基于SurfaceView實現可拖動視頻控件
更新時間：2018年04月07日 13:50:10 作者：白少木丿
這篇文章主要為大家詳細介紹了基于SurfaceView的可拖動視頻控件，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下
本文實例為大家分享了基于SurfaceView的可拖動視頻控件，供大家參考，具體內容如下
public class DragSurfaceView extends SurfaceView implements View.OnTouchListener {
protected int screenWidth;
protected int screenHeight;
protected int lastX;
protected int lastY;
private int oriLeft;
private int oriRight;
private int oriTop;
private int oriBottom;
private int dragDirection;
private static final int TOP = 0x15;
private static final int LEFT = 0x16;
private static final int BOTTOM = 0x17;
private static final int RIGHT = 0x18;
private static final int LEFT_TOP = 0x11;
private static final int RIGHT_TOP = 0x12;
private static final int LEFT_BOTTOM = 0x13;
private static final int RIGHT_BOTTOM = 0x14;
private static final int CENTER = 0x19;
private int offset = 20;
/**
* 初始化獲取屏幕寬高
*/
protected void initScreenW_H() {
screenHeight = getResources().getDisplayMetrics().heightPixels - 40;
screenWidth = getResources().getDisplayMetrics().widthPixels;
Log.i("DragViewTAG", "DragSurfaceView.initScreenW_H: screenWidth="+screenWidth+", screenHeight="+screenHeight);
}
public DragSurfaceView(Context context) {
super(context);
setOnTouchListener(this);
initScreenW_H();
}
public DragSurfaceView(Context context, AttributeSet attrs) {
super(context, attrs);
setOnTouchListener(this);
initScreenW_H();
}
public DragSurfaceView(Context context, AttributeSet attrs, int defStyleAttr) {
super(context, attrs, defStyleAttr);
setOnTouchListener(this);
initScreenW_H();
}
@Override
public boolean onTouch(View v, MotionEvent event) {
int action = event.getAction();
if (action == MotionEvent.ACTION_DOWN) {
oriLeft = v.getLeft();
oriRight = v.getRight();
oriTop = v.getTop();
oriBottom = v.getBottom();
lastY = (int) event.getRawY();
lastX = (int) event.getRawX();
dragDirection = getDirection(v, (int) event.getX(),
(int) event.getY());
}
// 處理拖動事件
delDrag(v, event, action);
if(action==MotionEvent.ACTION_UP){
dragDirection=0;
}
invalidate();
return true;
}
/**
* 獲取觸摸點flag
*
* @param v
* @param x
* @param y
* @return
*/
protected int getDirection(View v, int x, int y) {
int left = v.getLeft();
int right = v.getRight();
int bottom = v.getBottom();
int top = v.getTop();
if (x < 40 && y < 40) {
return LEFT_TOP;
}
if (y < 40 && right - left - x < 40) {
return RIGHT_TOP;
}
if (x < 40 && bottom - top - y < 40) {
return LEFT_BOTTOM;
}
if (right - left - x < 40 && bottom - top - y < 40) {
return RIGHT_BOTTOM;
}
if (x < 40) {
return LEFT;
}
if (y < 40) {
return TOP;
}
if (right - left - x < 40) {
return RIGHT;
}
if (bottom - top - y < 40) {
return BOTTOM;
}
return CENTER;
}
/**
* 處理拖動事件
*
* @param v
* @param event
* @param action
*/
protected void delDrag(View v, MotionEvent event, int action) {
switch (action) {
case MotionEvent.ACTION_MOVE:
int dx = (int) event.getRawX() - lastX;
int dy = (int) event.getRawY() - lastY;
switch (dragDirection) {
case LEFT: // 左邊緣
left(v, dx);
break;
case RIGHT: // 右邊緣
right(v, dx);
break;
case BOTTOM: // 下邊緣
bottom(v, dy);
break;
case TOP: // 上邊緣
top(v, dy);
break;
case CENTER: // 點擊中心-->>移動
center(v, dx, dy);
break;
case LEFT_BOTTOM: // 左下
left(v, dx);
bottom(v, dy);
break;
case LEFT_TOP: // 左上
left(v, dx);
top(v, dy);
break;
case RIGHT_BOTTOM: // 右下
right(v, dx);
bottom(v, dy);
break;
case RIGHT_TOP: // 右上
right(v, dx);
top(v, dy);
break;
default:
break;
}
v.layout(oriLeft, oriTop, oriRight, oriBottom);
// if (dragDirection != CENTER) {
// v.layout(oriLeft, oriTop, oriRight, oriBottom);
// }
lastX = (int) event.getRawX();
lastY = (int) event.getRawY();
Log.i("DragViewTAG", "DragSurfaceView.delDrag:ACTION_MOVE direction="+dragDirection+", left="+oriLeft+", top="+oriTop+", right="+oriRight+", bottom="+oriBottom);
break;
case MotionEvent.ACTION_UP:
ViewGroup.LayoutParams newLayoutParams = getNewLayoutParams();
if(newLayoutParams!=null){
Log.i("DragViewTAG", "DragSurfaceView.delDrag:ACTION_UP width="+newLayoutParams.width+", height="+newLayoutParams.height);
setLayoutParams(newLayoutParams);
}else {
Log.e("DragViewTAG", "DragSurfaceView.delDrag: 父組件類型？");
