Spring MVC學習教程之RequestMappingHandlerMapping匹配
前言
對于RequestMappingHandlerMapping,使用Spring的同學基本都不會陌生,該類的作用有兩個:
- 通過request查找對應的HandlerMethod,即當前request具體是由Controller中的哪個方法進行處理;
- 查找當前系統中的Interceptor,將其與HandlerMethod封裝為一個HandlerExecutionChain。
本文主要講解RequestMappingHandlerMapping是如何獲取HandlerMethod和Interceptor,并且將其封裝為HandlerExecutionChain的。
下面話不多說了,來一起看看詳細的介紹吧
1.整體封裝結構
RequestMappingHandlerMapping實現了HandlerMapping接口,該接口的主要方法如下:
public interface HandlerMapping {
// 通過request獲取HandlerExecutionChain對象
HandlerExecutionChain getHandler(HttpServletRequest request) throws Exception;
}
這里我們直接看RequestMappingHandlerMapping是如何實現該接口的:
@Override
@Nullable
public final HandlerExecutionChain getHandler(HttpServletRequest request)
throws Exception {
// 通過request獲取具體的處理bean,這里handler可能有兩種類型:HandlerMethod和String。
// 如果是String類型,那么就在BeanFactory中查找該String類型的bean,需要注意的是,返回的
// bean如果是需要使用RequestMappingHandlerAdapter處理,那么也必須是HandlerMethod類型的
Object handler = getHandlerInternal(request);
if (handler == null) {
// 如果找不到處理方法,則獲取自定義的默認handler
handler = getDefaultHandler();
}
if (handler == null) {
return null;
}
if (handler instanceof String) {
// 如果獲取的handler是String類型的,則在當前BeanFactory中獲取該名稱的bean,
// 并將其作為handler返回
String handlerName = (String) handler;
handler = obtainApplicationContext().getBean(handlerName);
}
// 獲取當前系統中配置的Interceptor,將其與handler一起封裝為一個HandlerExecutionChain
HandlerExecutionChain executionChain = getHandlerExecutionChain(handler, request);
// 這里CorsUtils.isCorsRequest()方法判斷的是當前請求是否為一個跨域的請求,如果是一個跨域的請求,
// 則將跨域相關的配置也一并封裝到HandlerExecutionChain中
if (CorsUtils.isCorsRequest(request)) {
CorsConfiguration globalConfig =
this.globalCorsConfigSource.getCorsConfiguration(request);
CorsConfiguration handlerConfig = getCorsConfiguration(handler, request);
CorsConfiguration config = (globalConfig != null ?
globalConfig.combine(handlerConfig) : handlerConfig);
executionChain = getCorsHandlerExecutionChain(request, executionChain, config);
}
return executionChain;
}
從上面的代碼可以看出,對于HandlerExecutionChain的獲取,RequestMappingHandlerMapping首先會獲取當前request對應的handler,然后將其與Interceptor一起封裝為一個HandlerExecutionChain對象。這里在進行封裝的時候,Spring會對當前request是否為跨域請求進行判斷,如果是跨域請求,則將相關的跨域配置封裝到HandlerExecutionChain中,關于跨域請求,讀者可以閱讀跨域資源共享 CORS 詳解。
2. 獲取HandlerMethod
關于RequestMappingHandlerMapping是如何獲取handler的,其主要在getHandlerInternal()方法中,如下是該方法的源碼:
@Override
protected HandlerMethod getHandlerInternal(HttpServletRequest request) throws Exception {
// 獲取當前request的URI
String lookupPath = getUrlPathHelper().getLookupPathForRequest(request);
if (logger.isDebugEnabled()) {
logger.debug("Looking up handler method for path " + lookupPath);
}
// 獲取注冊的Mapping的讀鎖
this.mappingRegistry.acquireReadLock();
try {
// 通過path和request查找具體的HandlerMethod
HandlerMethod handlerMethod = lookupHandlerMethod(lookupPath, request);
if (logger.isDebugEnabled()) {
if (handlerMethod != null) {
logger.debug("Returning handler method [" + handlerMethod + "]");
} else {
logger.debug("Did not find handler method for [" + lookupPath + "]");
}
}
// 如果獲取到的bean是一個String類型的,則在BeanFactory中查找該bean,
// 并將其封裝為一個HandlerMethod對象
return (handlerMethod != null ? handlerMethod.createWithResolvedBean() : null);
} finally {
// 釋放當前注冊的Mapping的讀鎖
this.mappingRegistry.releaseReadLock();
}
}
上述方法中,其首先會獲取當前request的uri,然后通過uri查找HandlerMethod,并且在最后,會判斷獲取到的HandlerMethod中的bean是否為String類型的,如果是,則在當前BeanFactory中查找該名稱的bean,并且將其封裝為HandlerMethod對象。這里我們直接閱讀lookupHandlerMethod()方法:
