詳解Spring Security如何配置JSON登錄
spring security用了也有一段時間了,弄過異步和多數據源登錄,也看過一點源碼,最近弄rest,然后順便搭oauth2,前端用json來登錄,沒想到spring security默認居然不能獲取request中的json數據,谷歌一波后只在stackoverflow找到一個回答比較靠譜,還是得要重寫filter,于是在這里填一波坑。
準備工作
基本的spring security配置就不說了,網上一堆例子,只要弄到普通的表單登錄和自定義UserDetailsService就可以。因?yàn)樾枰貙慒ilter,所以需要對spring security的工作流程有一定的了解,這里簡單說一下spring security的原理。

spring security 是基于javax.servlet.Filter的,因此才能在spring mvc(DispatcherServlet基于Servlet)前起作用。
- UsernamePasswordAuthenticationFilter:實現Filter接口,負責攔截登錄處理的url,帳號和密碼會在這里獲取,然后封裝成Authentication交給AuthenticationManager進行認證工作
- Authentication:貫穿整個認證過程,封裝了認證的用戶名,密碼和權限角色等信息,接口有一個boolean isAuthenticated()方法來決定該Authentication認證成功沒;
- AuthenticationManager:認證管理器,但本身并不做認證工作,只是做個管理者的角色。例如默認實現ProviderManager會持有一個AuthenticationProvider數組,把認證工作交給這些AuthenticationProvider,直到有一個AuthenticationProvider完成了認證工作。
- AuthenticationProvider:認證提供者,默認實現,也是最常使用的是DaoAuthenticationProvider。我們?cè)谂渲脮r(shí)一般重寫一個UserDetailsService來從數據庫獲取正確的用戶名密碼,其實就是配置了DaoAuthenticationProvider的UserDetailsService屬性,DaoAuthenticationProvider會做帳號和密碼的比對,如果正常就返回給AuthenticationManager一個驗證成功的Authentication
看UsernamePasswordAuthenticationFilter源碼里的obtainUsername和obtainPassword方法只是簡單地調用request.getParameter方法,因此如果用json發送用戶名和密碼會導致DaoAuthenticationProvider檢查密碼時為空,拋出BadCredentialsException。
/**
* Enables subclasses to override the composition of the password, such as by
* including additional values and a separator.
* <p>
* This might be used for example if a postcode/zipcode was required in addition to
* the password. A delimiter such as a pipe (|) should be used to separate the
* password and extended value(s). The <code>AuthenticationDao</code> will need to
* generate the expected password in a corresponding manner.
* </p>
*
* @param request so that request attributes can be retrieved
*
* @return the password that will be presented in the <code>Authentication</code>
* request token to the <code>AuthenticationManager</code>
*/
protected String obtainPassword(HttpServletRequest request) {
return request.getParameter(passwordParameter);
}
/**
* Enables subclasses to override the composition of the username, such as by
* including additional values and a separator.
*
* @param request so that request attributes can be retrieved
*
* @return the username that will be presented in the <code>Authentication</code>
* request token to the <code>AuthenticationManager</code>
*/
protected String obtainUsername(HttpServletRequest request) {
return request.getParameter(usernameParameter);
}
重寫UsernamePasswordAnthenticationFilter
上面UsernamePasswordAnthenticationFilter的obtainUsername和obtainPassword方法的注釋已經說了,可以讓子類來自定義用戶名和密碼的獲取工作。但是我們不打算重寫這兩個方法,而是重寫它們的調用者attemptAuthentication方法,因?yàn)閖son反序列化畢竟有一定消耗,不會反序列化兩次,只需要在重寫的attemptAuthentication方法中檢查是否json登錄,然后直接反序列化返回Authentication對象即可。這樣我們沒有破壞原有的獲取流程,還是可以重用父類原有的attemptAuthentication方法來處理表單登錄。
/**
* AuthenticationFilter that supports rest login(json login) and form login.
