欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

詳解php+nginx 服務發生500 502錯誤排查思路

 更新時間：2019年07月19日 11:39:28   作者：小小的太陽  
這篇文章主要介紹了詳解php+nginx 服務發生500 502錯誤排查思路，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

概述

當線上的服務中訪問中出現500或者502錯誤時，需要緊急處理，排查問題，該怎么做？可以通過分析一些錯誤日志或者跟蹤php-fpm進程來進行問題定位。

nginx error_log

nginx的error_log在nginx的配置文件中定義的

server {
 listen  80;
 server_name localhost;
 root   /var/www;

 access_log /Users/jiao/logs/default.access.log;
 error_log /Users/jiao/logs/default.error.log;
 location / {
  index index.html index.htm index.php;
  autoindex on;
 }
 location = /info {
  allow 127.0.0.1;
  deny all;
  rewrite (.*) /.info.php;
 }
 location ~ \.php$ {
  root /var/www;
  fastcgi_pass 127.0.0.1:9000;
  fastcgi_index index.php;
  fastcgi_param SCRIPT_FILENAME /var/www$fastcgi_script_name;
  include /usr/local/etc/nginx/fastcgi_params;
 }
}

查看error_log

➜  tail /Users/jiao/logs/default.error.log
2019/07/17 11:08:18 [error] 77416#0: *76 kevent() reported about an closed connection (54: Connection reset by peer) while reading response header from upstream, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "localhost"

發現出現了Connection reset by peer，連接被重置了，此時可以再查看php-fpm的error_log進一步分析問題

php-fpm error_log

php-fpm的error_log在php-fpm.conf文件中配置中定義的

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /usr/local/var
; Default Value: log/php-fpm.log
error_log = log/php-fpm.log

error_log里面的內容是這樣的

➜ tail /usr/local/var/log/php-fpm.log
[17-Jul-2019 10:49:54] NOTICE: [pool www] child 81948 started
[17-Jul-2019 11:08:18] WARNING: [pool www] child 77537, script '/var/www/index.php' (request: "GET /index.php") execution timed out (3.801267 sec), terminating
[17-Jul-2019 11:08:18] WARNING: [pool www] child 77537 exited on signal 15 (SIGTERM) after 1503.113967 seconds from start
[17-Jul-2019 11:08:18] NOTICE: [pool www] child 94339 started

可以看到是請求/var/www/index.php文件出現了超時

dtruss

dtruss是動態跟蹤命令，可以根據PID，name跟蹤進程

mac環境下使用dtruss，linux環境可以使用strace，pstack

➜ dtruss 
USAGE: dtruss [-acdefholLs] [-t syscall] { -p PID | -n name | command | -W name }
  -p PID   # examine this PID
  -n name   # examine this process name
  -t syscall  # examine this syscall only
  -W name   # wait for a process matching this name
  -a    # print all details
  -c    # print syscall counts
  -d    # print relative times (us)
  -e    # print elapsed times (us)
  -f    # follow children
  -l    # force printing pid/lwpid
  -o    # print on cpu times
  -s    # print stack backtraces
  -L    # don't print pid/lwpid
  -b bufsize  # dynamic variable buf size

eg,

 dtruss df -h  # run and examine "df -h"
 dtruss -p 1871  # examine PID 1871
 dtruss -n tar  # examine all processes called "tar"
 dtruss -f test.sh # run test.sh and follow children

