使用C#創建Windows服務的實例代碼
本文介紹了使用C#創建Windows服務的實例代碼,分享給大家
一、開發環境
操作系統:Windows 10 X64
開發環境:VS2015
編程語言:C#
.NET版本:.NET Framework 4.0
目標平臺:X86
二、創建Windows Service
1、新建一個Windows Service,并將項目名稱改為“MyWindowsService”,如下圖所示:
2、在解決方案資源管理器內將Service1.cs改為MyService1.cs后并點擊“查看代碼”圖標按鈕進入代碼編輯器界面,如下圖所示:
3、在代碼編輯器內如入以下代碼,如下所示:
using System; using System.ServiceProcess; using System.IO; namespace MyWindowsService { public partial class MyService : ServiceBase { public MyService() { InitializeComponent(); } string filePath = @"D:\MyServiceLog.txt"; protected override void OnStart(string[] args) { using (FileStream stream = new FileStream(filePath,FileMode.Append)) using (StreamWriter writer = new StreamWriter(stream)) { writer.WriteLine($"{DateTime.Now},服務啟動!"); } } protected override void OnStop() { using (FileStream stream = new FileStream(filePath, FileMode.Append)) using (StreamWriter writer = new StreamWriter(stream)) { writer.WriteLine($"{DateTime.Now},服務停止!"); } } } }
4、雙擊項目“MyWindowsService”進入“MyService”設計界面,在空白位置右擊鼠標彈出上下文菜單,選中“添加安裝程序”,如下圖所示:
5、此時軟件會生成兩個組件,分別為“serviceInstaller1”及“serviceProcessInstaller1”,如下圖所示:
6、點擊“serviceInstaller1”,在“屬性”窗體將ServiceName改為MyService,Description改為我的服務,StartType保持為Manual,如下圖所示:
7、點擊“serviceProcessInstaller1”,在“屬性”窗體將Account改為LocalSystem(服務屬性系統級別),如下圖所示:
8、鼠標右鍵點擊項目“MyWindowsService”,在彈出的上下文菜單中選擇“生成”按鈕,如下圖所示:
9、至此,Windows服務已經創建完畢。
三、創建安裝、啟動、停止、卸載服務的Windows窗體
1、在同一個解決方案里新建一個Windows Form項目,并命名為WindowsServiceClient,如下圖所示:
2、將該項目設置為啟動項目,并在窗體內添加四個按鈕,分別為安裝服務、啟動服務、停止服務及卸載服務,如下圖所示:
3、按下F7進入代碼編輯界面,引用“System.ServiceProcess”及“System.Configuration.Install”,并輸入如下代碼:
using System; using System.Collections; using System.Windows.Forms; using System.ServiceProcess; using System.Configuration.Install; namespace WindowsServiceClient { public partial class Form1 : Form { public Form1() { InitializeComponent(); } string serviceFilePath = $"{Application.StartupPath}\\MyWindowsService.exe"; string serviceName = "MyService"; //事件:安裝服務 private void button1_Click(object sender, EventArgs e) { if (this.IsServiceExisted(serviceName)) this.UninstallService(serviceName); this.InstallService(serviceFilePath); } //事件:啟動服務 private void button2_Click(object sender, EventArgs e) { if (this.IsServiceExisted(serviceName)) this.ServiceStart(serviceName); } //事件:停止服務 private void button4_Click(object sender, EventArgs e) { if (this.IsServiceExisted(serviceName)) this.ServiceStop(serviceName); } //事件:卸載服務 private void button3_Click(object sender, EventArgs e) { if (this.IsServiceExisted(serviceName)) { this.ServiceStop(serviceName); this.UninstallService(serviceFilePath); } } //判斷服務是否存在 private bool IsServiceExisted(string serviceName) { ServiceController[] services = ServiceController.GetServices(); foreach (ServiceController sc in services) { if (sc.ServiceName.ToLower() == serviceName.ToLower()) { return true; } } return false; } //安裝服務 private void InstallService(string serviceFilePath) { using (AssemblyInstaller installer = new AssemblyInstaller()) { installer.UseNewContext = true; installer.Path = serviceFilePath; IDictionary savedState = new Hashtable(); installer.Install(savedState); installer.Commit(savedState); } } //卸載服務 private void UninstallService(string serviceFilePath) { using (AssemblyInstaller installer = new AssemblyInstaller()) { installer.UseNewContext = true; installer.Path = serviceFilePath; installer.Uninstall(null); } } //啟動服務 private void ServiceStart(string serviceName) { using (ServiceController control = new ServiceController(serviceName)) { if (control.Status == ServiceControllerStatus.Stopped) { control.Start(); } } } //停止服務 private void ServiceStop(string serviceName) { using (ServiceController control = new ServiceController(serviceName)) { if (control.Status == ServiceControllerStatus.Running) { control.Stop(); } } } } }
4、為了后續調試服務及安裝卸載服務的需要,將已生成的MyWindowsService.exe引用到本W(wǎng)indows窗體,如下圖所示:
5、由于需要安裝服務,故需要使用UAC中Administrator的權限,鼠標右擊項目“WindowsServiceClient”,在彈出的上下文菜單中選擇“添加”->“新建項”,在彈出的選擇窗體中選擇“應用程序清單文件”并單擊確定,如下圖所示:
6、打開該文件,并將<requestedExecutionLevel level="asInvoker" uiAccess="false" />改為<requestedExecutionLevel level="requireAdministrator" uiAccess="false" />,如下圖所示:
7、IDE啟動后,將會彈出如下所示的窗體(有的系統因UAC配置有可能不顯示),需要用管理員權限打開:
8、重新打開后,在IDE運行WindowsServiceClient項目;
9、使用WIN+R的方式打開運行窗體,并在窗體內輸入services.msc后打開服務,如下圖所示:
10、點擊窗體內的“安裝服務”按鈕,將會在服務中出現MyService,如下圖所示:
11、點擊“運行服務”按鈕,將啟動并運行服務,如下所示:
12、點擊“停止服務”按鈕,將會停止運行服務,如下圖所示:
13、點擊“卸載服務”按鈕,將會從服務中刪除MyService服務。
14、以上啟動及停止服務將會寫入D:\MyServiceLog.txt,內容如下所示:
源代碼下載:MyWindowsService_jb51.rar
補充:如何調試服務
1、要調試服務,其實很簡單,如需將服務附加進程到需要調試的項目里面即可,假如要調試剛才建的服務,現在OnStop事件里設置斷點,如下所示:
2、啟動“WindowsServiceClient”項目,在“調試”菜單中選擇“附件到進程”(服務必須事先安裝),如下所示:
3、找到“MyWindowsService.exe”,點擊“附加”按鈕,如下圖所示:
4、點擊“停止服務”按鈕,程序?qū)?huì)在設置斷點的地方中斷,如下圖所示:
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
- 圖解如何使用C#創建Windows服務
- C#創建Windows服務的圖文教程
- C#創建Windows服務與服務的安裝、卸載
- C#創建控制Windows服務
- C#用Topshelf創建Windows服務的步驟分享
- C#創建Windows服務的實現方法
- C#通過創建Windows服務啟動程序的方法詳解
- c#創建windows服務入門教程實例
- c#創建windows服務(Windows Services)詳細步驟
- Visual Studio C#創建windows服務程序
相關文章
C#開發微信門戶及應用(4) 關注用戶列表及詳細信息管理
這篇文章主要為大家詳細介紹了C#開發微信門戶及應用第四篇,關注用戶列表及詳細信息管理,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-06-06解析C#設計模式編程中外觀模式Facade Pattern的應用
這篇文章主要介紹了C#設計模式編程中外觀模式Facade Pattern的應用,外觀模式中分為門面(Facade)和子系統(subsystem)兩個角色來進行實現,需要的朋友可以參考下2016-02-02Datagridview使用技巧(9)Datagridview的右鍵菜單
這篇文章主要為大家詳細介紹了Datagridview使用技巧,Datagridview的右鍵菜單,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-05-05c#數據綁定之刪除datatable數據示例
這篇文章主要介紹了c#刪除datatable數據示例,需要的朋友可以參考下2014-04-04