個類型轉換異常,斷點調試之后發現是因?yàn)?Models 中的屬性的排列和數據表的列的順序不一樣導致的,參照數據表中字段的順序修改過來就好,還有一點就是在循環對屬性進行賦值時,我選用的是數據表中列的個數,而不是屬性的個數,(也就是代碼中這里之所以不使用propArr.Length,是因?yàn)橛行㎝odels的屬性在數據表中不存在對應的列
)。
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
C#使用FileStream循環讀取大文件數據的方法示例
這篇文章主要介紹了C#使用FileStream循環讀取大文件數據的方法,結合實例形式分析了FileStream文件流的形式循環讀取大文件的相關操作技巧,需要的朋友可以參考下2017-05-05WPF仿LiveCharts實現餅圖的繪制
這篇文章主要介紹了如何利用WPF仿LiveCharts實現餅圖的繪制,文中的示例代碼講解詳細,對我們學習或工作有一定幫助,需要的可以參考一下2022-07-07