redis集群搭建_動力節點Java學院整理
更新時間：2017年08月28日 11:25:19 作者：huangxincheng
這篇文章主要介紹了redis集群搭建,小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
現在項目上用redis的話，很少說不用集群的情況，畢竟如果生產上只有一臺redis會有極大的風險，比如機器掛掉，或者內存爆掉，就比如我們生產環境曾今也遭遇到這種情況，導致redis內存不夠掛掉的情況，當然這些都是我們及其不能容忍的，第一個必須要做到高可靠，其次才是高性能，好了，下面我來逐一搭建一下。
一：Redis集群搭建
1. 下載
首先去官網下載較新的3.2.0版本，下載方式還是非常簡單的，比如官網介紹的這樣。
$ wget http://download.redis.io/releases/redis-3.2.0.tar.gz $ tar xzf redis-3.2.0.tar.gz $ cd redis-3.2.0 $ make
2. redis配置
由于我們要做集群，而且還要redis自帶的redis-trib.rb 能正常運行，我們需要在集群中開啟三臺master，三臺slave，所以這里我需要建立6個文件夾，而且文件夾的名稱就使用端口地址的名字，比如：6389. 6380....6384。
3. config配置。
現在directory的分布情況大致如上圖，接下來要做的事情就是配置redis.conf了，在這里需要配置四個選項。。。
<1> port 端口地址，比如6380文件夾下面的port就是6380，
# Accept connections on the specified port, default is 6379 (IANA #815344). # If port 0 is specified Redis will not listen on a TCP socket. port 6379
<2> cluster-enabled 和 cluster-config-file
這個顧名思義，首先需要開啟redis的cluster模式，然后配置一個cluster-config-file文件，這個文件用于存放redis的實時信息，redis會動態追加和修改這個conf下面的內容信息，不過要記住，這個nodes-6379.conf 可以根據 端口文件夾依次配置，比如6380文件夾可以改成nodes-6380.conf這樣。。。
# Normal Redis instances can't be part of a Redis Cluster; only nodes that are # started as cluster nodes can. In order to start a Redis instance as a # cluster node enable the cluster support uncommenting the following: # cluster-enabled yes # Every cluster node has a cluster configuration file. This file is not # intended to be edited by hand. It is created and updated by Redis nodes. # Every Redis Cluster node requires a different cluster configuration file. # Make sure that instances running in the same system do not have # overlapping cluster configuration file names. # cluster-config-file nodes-6379.conf
<3> directory
為了方便管理，我這里配置的root目錄取決于在哪個文件夾，比如6380下面我的dir就是: dir ./6380/
# Note that you must specify a directory here, not a file name. dir ./6379/
<4> protected-mode
這個是redis 3.2 才追加的一個功能，從功能注釋中，我們就可以發現，這個默認就是不讓外界可以訪問redis，所以這里我們就改為no，可以遠程訪問。
# By default protected mode is enabled. You should disable it only if # you are sure you want clients from other hosts to connect to Redis # even if no authentication is configured, nor a specific set of interfaces # are explicitly listed using the "bind" directive. protected-mode no
ok，到現在為止，我們的config就修改完畢了，其他端口的文件夾也可以依次配置之~
二：開啟redis
到現在為止，各個端口文件夾都配置成功了，接下來準備開啟了。
接下來我們可以看一下，在6379下面是不是有生成node-6379.conf文件，比如下面：
三：配置redis-trib.rb
因為redis-trib.rb是ruby寫的，而我們的電腦肯定是沒有ruby和一些配置依賴項，不過沒關系，有強大的yum安裝，一切都不是問題。
1. 執行replicas命令
[jack@localhost ~]$ cluster/redis-trib.rb create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384 /usr/bin/env: ruby: No such file or directory [jack@localhost ~]$
可以看到ruby是沒有安裝的，所以下一步我們要安裝ruby了。。。
2. 安裝ruby 【一定要是管理員權限哦】
[jack@localhost ~]$ sudo
usage: sudo [-D level] -h | -K | -k | -V
usage: sudo -v [-AknS] [-D level] [-g groupname|#gid] [-p prompt] [-u user
name|#uid]
usage: sudo -l[l] [-AknS] [-D level] [-g groupname|#gid] [-p prompt] [-U user
name] [-u user name|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-r role] [-t type] [-C fd] [-D level] [-g
groupname|#gid] [-p prompt] [-u user name|#uid] [-g groupname|#gid]
[VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-r role] [-t type] [-C fd] [-D level] [-g
groupname|#gid] [-p prompt] [-u user name|#uid] file ...