v.layout(oriLeft, oriTop, oriRight, oriBottom);
}
break;
default:
break;
}
}
private ViewGroup.LayoutParams getNewLayoutParams(){
if(getLayoutParams() instanceof RelativeLayout.LayoutParams){
RelativeLayout.LayoutParams lp = (RelativeLayout.LayoutParams)getLayoutParams( );
lp.leftMargin = oriLeft;
lp.topMargin = oriTop;
lp.width = oriRight-oriLeft;
lp.height = oriBottom-oriTop;
return lp;
}else if(getLayoutParams() instanceof FrameLayout.LayoutParams) {
FrameLayout.LayoutParams lp = (FrameLayout.LayoutParams) getLayoutParams();
lp.leftMargin = oriLeft;
lp.topMargin = oriTop;
lp.width = oriRight - oriLeft;
lp.height = oriBottom - oriTop;
return lp;
}
return null;
}
/**
* 觸摸點為中心->>移動
*
* @param v
* @param dx
* @param dy
*/
private void center(View v, int dx, int dy) {
oriLeft += dx;
oriTop += dy;
oriRight += dx;
oriBottom += dy;
Log.i("DragViewTAG", "DragSurfaceView.center: v.left="+v.getLeft()+", v.top="+v.getTop());
if (oriLeft < -offset) {
Log.e("DragViewTAG", "DragSurfaceView.center: 左側越界, left="+oriLeft+", offset="+offset);
oriLeft = -offset;
oriRight = oriLeft + v.getWidth();
}
if (oriRight > screenWidth + offset) {
Log.e("DragViewTAG", "DragSurfaceView.center: 右側越界, right="+oriRight+", screenWidth="+screenWidth+", offset="+offset);
oriRight = screenWidth + offset;
oriLeft = oriRight - v.getWidth();
}
if (oriTop < -offset) {
Log.e("DragViewTAG", "DragSurfaceView.center: 頂部越界, top="+oriTop+", offset="+offset);
oriTop = -offset;
oriBottom = oriTop + v.getHeight();
}
if (oriBottom > screenHeight + offset) {
Log.e("DragViewTAG", "DragSurfaceView.center: 底部越界, bottom="+oriBottom+", screenHeight="+screenHeight+", offset="+offset);
oriBottom = screenHeight + offset;
oriTop = oriBottom - v.getHeight();
}
// v.layout(left, top, right, bottom);
}
/**
* 觸摸點為上邊緣
*
* @param v
* @param dy
*/
private void top(View v, int dy) {
oriTop += dy;
if (oriTop < -offset) {
oriTop = -offset;
}
if (oriBottom - oriTop - 2 * offset < 200) {
oriTop = oriBottom - 2 * offset - 200;
}
}
/**
* 觸摸點為下邊緣
*
* @param v
* @param dy
*/
private void bottom(View v, int dy) {
oriBottom += dy;
if (oriBottom > screenHeight + offset) {
oriBottom = screenHeight + offset;
}
if (oriBottom - oriTop - 2 * offset < 200) {
oriBottom = 200 + oriTop + 2 * offset;
}
}
/**
* 觸摸點為右邊緣
*
* @param v
* @param dx
*/
private void right(View v, int dx) {
oriRight += dx;
if (oriRight > screenWidth + offset) {
oriRight = screenWidth + offset;
}
if (oriRight - oriLeft - 2 * offset < 200) {
oriRight = oriLeft + 2 * offset + 200;
}
}
/**
* 觸摸點為左邊緣
*
* @param v
* @param dx
*/
private void left(View v, int dx) {
oriLeft += dx;
if (oriLeft < -offset) {
oriLeft = -offset;
}
if (oriRight - oriLeft - 2 * offset < 200) {
oriLeft = oriRight - 2 * offset - 200;
}
}
/**
* 獲取截取寬度
*
* @return
*/
public int getCutWidth() {
return getWidth() - 2 * offset;
}
/**
* 獲取截取高度
*
* @return
*/
public int getCutHeight() {
return getHeight() - 2 * offset;
}
}
以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
Android實現app開機自啟動功能
這篇文章主要為大家詳細介紹了Android實現app開機自啟動功能，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2022-05-05
Android互聯網訪問圖片并在客戶端顯示的方法
這篇文章主要介紹了Android互聯網訪問圖片并在客戶端顯示的方法,結合實例分析了Android處理圖片的技巧,并附帶了Android的URL封裝類,網絡連接封裝類與輸出流封裝類,需要的朋友可以參考下2015-12-12
Android實現狀態欄(statusbar)漸變效果的示例
本篇文章主要介紹了Android實現狀態欄(statusbar)漸變效果的示例，具有一定的參考價值，感興趣的小伙伴們可以參考一下2017-09-09
這篇文章主要介紹了Android的圖片平鋪效果的實現方法，主要有使用系統API、使用XML配置、自定義繪制三種方法,需要的朋友可以參考下2014-02-02
這篇文章主要介紹了 Android 消息隊列模型詳解及實例的相關資料,需要的朋友可以參考下2017-04-04
Android實現簡單手機震動效果
這篇文章主要為大家詳細介紹了Android實現手機震動效果，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-09-09
Android編程使用Intent傳遞對象的方法分析
這篇文章主要介紹了Android編程使用Intent傳遞對象的方法,結合實例形式詳細分析了Android使用Intent實現傳遞對象的相關技巧與注意事項,需要的朋友可以參考下2016-01-01
android BottomSheetDialog新控件解析實現知乎評論列表效果(實例代碼)
BottomSheetDialog是一個自定義的從底部滑入的對話框，這篇文章主要介紹了android BottomSheetDialog新控件解析實現知乎評論列表效果,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2020-04-04
Android中SurfaceView用法簡單實例
這篇文章主要介紹了Android中SurfaceView用法,以一個簡單的圖形繪制及改變位置實現方法分析了SurfaceView的使用技巧,需要的朋友可以參考下2015-10-10
淺析Android手機衛士手機定位的原理
手機定位的三種方式：網絡定位，基站定位，GPS定位。本文給大家介紹Android手機衛士手機定位的原理，感興趣的朋友一起學習吧2016-04-04