mysql主從復制讀寫分離的配置方法詳解
更新時間：2018年04月09日 08:57:13 作者：dyc2005
一般來說mysql都是通過 主從復制（Master-Slave）的方式來同步數據，再通過讀寫分離（MySQL-Proxy）來提升數據庫的并發負載能力 這樣的方案來進行部署與實施的。
一、說明
前面我們說了mysql的安裝配置,mysql語句使用以及備份恢復mysql數據;本次要介紹的是mysql的主從復制,讀寫分離;及高可用MHA;
環境如下:
master:CentOS7_x64 mysql5.721 172.16.3.175 db1
slave1:CentOS7_x64 mysql5.7.21 172.16.3.235 db2
slave2:CentOS7_x64 mysql5.7.21 172.16.3.235 db3
proxysql/MHA:CentOS7_x64 mysql5.7.21 172.16.3.235 proxysql
架構圖:
說明:
配置測試時為了方便關閉了防火墻頭,selinux安全策略;
現實中請開放防火墻策略;myslqdb的安裝已經有腳本一鍵安裝并配置好;這里就不在重復配置;只對對應的角色貼出對應的配置或安裝與之相關的軟件;
二、主從復制配置
一臺主數據庫,N從節點;從節點開啟兩個線程,通過Slave_IO_Running線程和主節點上有權限的賬號從 主數據庫節點復制binlog日志到本地,能過Slave_SQL_Running線程在本地執行binlog日志,達到主從節點內容同步;
master配置:
egrep -v '(^$|^#)' /usr/local/mysql/etc/my.cnf [mysqld] datadir=/data1/mysqldb socket=/tmp/mysql.sock key_buffer_size = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 query_cache_limit = 1M query_cache_size = 64M query_cache_type = 1 symbolic-links=0 innodb_file_per_table=ON skip_name_resolve=ON server-id = 1 log_bin = /data1/mysqldb/mysql-bin.log [mysqld_safe] log-error=/usr/local/mysql/logs/error.log pid-file=/data1/mysqldb/mysql.pid !includedir /usr/local/mysql/etc/my.cnf.d
創建從節點同步賬號:
mysql > grant replication client,replication slave on *.* to 'repluser'@'172.16.3.%' identified by 'replpass'; mysql > flush privileges; mysql >show master logs; +------------------+-----------+ | Log_name | File_size | +------------------+-----------+ | mysql-bin.000001 | 622 |
主節點上的binlog日志文件及位置;請記下;從節點第一次同步時需要用;slave節點:
egrep -v '(^$|^#)' /usr/local/mysql/etc/my.cnf [mysqld] datadir=/data1/mysqldb socket=/data1/mysqldb/mysql.sock key_buffer_size = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 query_cache_limit = 1M query_cache_size = 64M query_cache_type = 1 symbolic-links=0 innodb_file_per_table=ON skip_name_resolve=ON server-id = 11 #從節點標識ID 各從節點均不一樣 relay_log = relay-log read_only=ON [mysqld_safe] log-error=/usr/local/mysql/log/error.log pid-file=/var/run/mysql/mysql.pid !includedir /usr/local/mysql/etc/my.cnf.d
啟動mysq數據庫
注意:兩臺從節點的server-id 值不一樣;其他的都一樣;因此從節點只展示一個配置文件;
登錄數據庫并同步數據啟動slave
兩臺slave均要同步并啟動
mysql > CHANGE MASTER TO MASTER_HOST="172.16.3.175",MASTER_USER="repluser",MASTER_PASSWORD="replpass",MASTER_PORT=3306,MASTER_LOG_FILE="mysql-bin.000001",MASTER_LOG_POS=622;
mysql > start slave; #啟動從節點()
#查看從節點狀態
mysql > SHOW SLAVE STATUS;
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 172.16.3.175 #主節點
Master_User: repluser #同步賬號
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000001
Read_Master_Log_Pos: 622
Relay_Log_File: relay-log.000001
Relay_Log_Pos: 582
Relay_Master_Log_File: mysql-bin.000001
Slave_IO_Running: Yes #同步線程正常
Slave_SQL_Running: Yes #本地寫線程正常
Replicate_Do_DB: #同步過濾為空(可以只同步某個或某些庫)
Replicate_Ignore_DB: #不同步的庫
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0 #最后同步的錯誤 0表示正常同步
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 622
Relay_Log_Space: 615
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 1
Master_UUID: 57017c43-36e3-11e8-ac76-080027393fc7
Master_Info_File: /data1/mysqldb/master.info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Slave has read all relay log; waiting for more updates
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp:
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set:
Executed_Gtid_Set:
Auto_Position: 0
Replicate_Rewrite_DB:
Channel_Name:
Master_TLS_Version:
1 row in set (0.00 sec)