@Nullable
protected HandlerMethod lookupHandlerMethod(String lookupPath,
HttpServletRequest request) throws Exception {
List<Match> matches = new ArrayList<>();
// 通過uri直接在注冊的RequestMapping中獲取對應的RequestMappingInfo列表,需要注意的是,
// 這里進行查找的方式只是通過url進行查找,但是具體哪些RequestMappingInfo是匹配的,還需要進一步過濾
List<T> directPathMatches = this.mappingRegistry.getMappingsByUrl(lookupPath);
if (directPathMatches != null) {
// 對獲取到的RequestMappingInfo進行進一步過濾,并且將過濾結果封裝為一個Match列表
addMatchingMappings(directPathMatches, matches, request);
}
if (matches.isEmpty()) {
// 如果無法通過uri進行直接匹配,則對所有的注冊的RequestMapping進行匹配,這里無法通過uri
// 匹配的情況主要有三種:
// ①在RequestMapping中定義的是PathVariable,如/user/detail/{id};
// ②在RequestMapping中定義了問號表達式,如/user/?etail;
// ③在RequestMapping中定義了*或**匹配,如/user/detail/**
addMatchingMappings(this.mappingRegistry.getMappings().keySet(),
matches, request);
}
if (!matches.isEmpty()) {
// 對匹配的結果進行排序,獲取相似度最高的一個作為結果返回,這里對相似度的判斷時,
// 會判斷前兩個是否相似度是一樣的,如果是一樣的,則直接拋出異常,如果不相同,
// 則直接返回最高的一個
Comparator<Match> comparator = new MatchComparator(getMappingComparator(request));
matches.sort(comparator);
if (logger.isTraceEnabled()) {
logger.trace("Found " + matches.size()
+ " matching mapping(s) for [" + lookupPath + "] : " + matches);
}
// 獲取匹配程度最高的一個匹配結果
Match bestMatch = matches.get(0);
if (matches.size() > 1) {
// 如果匹配結果不止一個,首先會判斷是否是跨域請求,如果是,
// 則返回PREFLIGHT_AMBIGUOUS_MATCH,如果不是,則會判斷前兩個匹配程度是否相同,
// 如果相同則拋出異常
if (CorsUtils.isPreFlightRequest(request)) {
return PREFLIGHT_AMBIGUOUS_MATCH;
}
Match secondBestMatch = matches.get(1);
if (comparator.compare(bestMatch, secondBestMatch) == 0) {
Method m1 = bestMatch.handlerMethod.getMethod();
Method m2 = secondBestMatch.handlerMethod.getMethod();
throw new IllegalStateException("Ambiguous handler methods mapped for"
+ " HTTP path '" + request.getRequestURL() + "': {" + m1
+ ", " + m2 + "}");
}
}
// 這里主要是對匹配結果的一個處理,主要包含對傳入?yún)?shù)和返回的MediaType的處理
handleMatch(bestMatch.mapping, lookupPath, request);
return bestMatch.handlerMethod;
} else {
// 如果匹配結果是空的,則對所有注冊的Mapping進行遍歷,判斷當前request具體是哪種情況導致
// 的無法匹配:①RequestMethod無法匹配;②Consumes無法匹配;③Produces無法匹配;
// ④Params無法匹配
return handleNoMatch(this.mappingRegistry.getMappings().keySet(),
lookupPath, request);
}
}
這里對于結果的匹配,首先會通過uri進行直接匹配,如果能匹配到,則在匹配結果中嘗試進行RequestMethod,Consumes和Produces等配置的匹配;如果通過uri不能匹配到,則直接對所有定義的RequestMapping進行匹配,這里主要是進行正則匹配,如果能匹配到。如果能夠匹配到,則對匹配結果按照相似度進行排序,并且對前兩個結果相似度進行比較,如果相似度一樣,則拋出異常,如果不一樣,則返回相似度最高的一個匹配結果。如果無法獲取到匹配結果,則對所有的匹配結果進行遍歷,判斷當前request具體是哪一部分參數無法匹配到結果。對于匹配結果的獲取,主要在addMatchingMappings()方法中,這里我們繼續閱讀該方法的源碼:
private void addMatchingMappings(Collection<T> mappings, List<Match> matches,
HttpServletRequest request) {
for (T mapping : mappings) {
T match = getMatchingMapping(mapping, request);
if (match != null) {
matches.add(new Match(match,
this.mappingRegistry.getMappings().get(mapping)));
}
}
}
對于RequestMapping的匹配,這里邏輯比較簡單,就是對所有的RequestMappingInfo進行遍歷,然后將request分別于每個RequestMappingInfo進行匹配,如果匹配上了,其返回值就不為空,最后將所有的匹配結果返回。如下是getMatchingMapping()方法的源碼(其最終調用的是RequestMappingInfo.getMatchingCondition()方法):
@Override
@Nullable
public RequestMappingInfo getMatchingCondition(HttpServletRequest request) {
// 判斷request請求的類型是否與當前RequestMethod匹配
RequestMethodsRequestCondition methods =
this.methodsCondition.getMatchingCondition(request);
// 判斷request請求的參數是否與RequestMapping中params參數配置的一致
ParamsRequestCondition params = this.paramsCondition.getMatchingCondition(request);
