php無限級評論嵌套實現代碼
我在設計BB的過程中,也一直在思考是否可以不通過遞歸來實現無限級分類的結構展現和父子結構查找,因?yàn)槿绻粚?duì)這里的算法進行優化后果可能是致命的!試想一下,一篇文章如果評論數為300,按正常的遞歸算法,至少就得查詢數據庫301次,而且還是在沒有任何嵌套的情況下,如果有過一兩級嵌套或者評論數過1000,那數據庫不是直接宕掉?
而實際上,PHP強大的數組處理能力已經能幫助我們快速方便的解決這個問題。下圖為一個無限級分類的
數據庫結構:
IDparentID newsID commts
108文章ID為8的評論
21 8對ID為1的評論的回復
328對ID為2的評論的回復
要在前臺嵌套式的展現文章編號8的評論,其實我們只用查詢一次數據庫,即“SELECT * FROM TABLE WHERE newsID=8”,而把后期的遞歸工作交給強大的PHP數組來完成。這里可能涉及的問題就是數組的結構關系的重組,即將所有停留在一級分類上的評論全部放到自己的parentID下,形成children項。
下面將BBComment類中這塊的代碼粘貼出來,希望與大家分享下我的思路,也希望大家能夠提出更好更有效率的算法。
方法一
/** * 按ID條件從評論數組中遞歸查找 * */ function getCommentsFromAryById($commtAry, $id) { if ( !is_array($commtAry) ) return FALSE; foreach($commtAry as $key=>$value) { if ( $value['id'] == $id ) return $value; if ( isset($value['children']) && is_array($children) ) $this->getCommentsFormAryById($value['children'], $id); } } /** * 追加 子評論 到 主評論 中,并形成children子項 * * @param array $commtAry 原評論數據引用 * @param int $parentId 主評論ID * @param array $childrenAry 子評論的值 */ function addChildenToCommentsAry($commtAry, $parentId, $childrenAry) { if ( !is_array($commtAry) ) return FALSE; foreach($commtAry as $key=>$value) { if ( $value['id'] == $parentId ) { $commtAry[$key]['children'][] = $childrenAry; return TRUE; } if ( isset($value['children']) ) $this->addChildenToCommentsAry($commtAry[$key]['children'], $parentId, $childrenAry); } } $result = $this->BBDM->select($table, $column, $condition, 0, 1000); /* 開始進行嵌套評論結構重組 */ array_shift($result); $count = count($result); $i = 0; while( $i<$count ) { if ( '0' != $result[$i]['parentId'] ) { $this->addChildenToCommentsAry($result, $result[$i]['parentId'], $result[$i]); unset($result[$i]); } $i++; } $result = array_values($result); /* 重組結束 */
實現方法二
核心代碼摘自WordPress
<?php $comments = array ( array ( 'id' => '3', 'parent' => '0' ), array ( 'id' => '9', 'parent' => '0' ), array ( 'id' => '1', 'parent' => '3' ), array ( 'id' => '2', 'parent' => '3' ), array ( 'id' => '5', 'parent' => '1' ), array ( 'id' => '7', 'parent' => '1' ) ); function html5_comment($comment) { echo '<li>'; echo 'id:', $comment['id'], ' parent:', $comment['parent']; } function start_el(& $output, $comment) { ob_start(); html5_comment($comment); $output .= ob_get_clean(); } function end_el(& $output) { $output .= "</li><!-- #comment-## -->\n"; } function start_lvl(& $output) { $output .= '<ol class="children">' . "\n"; } function end_lvl(& $output) { $output .= "</ol><!-- .children -->\n"; } function display_element($e, & $children_elements, $max_depth, $depth, & $output) { $id = $e['id']; start_el($output, $e); //當前評論的開始代碼 if ($max_depth > $depth +1 && isset ($children_elements[$id])) { //如果沒超過最大層,并且存在子元素?cái)?shù)組 foreach ($children_elements[$id] as $child) { if (!isset ($newlevel)) { //第一次循環沒設置變量$newlevel,所以把$newlevel設為true,并且開始子元素的開始代碼;第二次及之后的循環,已經設置了$newlevel,就不會再添加子元素的開始代碼。因?yàn)橥慌h(huán)時兄弟元素,所以只需要一個子元素開始代碼,循環內容為并列關系。 $newlevel = true; start_lvl($output); } display_element_template($child, $children_elements, $max_depth, $depth +1, $output); //$child作為參數,繼續去尋找下級元素 } unset ($children_elements[$id]); //用完釋放變量,以后就不會重復判斷該值了,遞歸后繼續判斷剩下的子元素 } if (isset ($newlevel) && $newlevel) { //如果前面找到了子元素,這里就要執行子元素的結束代碼 end_lvl($output); } end_el($output); //當前評論的結束代碼 } function display_element_template($e, & $children_elements, $max_depth, $depth, & $output) { $id = $e['id']; display_element($e, $children_elements, $max_depth, $depth, $output); if ($max_depth <= $depth +1 && isset ($children_elements[$id])) { //如果超出最大層級,并且子元素存在的話,以$child為參數繼續往下找 foreach ($children_elements[$id] as $child) { display_element_template($child, $children_elements, $max_depth, $depth, $output); } unset ($children_elements[$id]); //用完釋放變量 } } function comments_list($comments) { $top_level_elements = array (); $children_elements = array (); foreach ($comments as $e) { if (0 == $e['parent']) { $top_level_elements[] = $e; } else { $children_elements[$e['parent']][] = $e; } } $output = ''; foreach ($top_level_elements as $e) { display_element_template($e, $children_elements, 2, 0, $output); } //var_dump($children_elements);//由于每次用完$children_elements后都會釋放變量,所以到最后$children_elements為空數組 return $output; } echo '<ol class="comment-list">', comments_list($comments), '</ol>';
這篇文章就介紹到這了,其實大家多參考一些開源的cms也可以看到很多不錯的代碼,希望大家以后多多支持腳本之家
相關文章
PHP常量使用的幾個需要注意的地方(謹慎使用PHP中的常量)
常量包含數字字母字符和下劃線,數字允許作為常量名。 常量名的所有字母必須大寫。類常量必須通過 const 定義為類的成員,強烈不鼓勵使用 define 定義的全局常量2014-09-09php的POSIX 函數以及進程測試的深入分析
本篇文章是對php的POSIX函數以及進程測試進行了詳細的分析介紹,需要的朋友參考下2013-06-06PHP實現適用于自定義的驗證碼類
這篇文章主要為大家詳細介紹了PHP實現適用于自定義的驗證碼類,使用對象編寫的驗證碼類,具有一定的參考價值,感興趣的小伙伴們可以參考一下2016-06-06將CMYK顏色值和RGB顏色相互轉換的PHP代碼
本節主要介紹了將CMYK顏色值和RGB顏色相互轉換的PHP代碼,需要的朋友可以參考下2014-07-07PHP實現重載的常用方法實例詳解
這篇文章主要介紹了PHP實現重載的常用方法,結合實例形式對比java分析了php實現重載的四種常見實現技巧,需要的朋友可以參考下2017-10-10PHP目錄與文件操作技巧總結(創建,刪除,遍歷,讀寫,修改等)
這篇文章主要介紹了PHP目錄與文件操作技巧,結合實例形式總結分析了php針對文件與目錄的獲取、運算、打開、創建、讀取、寫入、修改、刪除、判斷等常見操作技巧,需要的朋友可以參考下2016-09-09