#include <opencv2/highgui/highgui.hpp>

//#include <iostream> 
//using namespace std; 
using namespace cv;

int win_width=1400,win_height=700;
Mat image,win_image;       //申明全局變量
Rect rect_win,rect_img;

void moveImage()//實現移動圖像
{ 
 Mat image_ROI=image(rect_img);  // 定義源圖像感興趣區域ROI（需要顯示的區域）
 image_ROI.convertTo(win_image,image_ROI.type());  // image_ROI 復制到 win_image
 ////也可以直接用 Mat win_image=image(rect_img); //但是很卡 Why？
 imshow("拼接結果",win_image);
}

void on_mouse( int event, int x, int y, int flags, void* ustc) //int x,int y，代表鼠標位于窗口的（x，y）坐標位置，窗口左上角默認為原點，向右為x軸，向下為y軸
{
  // static聲明靜態局部變量，值在函數調用結束后不消失而保留原值，
  //即其占用的存儲單元不釋放，在下次該函數調用時，該變量保留上一次函數調用結束時的值
  static Point p0; 
  static int xrect_img;  //左鍵按下時，窗口顯示圖像左上角在源圖像中x、y
  static int yrect_img;
 if(event==CV_EVENT_LBUTTONDOWN)
 {
  p0=Point(x,y); //獲取鼠標左鍵按下時的起始點
   xrect_img=rect_img.x;
   yrect_img=rect_img.y;
 }
 if(event==CV_EVENT_MOUSEMOVE&& (flags & CV_EVENT_LBUTTONDOWN)) //左鍵按下，鼠標移動時
 {  
   int dx=x-p0.x;
   int dy=y-p0.y;  
   if(x>=0 && x<=win_width-1 && y>=0 && y<=win_height-1) //判斷鼠標是否在窗口圖像區域內
   {   
    rect_img=Rect(xrect_img-dx,yrect_img-dy,rect_img.width,rect_img.height);  //窗口顯示圖像移動dx、dy（相對于鼠標左鍵按下時）
    if(rect_img.x<0) 
    { 
     rect_img.x=0; 
    } 
    if(rect_img.y<0) 
    { 
     rect_img.y=0; 
    }   
    if(rect_img.x > image.cols-rect_img.width-1) 
    { 
     rect_img.x=image.cols-rect_img.width-1; 
    } 
    if(rect_img.y > image.rows - rect_img.height-1) 
    { 
     rect_img.y=image.rows - rect_img.height-1; 
    } 

    moveImage();
   }  
 } 
}

void main()
{  
 image=imread("im.jpg");
 //int win_width=1400,win_height=700;     //固定窗口的大小1400 x 700
 //rect_win=Rect(0,0,win_width,win_height);   //窗口顯示矩形區
 rect_img=Rect(0,0,win_width,win_height);   //窗口圖像對應的矩形區
 //win_image.create(win_height,win_width,image.type());
 //Mat tmp=image(rect_win);  // 窗口圖像對應于源圖像中的區域
 //tmp.convertTo(win_image,tmp.type());  //復制一個圖像的ROI到另外一個圖像的指定區域
 Mat win_image=image(rect_img);
 namedWindow("拼接結果", 1);
 imshow("拼接結果",win_image);

 setMouseCallback("拼接結果", on_mouse); 
 waitKey();
}