connectionPoolSettings = ConnectionPoolSettings.builder()
                            .minSize(getMinConnectionsPerHost())
                            .maxSize(getConnectionsPerHost())
                            .maxWaitQueueSize(getThreadsAllowedToBlockForConnectionMultiplier()
                                     * getConnectionsPerHost())
                            .maxWaitTime(getMaxWaitTime(), MILLISECONDS)
                            .maxConnectionIdleTime(getMaxConnectionIdleTime(), MILLISECONDS)
                            .maxConnectionLifeTime(getMaxConnectionLifeTime(), MILLISECONDS)
                            .build();

  public static class Builder {
    private String description;
    private String applicationName;
    //讀取偏好, 這里默認的是從主節點讀取.
    private ReadPreference readPreference = ReadPreference.primary();
    //使用服務器默認的寫關注?
    private WriteConcern writeConcern = WriteConcern.ACKNOWLEDGED;
    //使用服務的默認讀關注,默認是local
    private ReadConcern readConcern = ReadConcern.DEFAULT;
    private CodecRegistry codecRegistry = MongoClient.getDefaultCodecRegistry();
    private final List<CommandListener> commandListeners = new ArrayList<CommandListener>();
    private final List<ClusterListener> clusterListeners = new ArrayList<ClusterListener>();
    private final List<ServerListener> serverListeners = new ArrayList<ServerListener>();
    private final List<ServerMonitorListener> serverMonitorListeners = new ArrayList<ServerMonitorListener>();

    private int minConnectionsPerHost;
    private int maxConnectionsPerHost = 100;
    private int threadsAllowedToBlockForConnectionMultiplier = 5;
    //設置服務器選擇超時（以毫秒為單位），它定義驅動程序在拋出異常之前等待服務器選擇成功的時間
    //值為0表示如果沒有可用的服務器，它將立即超時。 負值意味著無限期等待
    private int serverSelectionTimeout = 1000 * 30;
    //線程等待連接變?yōu)榭捎玫淖铋L時間
    private int maxWaitTime = 1000 * 60 * 2;
    // 線程池中連接的最大空閑時間
    private int maxConnectionIdleTime;
    private int maxConnectionLifeTime;
    //連接超時時間,必須大于0
    private int connectTimeout = 1000 * 10;
    //socket超時時間
    private int socketTimeout = 0;
    //socket是否?；?
    private boolean socketKeepAlive = false;
    private boolean sslEnabled = false;
    private boolean sslInvalidHostNameAllowed = false;
    private boolean alwaysUseMBeans = false;
    //設置心跳頻率。 這是驅動程序?qū)L試確定群集中每個服務器的當前狀態的頻率。 默認值為10,000毫秒
    private int heartbeatFrequency = 10000;
    //設置最小心跳頻率。 如果驅動程序必須經常重新檢查服務器的可用性，它將至少在上一次檢查后等待很長時間，以避免浪費精力。 默認值為500毫秒。
    private int minHeartbeatFrequency = 500;
    //設置用于集群心跳的連接的連接超時
    private int heartbeatConnectTimeout = 20000;
    //設置用于集群心跳的連接的套接字超時
    private int heartbeatSocketTimeout = 20000;
    //本地閾值
    private int localThreshold = 15;

    private String requiredReplicaSetName;
    private DBDecoderFactory dbDecoderFactory = DefaultDBDecoder.FACTORY;
    private DBEncoderFactory dbEncoderFactory = DefaultDBEncoder.FACTORY;
    private SocketFactory socketFactory;
    private boolean cursorFinalizerEnabled = true;
...}

//讀取偏好, 首先從從節點讀取.
private ReadPreference readPreference = ReadPreference.secondaryPreferred();
//寫關注為1 ,寫入主節點即返回.
private WriteConcern writeConcern = WriteConcern.W1;
//使用服務的默認讀關注,默認是local(決定到某個讀取數據時，能讀到什么樣的數據)
private ReadConcern readConcern = ReadConcern.LOCAL;

//線程池空閑時保持的最小連接數

minConnectionsPerHost=20

//線程池允許的最大連接數

connectionsPerHost=100

//connectionsPerHost* 5 =最大隊列數

threadsAllowedToBlockForConnectionMultiplier=5

//線程池中連接的最大空閑時間,5分鐘

maxConnectionIdleTime = 5*60*1000

 // 線程池中連接的最長生存時間,采用默認值

maxConnectionLifeTime

//設置服務器選擇超時（以毫秒為單位），它定義驅動程序在拋出異常之前等待服務器選擇成功的時間
//值為0表示如果沒有可用的服務器，它將立即超時。 負值意味著無限期等待
private int serverSelectionTimeout = 1000 * 30;

//連接超時時間,必須大于0
private int connectTimeout = 1000 * 5;

//線程等待連接變?yōu)榭捎玫淖铋L時間.

maxWaitTime=6000