// 判斷request請求的headers是否與RequestMapping中headers參數配置的一致
HeadersRequestCondition headers = this.headersCondition.getMatchingCondition(request);
// 判斷request的請求體類型是否與RequestMapping中配置的consumes參數配置的一致
ConsumesRequestCondition consumes =
this.consumesCondition.getMatchingCondition(request);
// 判斷當前RequestMapping將要返回的請求體類型是否與request中Accept的header指定的一致
ProducesRequestCondition produces =
this.producesCondition.getMatchingCondition(request);
// 對于上述幾個判斷,如果匹配上了,那么其返回值都不會為空,因而這里會對每個返回值都進行判斷,
// 如果有任意一個為空,則說明沒匹配上,那么就返回null
if (methods == null || params == null || headers == null
|| consumes == null || produces == null) {
return null;
}
// 對于前面的匹配,都是一些靜態屬性的匹配,其中最重要的uri的匹配,主要是正則匹配,
// 就是在下面這個方法中進行的
PatternsRequestCondition patterns =
this.patternsCondition.getMatchingCondition(request);
// 如果URI沒匹配上,則返回null
if (patterns == null) {
return null;
}
// 這里主要是對用戶自定義的匹配條件進行匹配
RequestConditionHolder custom =
this.customConditionHolder.getMatchingCondition(request);
if (custom == null) {
return null;
}
// 如果上述所有條件都匹配上了,那么就將匹配結果封裝為一個RequestMappingInfo返回
return new RequestMappingInfo(this.name, patterns, methods, params, headers,
consumes, produces, custom.getCondition());
}
可以看到,對于一個RequestMapping的匹配,主要包括:RequestMethod,Params,Headers,Consumes,Produces,Uri和自定義條件的匹配,如果這幾個條件都匹配上了,才能表明當前RequestMapping與request匹配上了。
3. Interceptor的封裝
關于Inteceptor的封裝,由前述第一點可以看出,其主要在getHandlerExecutionChain()方法中,如下是該方法的源碼:
protected HandlerExecutionChain getHandlerExecutionChain(Object handler,
HttpServletRequest request) {
// 將當前handler封裝到HandlerExecutionChain對象中
HandlerExecutionChain chain = (handler instanceof HandlerExecutionChain ?
(HandlerExecutionChain) handler : new HandlerExecutionChain(handler));
// 獲取當前request的URI,用于MappedInterceptor的匹配
String lookupPath = this.urlPathHelper.getLookupPathForRequest(request);
// 對當前所有注冊的Interceptor進行遍歷,如果其是MappedInterceptor類型,則調用其matches()
// 方法,判斷當前Interceptor是否能夠應用于該request,如果可以,則添加到HandlerExecutionChain中
for (HandlerInterceptor interceptor : this.adaptedInterceptors) {
if (interceptor instanceof MappedInterceptor) {
MappedInterceptor mappedInterceptor = (MappedInterceptor) interceptor;
if (mappedInterceptor.matches(lookupPath, this.pathMatcher)) {
chain.addInterceptor(mappedInterceptor.getInterceptor());
}
} else {
// 如果當前Interceptor不是MappedInterceptor類型,則直接將其添加到
// HandlerExecutionChain中
chain.addInterceptor(interceptor);
}
}
return chain;
}
對于攔截器,理論上,Spring是會將所有的攔截器都進行一次調用,對于是否需要進行攔截,都是用戶自定義實現的。這里如果對于URI有特殊的匹配,可以使用MappedInterceptor,然后實現其matches()方法,用于判斷當前MappedInterceptor是否能夠應用于當前request。
4. 小結
本文首先講解了Spring是如何通過request進行匹配,從而找到具體處理當前請求的RequestMapping的,然后講解了Spring是如何封裝Interceptor,將HandlerMethod和Interceptor封裝為一個HandlerExecutionChain的。
總結
以上就是這篇文章的全部?jī)?nèi)容了,希望本文的內容對大家的學習或者工作具有一定的參考學習價值,如果有疑問大家可以留言交流,謝謝大家對腳本之家的支持。
相關文章
Java實現EasyCaptcha圖形驗證碼的具體使用
Java圖形驗證碼,支持gif、中文、算術等類型,可用于Java Web、JavaSE等項目,下面就跟隨小編一起來了解一下2021-08-08
Servlet實現簡單的用戶登錄功能實例代碼
這篇文章主要給大家介紹了關于利用Servlet實現簡單的用戶登錄功能的相關資料,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-12-12
logback 實現給變量指定默認值
這篇文章主要介紹了logback 實現給變量指定默認值操作,具有很好的參考家價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-08-08
Spring Boot整合EasyExcel(完整版包含上傳解析excel和下載模板)
這篇文章主要介紹了Spring Boot整合EasyExcel(完整版包含上傳解析excel和下載模板),文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-12-12
Java基于MySQL實現學生管理系統
這篇文章主要為大家詳細介紹了Java基于MySQL實現學生管理系統,具有一定的參考價值,感興趣的小伙伴們可以參考一下2018-01-01

