欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Linux下源碼包安裝Swoole及基本使用操作圖文詳解

 更新時間:2019年04月02日 10:22:35   作者:李維山  
這篇文章主要介紹了Linux下源碼包安裝Swoole及基本使用操作,結合圖文形式詳細分析了Linux環境下下載、安裝Swoole及基本使用相關操作技巧與注意事項,需要的朋友可以參考下

本文實例講述了Linux下源碼包安裝Swoole及基本使用操作。分享給大家供大家參考,具體如下:

下載Swoole PECL擴展源碼包:http://pecl.php.net/package/swoole

關于PHP版本依賴選擇:

下載好放到/usr/local/src下,解壓縮:

tar -zxvf swoole-2.2.0.tgz

準備擴展安裝編譯環境:

phpize

查看php-config位置:

find / -name php-config

配置:(--with-php-config==后面是你自己的php-config位置)

./configure --with-php-config=/www/server/php/72/bin/php-config

編譯安裝:

make && make install

在php.ini里面加一行 :

extension = swoole.so

使用 php -m 命令查看swoole擴展已經安裝成功:

查看phpinfo信息:


(測試前說明:以下使用的端口,要確認服務器放行,寶塔環境還需要添加安全組規則)

【創建TCP服務器】

創建server.php:

<?php
  //創建Server對象,監聽 127.0.0.1:9501端口
  $serv = new swoole_server("127.0.0.1", 9501); 
 
  //監聽連接進入事件
  $serv->on('connect', function ($serv, $fd) { 
    echo "Client: Connect.\n";
  });
 
  //監聽數據接收事件
  $serv->on('receive', function ($serv, $fd, $from_id, $data) {
    $serv->send($fd, "Server: ".$data);
  });
 
  //監聽連接關閉事件
  $serv->on('close', function ($serv, $fd) {
    echo "Client: Close.\n";
  });
 
  //啟動服務器
  $serv->start(); 

啟動TCP服務:

php server.php

查看9501端口已被監聽:

netstat -an | grep 9501

使用telnet連接TCP服務,輸入hello,服務器返回hello即測試成功:

telnet 127.0.0.1 9501

(如果telnet工具沒有安裝,執行yum install telnetyum install telnet-server

也可以寫一個TCP客戶端連接TCP服務器端:

創建tcp_client.php:

<?php
  //創建Client對象,監聽 127.0.0.1:9501端口
  $client = new swoole_client(SWOOLE_SOCK_TCP); 

  if(!$client->connect("127.0.0.1" ,9501)){
	echo "連接失敗";
	exit;
  }

  //向tcp服務器發送消息
  fwrite(STDOUT, "請輸入:");
  $msg = trim(fgets(STDIN));
  $client->send($msg);

  //接受tcp服務器消息
  $result = $client->recv();
  echo $result;

啟動tcp客戶端:

php tcp_client.php

測試結果: 


【創建UDP服務器】

創建udp_server.php:

<?php
  //創建Server對象,監聽 127.0.0.1:9502端口,類型為SWOOLE_SOCK_UDP
  $serv = new swoole_server("127.0.0.1", 9502, SWOOLE_PROCESS, SWOOLE_SOCK_UDP); 

  //監聽數據接收事件
  $serv->on('Packet', function ($serv, $data, $clientInfo) {
    $serv->sendto($clientInfo['address'], $clientInfo['port'], "Server ".$data);
    var_dump($clientInfo);
  });

  //啟動服務器
  $serv->start(); 

啟動UDP服務:

php udp_server.php

查看9502端口已被監聽:

netstat -an | grep 9502

使用netcat連接UDP服務,輸入hello,服務器返回hello即測試成功(CentOS):

nc -u 127.0.0.1 9502

 

(如果沒有安裝netcat監聽器,執行yum install -y nc


【創建Web服務器】

創建http_server.php:

<?php
  $http = new swoole_http_server("0.0.0.0", 9501);
  
  //配置靜態文件根目錄(可選)
  $http->set([
    'document_root' => '/www/wwwroot/lwsblog',
    'enable_static_handler' => true,
  ]);

  $http->on('request', function ($request, $response) {
    var_dump($request->get, $request->post);
    
    //設置header
    $response->header("Content-Type", "text/html; charset=utf-8");

    //設置cookie
    $response->cookie("name", "lws", time()+3600);

    //發送Http響應體,并結束請求處理。
    $response->end("<h1>Hello Swoole. #".rand(1000, 9999)."</h1>");
  });

  $http->start();

啟動服務:

php http_server.php

(如果9501端口已經被占用查看進程PID,殺死進程:)

lsof -i:9501

kill 9013

瀏覽器訪問主機地址:端口號,得到程序預期結果即測試成功:


【創建WebSocket服務器】

創建ws_server.php:

<?php
  //創建websocket服務器對象,監聽0.0.0.0:9501端口
  $ws = new swoole_websocket_server("0.0.0.0", 9501);
  
  //配置靜態文件根目錄(可選)
  $ws ->set([
    'document_root' => '/www/wwwroot/lwsblog',
    'enable_static_handler' => true,
  ]);

  //監聽WebSocket連接打開事件
  $ws->on('open', function ($ws, $request) {
    var_dump($request->fd, $request->get, $request->server);
    $ws->push($request->fd, "hello, welcome\n");
  });

  //監聽WebSocket消息事件
  $ws->on('message', function ($ws, $frame) {
    echo "Message: {$frame->data}\n";
    $ws->push($frame->fd, "server: {$frame->data}");
  });

  //監聽WebSocket連接關閉事件
  $ws->on('close', function ($ws, $fd) {
    echo "client-{$fd} is closed\n";
  });

  $ws->start();

運行程序:(這里還是要確認監聽的端口沒有被占用,如果被占用查看進程PID,殺死進程)

php ws_server.php

前端頁面js監聽:(127.0.0.1改成你的主機地址)

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>WebSocket</title>
</head>
<body>
</body>

<script type="text/javascript">
var wsServer = 'ws://127.0.0.1:9501';
var websocket = new WebSocket(wsServer);
websocket.onopen = function (evt) {
  console.log("Connected to WebSocket server.");
};

websocket.onclose = function (evt) {
  console.log("Disconnected");
};

websocket.onmessage = function (evt) {
  console.log('Retrieved data from server: ' + evt.data);
};

websocket.onerror = function (evt, e) {
  console.log('Error occured: ' + evt.data);
};
</script>
</html>

使用谷歌瀏覽器訪問前端頁面:

服務器端收到請求信息:

更多關于PHP相關內容感興趣的讀者可查看本站專題:《PHP擴展開發教程》、《php面向?qū)ο蟪绦蛟O(shè)計入門教程》、《PHP數學運算技巧總結》、《PHP數組(Array)操作技巧大全》、《PHP數據結構與算法教程》、《php程序設計算法總結》、《php正則表達式用法總結》及《php常見數據庫操作技巧匯總

希望本文所述對大家PHP程序設計有所幫助。

相關文章

最新評論