ERROR:
No query specified
測試主從同步
在master導入測試數據;修改數據并查看slave 中的數據是否一致;
[root@db1 ~]# mysql < Testdb.sql 登錄數據庫 [root@db1 ~]# mysql -uroot -p mysql> show databases; +--------------------+ | Database | +--------------------+ study | +--------------------+ 5 rows in set (0.00 sec) ###study測試數據庫導入成功 mysql> use study; Database changed mysql> show tables; +-----------------+ | Tables_in_study | +-----------------+ | class | | course | | part | | score | | student | | tb31 | | tb32 | | teacher | | test1 | | test2 | | user_info | +-----------------+ 11 rows in set (0.00 sec) #刪除test1 test2表
slave從節點上查看
mysql> show tables; +-----------------+ | Tables_in_study | +-----------------+ | class | | course | | part | | score | | student | | tb31 | | tb32 | | teacher | | user_info | +-----------------+ 9 rows in set (0.00 sec)
數據已經可以正常同步;注意主從同步只需要第一次手動啟動;之后都隨mysql服務自動啟動;主從同步架構只方便了數據的同步,此時如果沒有 第三方工具介入想做到讀寫分離就需要在程序中去做,難免出錯;而出錯了,就需要手動同步數據；這里通過proxysql來做讀寫分離;
三、proxysql之讀寫分離
以上已經完成了主從復制配置;然而這只是一個基本配置,加上一個proxysql實現mysql讀寫分離,proxysql類似haproxy七層代理路由功能且支持MySQL 協議的的數據庫代理；是dba開發給dba使用的;用戶請求發向proxysql,如果是寫請求發往主節點;讀請求發下從節點組中;以此實現讀寫分離;一定程序上減輕了主數據庫的io壓力;
下載安裝proxysql
目前最新版本是1.4.7-1(由于最新版本有問題)
我們這里下載使用1.3.6-1的基于CentOS7的rpm包;下載到本地并yum安裝
[root@proxysql ~]# yum install proxysql-1.3.6-1-centos7.x86_64.rpm -y [root@proxysql ~]# rpm -ql proxysql /etc/init.d/proxysql /etc/proxysql.cnf #主配置文件 /usr/bin/proxysql /usr/share/proxysql/tools/proxysql_galera_checker.sh /usr/share/proxysql/tools/proxysql_galera_writer.pl
配置如下:
在配置proxysql之前需要在主節點配置授權賬號以作proxysql對主從節點操作;另外proxysql上的mysql客戶端工具需要和主從節點上的保持一致;
在主節點master上授權登錄賬號：
mysql > GRANT ALL ON *.* TO 'myadmin'@'172.16.3.%' identified by 'mypass';proxysql.cnf配置
[root@proxysql ~]# egrep -v '(^$|^#)' /etc/proxysql.cnf
datadir="/var/lib/proxysql"
admin_variables=
{
admin_credentials="admin:admin" #proxysql自己的管理用戶名密碼
mysql_ifaces="127.0.0.1:6032;/tmp/proxysql_admin.sock"
}
mysql_variables=
{
threads=4 #線程數,建議和cpu核心數一致
max_connections=2048 #最大連接
default_query_delay=0
default_query_timeout=36000000
have_compress=true
poll_timeout=2000
interfaces="0.0.0.0:3306;/tmp/proxysql.sock" #對外接口
default_schema="information_schema"
stacksize=1048576
server_version="5.5.30"
connect_timeout_server=3000
monitor_username="monitor"
monitor_password="monitor"
monitor_history=600000
monitor_connect_interval=60000
monitor_ping_interval=10000
monitor_read_only_interval=1500
monitor_read_only_timeout=500
ping_interval_server_msec=120000
ping_timeout_server=500
commands_stats=true
sessions_sort=true
connect_retries_on_failure=10
}
#####主從節點的配置
mysql_servers =
(
{
address = "172.16.3.175" # no default, required . If port is 0 , address is interpred as a Unix Socket Domain
port = 3306 # no default, required . If port is 0 , address is interpred as a Unix Socket Domain
hostgroup = 1 # 設置組號
status = "ONLINE" # default: ONLINE
weight = 1 # default: 1
compression = 0 # default: 0
max_connections = 200 ###定義最大的連接
},
{
address = "172.16.3.235" # no default, required . If port is 0 , address is interpred as a Unix Socket Domain
port = 3306 # no default, required . If port is 0 , address is interpred as a Unix Socket Domain
hostgroup = 2 # no default, required
status = "ONLINE" # default: ONLINE
weight = 1 # default: 1
compression = 0 # default: 0
max_connections=1000
},
{
address = "172.16.3.241" # no default, required . If port is 0 , address is interpred as a Unix Socket Domain
