multicast的兩條命令
ip igmp join-group與ip igmp static-group的區別?
To configure the router to be a statically connected member of the specified group on the interface, use the ip igmp static-group command in interface configuration mode
To have the router join a multicast group, use the ip igmp join-group command in interface configuration mode
以下有例為證
ip igmp static-group 224.5.5.5
(*, 224.5.5.5), 00:01:06/00:02:24, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Loopback0, Forward/Sparse, 00:01:06/00:02:24
ip igmp join-group 224.6.6.6
(*, 224.6.6.6), 00:00:02/00:02:58, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Loopback0, Forward/Sparse, 00:00:02/00:02:58
相關文章
讓以太網線纜在惡劣的工業環境下正常工作
讓以太網線纜在惡劣的工業環境下正常工作...2007-09-09Routeros實例 之 經典安裝與配置
Routeros實例 之 經典安裝與配置...2007-09-09Windows 2003中輕松實現紅外線通信支持正文分析錯誤
Windows 2003中輕松實現紅外線通信支持正文分析錯誤...2007-09-09網吧3個絕對罕見但使工作方便的命令
網吧3個絕對罕見但使工作方便的命令...2007-09-09打開注冊表,看優化軟件在“搞什么鬼”
打開注冊表,看優化軟件在“搞什么鬼”2007-09-09