[jack@localhost ~]$ su
Password:
jacsu: incorrect password
[jack@localhost ~]$ yum install ruby
Loaded plugins: fastestmirror, refresh-packagekit, security
You need to be root to perform this command.
[jack@localhost ~]$ jack
bash: jack: command not found
[jack@localhost ~]$ su
Password:
[root@localhost jack]# yum install ruby
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: mirror.bit.edu.cn
* extras: mirror.bit.edu.cn
* updates: mirror.bit.edu.cn
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package ruby.x86_64 0:1.8.7.374-4.el6_6 will be installed
--> Processing Dependency: ruby-libs = 1.8.7.374-4.el6_6 for package: ruby-1.8.7.374-4.el6_6.x86_64
--> Processing Dependency: libruby.so.1.8()(64bit) for package: ruby-1.8.7.374-4.el6_6.x86_64
--> Running transaction check
---> Package ruby-libs.x86_64 0:1.8.7.374-4.el6_6 will be installed
--> Processing Dependency: libreadline.so.5()(64bit) for package: ruby-libs-1.8.7.374-4.el6_6.x86_64
--> Running transaction check
---> Package compat-readline5.x86_64 0:5.2-17.1.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
ruby x86_64 1.8.7.374-4.el6_6 base 538 k
Installing for dependencies:
compat-readline5 x86_64 5.2-17.1.el6 base 130 k
ruby-libs x86_64 1.8.7.374-4.el6_6 base 1.7 M
Transaction Summary
================================================================================
Install 3 Package(s)
Total download size: 2.3 M
Installed size: 7.8 M
Is this ok [y/N]: y
Downloading Packages:
(1/3): compat-readline5-5.2-17.1.el6.x86_64.rpm | 130 kB 00:00
(2/3): ruby-1.8.7.374-4.el6_6.x86_64.rpm | 538 kB 00:00
(3/3): ruby-libs-1.8.7.374-4.el6_6.x86_64.rpm | 1.7 MB 00:02
--------------------------------------------------------------------------------
Total 747 kB/s | 2.3 MB 00:03
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
Importing GPG key 0xC105B9DE:
Userid : CentOS-6 Key (CentOS 6 Official Signing Key) <centos-6-key@centos.org>
Package: centos-release-6-5.el6.centos.11.1.x86_64 (@anaconda-CentOS-201311272149.x86_64/6.5)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : compat-readline5-5.2-17.1.el6.x86_64 1/3
Installing : ruby-libs-1.8.7.374-4.el6_6.x86_64 2/3
Installing : ruby-1.8.7.374-4.el6_6.x86_64 3/3
Verifying : compat-readline5-5.2-17.1.el6.x86_64 1/3
Verifying : ruby-libs-1.8.7.374-4.el6_6.x86_64 2/3
Verifying : ruby-1.8.7.374-4.el6_6.x86_64 3/3
Installed:
ruby.x86_64 0:1.8.7.374-4.el6_6
Dependency Installed:
compat-readline5.x86_64 0:5.2-17.1.el6 ruby-libs.x86_64 0:1.8.7.374-4.el6_6
Complete!