port = 3306 # no default, required . If port is 0 , address is interpred as a Unix Socket Domain
hostgroup = 2 # no default, required
status = "ONLINE" # default: ONLINE
weight = 1 # default: 1
compression = 0 # default: 0
max_connections=1000
}
)
mysql_users:
(
{
username = "myadmin" # no default , required
password = "mypass" # default: ''
default_hostgroup = 1 # default: 0
max_connections=1000
default_schema="test"
active = 1 #是否激活
}
)
mysql_query_rules:
(
)
scheduler=
(
)
mysql_replication_hostgroups=
(
{
writer_hostgroup=1 #定義寫組號1
reader_hostgroup=2 #定義讀組號2
comment="test repl 1" #注釋內容
}
)
啟動proxysql服務
[root@proxysql ~]# service proxysql start
測試proxysql
模擬通過proxysql使用數據庫 [root@proxysql ]# mysql -h172.16.3.175 -umyadmin -pmypass mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 17406 Server version: 5.7.21-log MySQL Community Server (GPL) Copyright (c) 2000, 2018, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> mysql > show databases; mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | study | | sys | +--------------------+ 5 rows in set (0.00 sec) ###刪除study數據庫user_info中6 -12之間的數據 刪除之前: mysql> select * from user_info; +-----+-------+------+--------+----------+ | nid | name | age | gender | part_nid | +-----+-------+------+--------+----------+ | 1 | san | 20 | 男 | 1 | | 2 | dong | 29 | 男 | 2 | | 4 | Ling | 28 | 男 | 4 | | 5 | ling | 28 | 男 | 3 | | 6 | dong | 30 | 男 | 1 | | 7 | b | 11 | 女 | 1 | | 8 | c | 12 | 女 | 1 | | 9 | d | 18 | 女 | 4 | | 10 | e | 22 | 男 | 3 | | 11 | f | 23 | 男 | 2 | | 12 | dongy | 22 | 男 | 1 | +-----+-------+------+--------+----------+ 11 rows in set (0.00 sec) 刪除之后: mysql> delete from user_info where nid >6 and nid <12; Query OK, 5 rows affected (0.03 sec) mysql> select * from user_info; +-----+-------+------+--------+----------+ | nid | name | age | gender | part_nid | +-----+-------+------+--------+----------+ | 1 | san | 20 | 男 | 1 | | 2 | dong | 29 | 男 | 2 | | 4 | Ling | 28 | 男 | 4 | | 5 | ling | 28 | 男 | 3 | | 6 | dong | 30 | 男 | 1 | | 12 | dongy | 22 | 男 | 1 | +-----+-------+------+--------+----------+ 6 rows in set (0.00 sec)
到主從節點上查看,會發現以上的查和修改數據都被proxysql正確的代理到后端處理了;
以上看了并不直觀;為了查看proxysql與各主從節點通訊我們?cè)谥鲝墓?jié)點上安裝tcpdump并過濾包
主節點: 類似如下: [root@db1 ~]# tcpdump -i enp0s3 -nn tcp port 3306 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes 18:04:34.678861 IP 172.16.3.254.42191 > 172.16.3.175.3306: Flags [S], seq 3385407732, win 29200, options [mss 1460,sackOK,TS val 17576713 ecr 0,nop,wscale 7], length 0 18:04:34.678908 IP 172.16.3.175.3306 > 172.16.3.254.42191: Flags [S.], seq 1579426335, ack 3385407733, win 28960, options [mss 1460,sackOK,TS val 29413673 ecr 17576713,nop,wscale 7], length 0 18:04:34.680902 IP 172.16.3.254.42191 > 172.16.3.175.3306: Flags [.], ack 1, win 229, options [nop,nop,TS val 17576715 ecr 29413673], length 0 18:04:34.681264 IP 172.16.3.175.3306 > 172.16.3.254.42191: Flags [P.], seq 1:83, ack 1, win 227, options [nop,nop,TS val 29413675 ecr 17576715], length 82 .... 從節點: 類似如下: [root@db2 data1]# tcpdump -i enp0s3 -nn tcp port 3306 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on enp0s3, link-type EN10MB (Ethernet), capture size 262144 bytes 18:02:57.932043 IP 172.16.3.254.42733 > 172.16.3.235.3306: Flags [S], seq 76520456, win 29200, options [mss 1460,sackOK,TS val 17479189 ecr 0,nop,wscale 7], length 0 ...........