跟蹤php-fpm：sudo dtruss -a -n php-fpm

此時訪問web頁面，就可以看到跟蹤內容

21416/0x3479b6:  1559  63  3 getrusage(0x0, 0x7FFEE1EC0760, 0x0)   = 0 0
21416/0x3479b6:  1561  4  0 getrusage(0xFFFFFFFFFFFFFFFF, 0x7FFEE1EC0760, 0x0)   = 0 0
21416/0x3479b6:  1627  77  17 poll(0x7FFEE1EC08C0, 0x1, 0x1388)   = 1 0
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
21416/0x3479b6:  1872  29  24 lstat64("/var/www/index.php\0", 0x7FFEE1ECFF38, 0x0)   = 0 0
21416/0x3479b6:  1884  9  6 lstat64("/var/www\0", 0x7FFEE1ECFDF8, 0x0)   = 0 0
21416/0x3479b6:  1889  6  3 lstat64("/var\0", 0x7FFEE1ECFCB8, 0x0)   = 0 0
21416/0x3479b6:  1899  12  8 readlink("/var\0", 0x7FFEE1ED0090, 0x400)   = 11 0
21416/0x3479b6:  1905  6  4 lstat64("/private/var\0", 0x7FFEE1ECFB78, 0x0)   = 0 0
21416/0x3479b6:  1917  6  3 lstat64("/private\0", 0x7FFEE1ECFA38, 0x0)   = 0 0
21416/0x3479b6:  2178  18  14 stat64("/var/www/.user.ini\0", 0x7FFEE1ED0240, 0x0)   = -1 Err#2
21416/0x3479b6:  2217  5  1 setitimer(0x2, 0x7FFEE1ED07E0, 0x0)   = 0 0
21416/0x3479b6:  2225  4  0 sigaction(0x1B, 0x7FFEE1ED0788, 0x7FFEE1ED07B0)   = 0 0
21416/0x3479b6:  2237  5  1 sigprocmask(0x2, 0x7FFEE1ED0804, 0x0)   = 0x0 0
21416/0x3479b6:  3643  48  40 open_nocancel(".\0", 0x0, 0x1)   = 5 0
21416/0x3479b6:  3648  7  3 fstat64(0x5, 0x7FFEE1ED0110, 0x0)   = 0 0
21416/0x3479b6:  3653  7  2 fcntl_nocancel(0x5, 0x32, 0x10F252158)   = 0 0
21416/0x3479b6:  3661  12  7 close_nocancel(0x5)   = 0 0
21416/0x3479b6:  3670  10  7 stat64("/usr/local/var\0", 0x7FFEE1ED0080, 0x0)   = 0 0
21416/0x3479b6:  3681  11  8 chdir("/var/www\0", 0x0, 0x0)   = 0 0
21416/0x3479b6:  3698  4  0 setitimer(0x2, 0x7FFEE1ED02D0, 0x0)   = 0 0
21416/0x3479b6:  3710  6  3 fcntl(0x3, 0x8, 0x10F3FD858)   = 0 0
21416/0x3479b6:  3733  9  6 stat64("/private/var/www/index.php\0", 0x7FFEE1ECFF10, 0x0)   = 0 0
74904/0x332630: 723125 1073381  19 kevent(0x9, 0x0, 0x0)   = 0 0
74902/0x332629: 770666 1073387  17 kevent(0x8, 0x0, 0x0)   = 0 0
74904/0x332630: 723165 1061954  20 kevent(0x9, 0x0, 0x0)   = 0 0
74902/0x332629: 770709 1061954  20 kevent(0x8, 0x0, 0x0)   = 0 0
74904/0x332630: 723201 1074786  16 kevent(0x9, 0x0, 0x0)   = 0 0
74902/0x332629: 770747 1074783  16 kevent(0x8, 0x0, 0x0)   = 0 0
74904/0x332630: 723229 1069141  13 kevent(0x9, 0x0, 0x0)   = 0 0
74902/0x332629: 770777 1069145  11 kevent(0x8, 0x0, 0x0)   = 0 0
21416/0x3479b6:  3942 3902233  7 __semwait_signal(0x703, 0x0, 0x1)   = -1 Err#4
74902/0x332629: 770814  103  25 kill(21416, 15)   = 0 0
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 771325  7  2 sigreturn(0x7FFEE1ECFC40, 0x1E, 0xC1A4B78E0404663A)   = 0 Err#-2
74902/0x332629: 771336  7  3 kevent(0x8, 0x0, 0x0)   = 1 0
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 771352  11  7 wait4(0xFFFFFFFFFFFFFFFF, 0x7FFEE1ED0748, 0x3)   = 21416 0
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 773511 1957 1899 fork()   = 28060 0
28060/0x3754c5:  125:  0:  0 fork()   = 0 0
28060/0x3754c5:  128  9  2 bsdthread_register(0x7FFF6774C418, 0x7FFF6774C408, 0x2000)   = -1 Err#22
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 773737  4  1 wait4(0xFFFFFFFFFFFFFFFF, 0x7FFEE1ED0748, 0x3)   = 0 0
74902/0x332629: 773742  6  3 read(0x5, "\0", 0x1)   = -1 Err#35
28060/0x3754c5:  320  4  0 getpid(0x0, 0x0, 0x0)   = 28060 0
28060/0x3754c5:  328  7  2 __mac_syscall(0x7FFF67758A17, 0x4, 0x7FFEE1ED0208)   = -1 Err#45
28060/0x3754c5:  332  5  2 csops(0x6D9C, 0xB, 0x7FFEE1ED0248)   = -1 Err#22
28060/0x3754c5:  755  14  11 dup2(0x1, 0x2, 0x0)   = 2 0
28060/0x3754c5:  797  89  22 close(0x4)   = 0 0
28060/0x3754c5:  806  11  6 dup2(0x7, 0x0, 0x0)   = 0 0
28060/0x3754c5:  817  4  0 geteuid(0x0, 0x0, 0x0)   = 501 0
28060/0x3754c5:  820  3  0 close(0x5)   = 0 0
28060/0x3754c5:  821  3  0 close(0x6)   = 0 0
28060/0x3754c5:  824  5  1 sigaction(0xF, 0x7FFEE1ED0688, 0x0)   = 0 0
28060/0x3754c5:  825  3  0 sigaction(0x2, 0x7FFEE1ED0688, 0x0)   = 0 0
28060/0x3754c5:  827  3  0 sigaction(0x1E, 0x7FFEE1ED0688, 0x0)   = 0 0
28060/0x3754c5:  828  3  0 sigaction(0x1F, 0x7FFEE1ED0688, 0x0)   = 0 0
28060/0x3754c5:  829  3  0 sigaction(0x14, 0x7FFEE1ED0688, 0x0)   = 0 0
28060/0x3754c5:  830  3  0 sigaction(0x3, 0x7FFEE1ED0688, 0x0)   = 0 0
28060/0x3754c5:  1043  3  0 close(0x7)   = 0 0

