php 與 nginx 的處理方式及nginx與php-fpm通信的兩種方式
先給大家介紹下php 與 nginx 的兩種處理方式,具體內容如下所示:
1.IP:Port 監聽方式
php-fpm docker pull PHP:2.4-alpine nginx.conf fastcgi_pass 127.0.0.1:9000;
php-fpm 在容器里的 nginx.conf
location /php { proxy_set_header Host $host:$server_port; proxy_pass http://138.38.38.111:80/; }
2.UDS 方式監聽
php-fpm listen = /tmp/php-fpm.sock nginx.conf fastcgi_pass unix:/tmp/php-fpm.sock;
3.注意
php-fpm用ip:port方式建立鏈接,
nginx不要用unix socket方式建立鏈接,用ip:port方式建立連接就行
下面看下nginx與php-fpm通信的兩種方式
在linux中,nginx服務器和php-fpm可以通過tcp socket和unix socket兩種方式實現。
unix socket是一種終端,可以使同一臺操作系統上的兩個或多個進程進行數據通信。這種方式需要再nginx配置文件中填寫php-fpm的pid文件位置,效率要比tcp socket高。
tcp socket的優點是可以跨服務器,當nginx和php-fpm不在同一臺機器上時,只能使用這種方式。
windows系統只能使用tcp socket的通信方式
配置方法
tcp socket
tcp socket通信方式,需要在nginx配置文件中填寫php-fpm運行的ip地址和端口號。
location ~ \.php$ { include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; }
unix socket
unix socket通信方式,需要在nginx配置文件中填寫php-fpm運行的pid文件地址。
location ~ \.php$ { include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; }
php-fpm的運行端口號和socket文件的地址都是在php-fpm.conf中配置的。
php-fpm.conf文件在php安裝文件的/etc目錄下,
比如你的php安裝在/opt/php目錄,則應該是/opt/php/php-fpm.conf。
; The address on which to accept FastCGI requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on ; a specific port; ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on ; a specific port; ; 'port' - to listen on a TCP socket to all IPv4 addresses on a ; specific port; ; '[::]:port' - to listen on a TCP socket to all addresses ; (IPv6 and IPv4-mapped) on a specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. listen = 127.0.0.1:9000 listen = /var/run/php-fpm.sock
通過注釋可以看到,php-fpm的listen指令可以通過五種方式處理FastCGI請求,分別是:
1. ipv4:端口號
2. ipv6:端口號
3. port相當于 0.0.0.0:port,本機所有ipv4對應的端口號
4. [::]:port,包括ipv4和ipv6
5. unix socket文件
直接配置使用unix socket文件之后,會遇到access deny的問題,由于socket文件本質上還是一個文件,存在權限控制問題,默認由root用戶創建,因此nginx進程無權限訪問,應該配置如下命令:
; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many ; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0660 listen.owner = www listen.group = www listen.mode = 0660
可以配置nginx和php-fpm都是用www用戶,這樣就不會存在權限問題,當然也可以創建不同的用戶,然后加入同一個組,便于分配權限。
總結
以上所述是小編給大家介紹的php 與 nginx 的兩種處理方式及nginx與php-fpm通信的兩種方式,希望對大家有所幫助,如果大家有任何疑問請給我留言,小編會及時回復大家的。在此也非常感謝大家對腳本之家網站的支持!
- Nginx和PHP-FPM的啟動、重啟、停止腳本分享
- 安裝配置php-fpm來搭建Nginx+PHP的生產環境
- nginx調用php-fpm出錯解決方法和nginx配置詳解
- 實現Nginx中使用PHP-FPM時記錄PHP錯誤日志的配置方法
- nginx php-fpm中啟用慢日志配置(用于檢測執行較慢的PHP腳本)
- ubuntu10.04配置 nginx+php-fpm模式的詳解
- nginx加php-fpm出現502 bad gateway錯誤的5種解決方法
- nginx+php-fpm配置文件的組織結構介紹
- PHP-FPM和Nginx的通信機制詳解
相關文章
laravel框架中控制器的創建和使用方法分析
這篇文章主要介紹了laravel框架中控制器的創建和使用方法,結合實例形式詳細分析了laravel框架控制器的原理、創建、使用方法及相關注意事項,需要的朋友可以參考下2019-11-11Yii 框架應用(Applications)操作實例詳解
這篇文章主要介紹了Yii 框架應用(Applications)操作,結合實例形式詳細分析了Yii 框架應用(Applications)基本配置、屬性、事件相關操作技巧與注意事項,需要的朋友可以參考下2020-05-05yii gridview實現時間段篩選功能
這篇文章主要為大家詳細介紹了yii gridview實現時間段篩選功能,一個輸入框,自動提交功能,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-08-08