proxysql命令行管理接口:支持運行時修改
[root@proxysql]# mysql -u admin -padmin -h 127.0.0.1 -P6032 --prompt='Admin> ' Admin> show databases; +-----+---------+-------------------------------+ | seq | name | file | +-----+---------+-------------------------------+ | 0 | main | | | 2 | disk | /var/lib/proxysql/proxysql.db | | 3 | stats | | | 4 | monitor | | +-----+---------+-------------------------------+ 4 rows in set (0.00 sec)
以上stats,monitor,main都從配置文件中獲取的數據庫;可以通過類似mysql運行時修改;而不需要重啟;
至此我們基于proxysql主從復制讀寫分離架構已經完成;
雙主或多主模型是無須實現讀寫分離，僅需要負載均衡：haproxy, nginx, lvs等;
proxysql并沒有解決,當主數據巖機時的問題;此時就需要量MHA來解決 ;后續再介紹;
相關文章
詳解JDBC數據庫鏈接及相關方法的封裝
這篇文章主要介紹了詳解JDBC數據庫鏈接及相關方法的封裝的相關資料,下面是封裝的具體類，用到了泛型和反射，希望能幫助到大家，需要的朋友可以參考下2017-08-08
MySQL/Oracle數據庫的字符串轉日期、日期轉字符串
在許多數據庫中,你可以使用內置的函數或操作符來進行字符串和日期之間的相互轉換,這篇文章主要給大家介紹了關于MySQL/Oracle數據庫的字符串轉日期、日期轉字符串的相關資料,需要的朋友可以參考下2024-07-07
MySQL存儲過程相互調用并獲得錯誤碼示例
這篇文章主要介紹了MySQL存儲過程相互調用并獲得錯誤碼,需要的朋友可以參考下2014-03-03
MySQL多實例就是，在一臺機器上開啟多個不同的服務端口（如：3306,3307,3308...），運行多個MySQL服務進程，這些服務進程通過不同的socket監聽不同的端口提供服務。2018-04-04
這篇文章主要介紹了mysql建立高效的索引,結合實例形式分析了mysql建立高效索引的相關實現技巧與相關操作注意事項,需要的朋友可以參考下2019-07-07
這篇文章主要介紹了MYSQL大量寫入問題優化詳解，文中優化點解釋的很清楚，讓人看完就明了，感興趣的同學可以閱讀理解下2021-03-03
MySQL是一個開放源碼的小型關聯式數據庫管理系統，被廣泛地應用在Internet上的中小型網站中。接下來通過本篇文章給大家分享安裝MySQL常見的三種方式，需要的朋友可以參考下2015-09-09
MySQL優化之表結構優化的5大建議（數據類型選擇講的很好）
很多人都將 數據庫設計范式 作為數據庫表結構設計“圣經”，認為只要按照這個范式需求設計，就能讓設計出來的表結構足夠優化，既能保證性能優異同時還能滿足擴展性要求2014-03-03
在我們使用mysql的時候,對字段的選用以及具體使用什么類型會很有疑問,下面這篇文章主要給大家介紹了關于MySQL?text能存多少個字符的相關資料,需要的朋友可以參考下2023-01-01
這篇文章主要給大家介紹了關于MySQL 5.7安裝好后打開命令行窗口閃退的解決方法，文中通過圖文介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起看看吧2018-12-12