Java異常處理的五個關鍵字
異常:異常有的是因為用戶錯誤引起,有的是程序錯誤引起的,還有其它一些是因為物理錯誤引起的。
異常處理關鍵字:try、catch、finally、throw、throws
注意事項:
- 錯誤不是異常,而是脫離程序員控制的問題。
- 所有的異常類是從 java.lang.Exception 類繼承的子類。
- 異常類有兩個主要的子類:IOException 類和 RuntimeException 類。
- Java有很多的內置異常類。
異常大致分類:
- 用戶輸入了非法數據。
- 要打開的文件不存在。
- 網絡通信時連接中斷,或者JVM內存溢出。
語法:
try{
//需要監聽的代碼塊
}
catch(異常類型 異常名稱/e){
//對捕獲到try監聽到的出錯的代碼塊進行處理
throw 異常名稱/e; //thorw表示拋出異常
throw new 異常類型(“自定義”);
}
finally{
//finally塊里的語句不管異常是否出現,都會被執行
}
修飾符 返回值 方法名 () throws 異常類型{ //throws只是用來聲明異常,是否拋出由方法調用者決定
//代碼塊
}
代碼例子:(try與catch與finally)
public class ExceptionTest {
public static void main(String[] args) {
Scanner input=new Scanner(System.in);
try{ //監聽代碼塊
int a=input.nextInt();
int b=input.nextInt();
double sum=a/b;
System.out.println(sum);
}
catch(InputMismatchException e){
System.out.println("只能輸入數字");
}
catch(ArithmeticException e){
System.out.println("分母不能為0");
}
catch(Exception e){ //Exception是所有異常的父類
System.out.println("發生了其他異常");
}
finally{ //不管是否出現異常,finally一定會被執行
System.out.println("程序結束");
}
}
}
代碼例子:(throw關鍵字)
import java.util.InputMismatchException;
import java.util.Scanner;
public class ExceptionTest {
public static void main(String[] args) {
Scanner input=new Scanner(System.in);
try{ //監聽代碼塊
int a=input.nextInt();
int b=input.nextInt();
double sum=a/b;
System.out.println(sum);
}
catch(InputMismatchException e){ //catch(異常類型 異常名稱)
System.out.println("只能輸入數字");
throw e; //拋出catch捕捉到的異常
//throw new InputMismatchException(); 同上
}
catch(ArithmeticException e){
System.out.println("分母不能為0");
throw new ArithmeticException("分母為0拋出異常"); //拋出ArithmeticException異常
}
catch(Exception e){ //Exception是所有異常的父類
System.out.println("發生了其他異常");
}
finally{ //不管是否出現異常,finally一定會被執行
System.out.println("程序結束");
}
}
}
代碼例子:(throws)
public class Throws {
int a=1;
int b=0;
public void out() throws ArithmeticException{ //聲明可能要拋出的異常,可以有多個異常,逗號隔開
try{ //監聽代碼塊
int sum=a/b;
System.out.println(sum);
}
catch(ArithmeticException e){
System.out.println("分母不能為0");
}
finally{ //不管是否出現異常,finally一定會被執行
System.out.println("程序結束");
}
}
public static void main(String[] args){
Throws t=new Throws();
t.out(); //調用方法
throw new ArithmeticException("分母為0拋出異常"); //由調用的方法決定是否要拋出異常
/*
* 第二種拋出方式
*/
// ArithmeticException a=new ArithmeticException("分母為0拋出異常");
// throw a;
}
}
相關文章
SpringBoot整合HikariCP數據庫連接池方式
這篇文章主要介紹了SpringBoot整合HikariCP數據庫連接池方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-03-03
SpringBoot 添加JSP 支持并附帶在IDEA下創建JSP文件【測試無誤】
這篇文章主要介紹了SpringBoot 添加JSP 支持并附帶在IDEA下創建JSP文件的相關知識,感興趣的朋友跟隨腳本之家小編一起學習吧2018-05-05
postgresql 實現16進制字符串轉10進制數字
這篇文章主要介紹了postgresql 實現16進制字符串轉10進制數字操作,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2021-02-02
在Spring Boot中淺嘗內存泄漏的實戰記錄
本文給大家分享在Spring Boot中淺嘗內存泄漏的實戰記錄,結合實例代碼給大家介紹的非常詳細,感興趣的朋友一起看看吧2025-04-04
SpringBoot中靜態訪問配置屬性的解決方案對比
在SpringBoot開發中,靜態訪問配置信息是一個常見需求,尤其是在工具類中直接獲取配置值,下面我們就來看看幾個常用的方法,大家可以根據需要選擇2025-03-03