* @author chenhuanming
*/
public class CustomAuthenticationFilter extends UsernamePasswordAuthenticationFilter {
@Override
public Authentication attemptAuthentication(HttpServletRequest request, HttpServletResponse response) throws AuthenticationException {
//attempt Authentication when Content-Type is json
if(request.getContentType().equals(MediaType.APPLICATION_JSON_UTF8_VALUE)
||request.getContentType().equals(MediaType.APPLICATION_JSON_VALUE)){
//use jackson to deserialize json
ObjectMapper mapper = new ObjectMapper();
UsernamePasswordAuthenticationToken authRequest = null;
try (InputStream is = request.getInputStream()){
AuthenticationBean authenticationBean = mapper.readValue(is,AuthenticationBean.class);
authRequest = new UsernamePasswordAuthenticationToken(
authenticationBean.getUsername(), authenticationBean.getPassword());
}catch (IOException e) {
e.printStackTrace();
new UsernamePasswordAuthenticationToken(
"", "");
}finally {
setDetails(request, authRequest);
return this.getAuthenticationManager().authenticate(authRequest);
}
}
//transmit it to UsernamePasswordAuthenticationFilter
else {
return super.attemptAuthentication(request, response);
}
}
}
封裝的AuthenticationBean類,用了lombok簡化代碼(lombok幫我們寫getter和setter方法而已)
@Getter
@Setter
public class AuthenticationBean {
private String username;
private String password;
}
WebSecurityConfigurerAdapter配置
重寫Filter不是問題,主要是怎么把這個Filter加到spring security的眾多filter里面。
@Override
protected void configure(HttpSecurity http) throws Exception {
http
.cors().and()
.antMatcher("/**").authorizeRequests()
.antMatchers("/", "/login**").permitAll()
.anyRequest().authenticated()
//這里必須要寫formLogin(),不然原有的UsernamePasswordAuthenticationFilter不會出現,也就無法配置我們重新的UsernamePasswordAuthenticationFilter
.and().formLogin().loginPage("/")
.and().csrf().disable();
//用重寫的Filter替換掉原有的UsernamePasswordAuthenticationFilter
http.addFilterAt(customAuthenticationFilter(),
UsernamePasswordAuthenticationFilter.class);
}
//注冊自定義的UsernamePasswordAuthenticationFilter
@Bean
CustomAuthenticationFilter customAuthenticationFilter() throws Exception {
CustomAuthenticationFilter filter = new CustomAuthenticationFilter();
filter.setAuthenticationSuccessHandler(new SuccessHandler());
filter.setAuthenticationFailureHandler(new FailureHandler());
filter.setFilterProcessesUrl("/login/self");
//這句很關鍵,重用WebSecurityConfigurerAdapter配置的AuthenticationManager,不然要自己組裝AuthenticationManager
filter.setAuthenticationManager(authenticationManagerBean());
return filter;
}
題外話,如果搭自己的oauth2的server,需要讓spring security oauth2共享同一個AuthenticationManager(源碼的解釋是這樣寫可以暴露出這個AuthenticationManager,也就是注冊到spring ioc)
@Override
@Bean // share AuthenticationManager for web and oauth
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
至此,spring security就支持表單登錄和異步j(luò)son登錄了。
參考來源
以上就是本文的全部?jī)?nèi)容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
java中MultipartFile互轉File的方法
本文主要介紹了java中MultipartFile互轉File的方法,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2021-10-10
Java多線程讀寫鎖ReentrantReadWriteLock類詳解
本文詳細講解了Java多線程讀寫鎖ReentrantReadWriteLock類,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2021-12-12
java發送form-data請求實現文件上傳的示例代碼
最近做一個需求,需要請求第三方接口上傳文件,該請求類型是form-data請求,本文就來介紹一下java發送form-data請求實現文件上傳的示例代碼,感興趣的可以了解一下2023-12-12
springboot 自定義404、500錯誤提示頁面的實現
springboot 默認已經提供了一套處理異常的機制。在 springboot 中提供了一個名為 BasicErrorController 的類來處理 /error 請求,然后跳轉到默認顯示異常的頁面來展示異常信息,本文就詳細的介紹一下,感興趣的可以了解一下2021-11-11
spring?boot項目自定義參數校驗規則示例詳解
這篇文章主要介紹了spring boot項目如何自定義參數校驗規則,自定義校驗規則和自帶的規則實現方式一樣,先自定義一個注解,然后指定校驗類,在校驗類里實現具體的校驗規則,本文結合示例代碼給大家介紹的非常詳細,需要的朋友可以參考下2023-07-07
springboot實現添加郵件發送及壓縮功能
這篇文章主要介紹了springboot實現添加郵件發送及壓縮功能 ,非常不錯,具有一定的參考借鑒價值,需要的朋友可以參考下2018-07-07