可以看到系統底層執行的函數，如lstat64獲取文件內容信息，kill(21416, 15)kill掉php-fpm進程，fork()出新的php-fpm進程，有興趣可以深入研究每個指令的作用

參考

http://www.dbjr.com.cn/article/165773.htm

以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

相關文章

  • Mac下Nginx安裝環境配置詳解

    Mac下Nginx安裝環境配置詳解

    本篇文章主要介紹了Mac下Nginx環境配置詳解，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
    2017-02-02
  • nginx啟動服務提示98: Address already in use錯誤的解決

    nginx啟動服務提示98: Address already in use錯誤的解決

    這篇文章主要給大家介紹了nginx啟動服務提示98: Address already in use錯誤的解決方法，文中介紹的非常詳細，對大家具有一定的參考學習價值，需要的朋友們下面來一起看看吧。
    2017-05-05
  • Nginx如何封禁IP和IP段的實現

    Nginx如何封禁IP和IP段的實現

    這篇文章主要介紹了Nginx如何封禁IP和IP段的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
    2020-07-07
  • linux下nginx負載均衡搭建的方法步驟

    linux下nginx負載均衡搭建的方法步驟

    本篇文章主要介紹了linux下nginx負載均衡搭建的方法步驟，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
    2018-04-04
  • 配置Nginx服務器防止Flood攻擊的方法

    配置Nginx服務器防止Flood攻擊的方法

    這篇文章主要介紹了配置Nginx服務器防止Flood攻擊的方法,包括PHP的應用請求限制等降低負載的措施,需要的朋友可以參考下
    2015-06-06
  • nginx修改配置文件不生效解決方案

    nginx修改配置文件不生效解決方案

    當你修改了Nginx的配置文件后,需要重新加載配置文件,使得修改生效,這篇文章主要給大家介紹了關于nginx修改配置文件不生效的解決方案,需要的朋友可以參考下
    2023-08-08
  • Nginx報403 forbidden錯誤 (13: Permission denied)的解決辦法

    Nginx報403 forbidden錯誤 (13: Permission denied)的解決辦法

    這篇文章主要介紹了Nginx報403 forbidden錯誤 (13: Permission denied)的解決辦法,引起nginx 403 forbidden通常是三種情況：一是缺少索引文件，二是權限問題，三是SELinux狀態。具體內容詳情大家可以參考下本文
    2017-01-01
  • nginx的服務配置及重定向問題

    nginx的服務配置及重定向問題

    這篇文章主要介紹了nginx的服務配置及重定向問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
    2024-06-06
  • Windows中將Nginx添加為服務的問題

    Windows中將Nginx添加為服務的問題

    這篇文章主要介紹了Windows中將Nginx添加為服務的問題,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下
    2022-02-02
  • Nginx+Tomcat負載均衡集群安裝配置案例詳解

    Nginx+Tomcat負載均衡集群安裝配置案例詳解

    Nginx是一款非常優秀的http服務器軟件，它能夠支持高達50000個并發連接數的相應，Nginx+Tomcat負載均衡集案列是應用于生產環境的一套可靠的Web站點解決方案，對Nginx Tomcat負載均衡集群相關知識感興趣的朋友一起看看吧
    2021-10-10

最新評論