[root@localhost jack]#
3. 安裝rubygems
接著我們再次運行 replicas命令，看看會怎么樣。。。
[root@localhost jack]# cluster/redis-trib.rb create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384 cluster/redis-trib.rb:24:in `require': no such file to load -- rubygems (LoadError) from cluster/redis-trib.rb:24 [root@localhost jack]#
結果苦逼了，還是報錯，看提示貌似是少了一個rubygems，這次我們還是通過yum安裝。
[root@localhost jack]# yum install -y rubygems Loaded plugins: fastestmirror, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: mirror.bit.edu.cn * extras: mirror.bit.edu.cn * updates: mirror.bit.edu.cn Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package rubygems.noarch 0:1.3.7-5.el6 will be installed --> Processing Dependency: ruby-rdoc for package: rubygems-1.3.7-5.el6.noarch --> Running transaction check ---> Package ruby-rdoc.x86_64 0:1.8.7.374-4.el6_6 will be installed --> Processing Dependency: ruby-irb = 1.8.7.374-4.el6_6 for package: ruby-rdoc-1.8.7.374-4.el6_6.x86_64 --> Running transaction check ---> Package ruby-irb.x86_64 0:1.8.7.374-4.el6_6 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: rubygems noarch 1.3.7-5.el6 base 207 k Installing for dependencies: ruby-irb x86_64 1.8.7.374-4.el6_6 base 317 k ruby-rdoc x86_64 1.8.7.374-4.el6_6 base 381 k Transaction Summary ================================================================================ Install 3 Package(s) Total download size: 905 k Installed size: 3.0 M Downloading Packages: (1/3): ruby-irb-1.8.7.374-4.el6_6.x86_64.rpm | 317 kB 00:00 (2/3): ruby-rdoc-1.8.7.374-4.el6_6.x86_64.rpm | 381 kB 00:00 (3/3): rubygems-1.3.7-5.el6.noarch.rpm | 207 kB 00:00 -------------------------------------------------------------------------------- Total 625 kB/s | 905 kB 00:01 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : ruby-irb-1.8.7.374-4.el6_6.x86_64 1/3 Installing : ruby-rdoc-1.8.7.374-4.el6_6.x86_64 2/3 Installing : rubygems-1.3.7-5.el6.noarch 3/3 Verifying : ruby-rdoc-1.8.7.374-4.el6_6.x86_64 1/3 Verifying : ruby-irb-1.8.7.374-4.el6_6.x86_64 2/3 Verifying : rubygems-1.3.7-5.el6.noarch 3/3 Installed: rubygems.noarch 0:1.3.7-5.el6 Dependency Installed: ruby-irb.x86_64 0:1.8.7.374-4.el6_6 ruby-rdoc.x86_64 0:1.8.7.374-4.el6_6 Complete! [root@localhost jack]#
4. 安裝redis驅動
還是繼續不死心，我們繼續運行replicas命令命令。
[root@localhost jack]# cluster/redis-trib.rb create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384 /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- redis (LoadError) from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from cluster/redis-trib.rb:25 [root@localhost jack]#
還是有問題，這次貌似是一個gem_original_require沒有安裝，當然這個一般是說ruby版本太老了，所以現在親要么升級ruby版本，要么直接安裝ruby的redis驅動。
[root@localhost jack]# gem install redis Successfully installed redis-3.3.0 1 gem installed Installing ri documentation for redis-3.3.0... Installing RDoc documentation for redis-3.3.0...
6. 運行replicas命令
終于貌似所有的依賴我們都解決了，接下來就可以真的執行了。
[root@localhost jack]# cluster/redis-trib.rb create --replicas 1 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 192.168.161.133:6382 192.168.161.133:6383 192.168.161.133:6384 >>> Creating cluster >>> Performing hash slots allocation on 6 nodes... Using 3 masters: 192.168.161.133:6379 192.168.161.133:6380 192.168.161.133:6381 Adding replica 192.168.161.133:6382 to 192.168.161.133:6379 Adding replica 192.168.161.133:6383 to 192.168.161.133:6380 Adding replica 192.168.161.133:6384 to 192.168.161.133:6381 M: fdae457e803e2e04a7c549c69b44a2beefdae3bc 192.168.161.133:6379 slots:0-5460 (5461 slots) master M: 74285cee0fa65e64b443ecc630e447a8a65ee9f8 192.168.161.133:6380 slots:5461-10922 (5462 slots) master M: 14ed067a1b85044325d5800fa8479a6b4e41a10c 192.168.161.133:6381 slots:10923-16383 (5461 slots) master S: c50b1ff1fe3a00b16703f3b5705d2dafe046240b 192.168.161.133:6382 replicates fdae457e803e2e04a7c549c69b44a2beefdae3bc S: 8f7bd92f7ffb48e327820693a5820b5be7ea5556 192.168.161.133:6383 replicates 74285cee0fa65e64b443ecc630e447a8a65ee9f8 S: 4a85ed078b4c99afad7f3a9a8df09082c681a649 192.168.161.133:6384 replicates 14ed067a1b85044325d5800fa8479a6b4e41a10c Can I set the above configuration? (type 'yes' to accept): yes >>> Nodes configuration updated >>> Assign a different config epoch to each node >>> Sending CLUSTER MEET messages to join the cluster Waiting for the cluster to join.... >>> Performing Cluster Check (using node 192.168.161.133:6379) M: fdae457e803e2e04a7c549c69b44a2beefdae3bc 192.168.161.133:6379 slots:0-5460 (5461 slots) master M: 74285cee0fa65e64b443ecc630e447a8a65ee9f8 192.168.161.133:6380 slots:5461-10922 (5462 slots) master M: 14ed067a1b85044325d5800fa8479a6b4e41a10c 192.168.161.133:6381 slots:10923-16383 (5461 slots) master M: c50b1ff1fe3a00b16703f3b5705d2dafe046240b 192.168.161.133:6382 slots: (0 slots) master replicates fdae457e803e2e04a7c549c69b44a2beefdae3bc M: 8f7bd92f7ffb48e327820693a5820b5be7ea5556 192.168.161.133:6383 slots: (0 slots) master replicates 74285cee0fa65e64b443ecc630e447a8a65ee9f8 M: 4a85ed078b4c99afad7f3a9a8df09082c681a649 192.168.161.133:6384 slots: (0 slots) master replicates 14ed067a1b85044325d5800fa8479a6b4e41a10c [OK] All nodes agree about slots configuration. >>> Check for open slots... >>> Check slots coverage... [OK] All 16384 slots covered. [root@localhost jack]#
從上面可以看到，trib程序告知我們是否用 6379，6380，6381 作為主， 6382，6383，6384作為從。。然后我就恩準了。。就這樣我們的集群就創建好了
相關文章
這篇文章主要介紹了muduo源碼分析之TcpServer模塊,本文通過實例圖文相結合給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-04-04
這篇文章主要介紹了通過kubesphere部署redis的方法,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2020-11-11
在本篇文章中小編給大家分享了關于window環境手動操作清理redis緩存的方法和技巧，有興趣的朋友們可以跟著學習下。2019-07-07
這篇文章主要介紹了分割超大Redis數據庫例子,本文講解了分割的需求、分割的思路及分割實例,需要的朋友可以參考下2015-03-03
Redis高效率原因及數據結構分析
這篇文章主要為大家詳細的介紹了Redis高效的原因以及分析了Redis高效的數據結構，有需要的朋友可以借鑒參考下，希望能夠有所幫助2021-09-09
Redis 提供了GEO地理信息定位功能,地理空間項（經度、緯度、名稱）,實現查找附近的人、上班打卡、自行車租賃、搖一搖等相關與地理位置信息的功能,這篇文章主要介紹了Redis GEO地理信息定位功能,需要的朋友可以參考下2023-12-12
緩存Redis，是我們最常用的服務，其適用場景廣泛，被大量應用到各業務場景中。也正因如此，緩存成為了重要的硬件成本來源，我們有必要從空間上做一些優化，降低成本的同時也會提高性能，本文通過代碼示例介紹了redis如何優化緩存空間，需要的朋友可以參考一下2023-04-04
通俗易懂的Redis數據結構基礎教程(入門)
這篇文章主要介紹了通俗易懂的Redis數據結構基礎教程，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2021-03-03
本文講述了Redis瞬時高并發秒殺方案總結，具有很好的參考價值，感興趣的小伙伴們可以參考一下，具體如下：2018-05-05
今天小編就為大家分享一篇關于使用Ruby腳本部署Redis Cluster集群步驟講解，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧2019-01-01