詳解Docker無法正常啟動的原因及解決辦法
一、Docker啟動異常表現:
1.狀態反復restaring,用命令查看
$docker ps -a CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 21c09be88c11 docker.xxxx.cn:5000/xxx-tes/xxx_tes:1.0.6 "/usr/local/tomcat..." 9 days ago Restarting (1) Less than a second ago xxx10
2.Docker日志有明顯問題:
$docker logs [容器名/容器ID]
二、Docker啟動異常的可能原因:
2.1.內存不夠
Docker 啟動至少需要2G內存,首先執行free -mh命令查看剩余內存是否足夠
直接查看內存
$free -mh total used free shared buff/cache available Mem: 15G 14G 627M 195M 636M 726M Swap: 0B 0B 0B
分析日志
有時候一瞬間內存過載溢出,導致部分進程被殺死,看起來內存也是夠用的,事實上docker還是會反復重啟,就需要通過docker日志和系統日志信的息來進一步分析:
分析docker日志
查看docker日志看到內存溢出的信息,要仔細翻閱才能找到信息,并不是在最下面
$docker logs [容器名/容器ID]|less Java HotSpot(TM) 64-Bit Server VM warning: INFO: os::commit_memory(0x0000000769990000, 1449590784, 0) failed; error='Cannot allocate memory' (errno=12) # # There is insufficient memory for the Java Runtime Environment to continue. # Native memory allocation (malloc) failed to allocate 1449590784 bytes for committing reserved memory. # An error report file with more information is saved as: # //hs_err_pid1.log Java HotSpot(TM) 64-Bit Server VM warning: INFO: os::commit_memory(0x0000000769990000, 1449590784, 0) failed; error='Cannot allocate memory' (errno=12) # # There is insufficient memory for the Java Runtime Environment to continue. # Native memory allocation (malloc) failed to allocate 1449590784 bytes for committing reserved memory. # An error report file with more information is saved as: # /tmp/hs_err_pid1.log Java HotSpot(TM) 64-Bit Server VM warning: INFO: os::commit_memory(0x0000000769990000, 1449590784, 0) failed; error='Cannot allocate memory' (errno=12) # # There is insufficient memory for the Java Runtime Environment to continue. # Native memory allocation (malloc) failed to allocate 1449590784 bytes for committing reserved memory. # Can not save log file, dump to screen.. # # There is insufficient memory for the Java Runtime Environment to continue. # Native memory allocation (malloc) failed to allocate 1449590784 bytes for committing reserved memory. # Possible reasons: # The system is out of physical RAM or swap space # In 32 bit mode, the process size limit was hit # Possible solutions: # Reduce memory load on the system # Increase physical memory or swap space # Check if swap backing store is full # Use 64 bit Java on a 64 bit OS # Decrease Java heap size (-Xmx/-Xms) # Decrease number of Java threads # Decrease Java thread stack sizes (-Xss) # Set larger code cache with -XX:ReservedCodeCacheSize= # This output file may be truncated or incomplete. # # Out of Memory Error (os_linux.cpp:2756), pid=1, tid=140325689620224 # # JRE version: (7.0_79-b15) (build ) # Java VM: Java HotSpot(TM) 64-Bit Server VM (24.79-b02 mixed mode linux-amd64 compressed oops) # Core dump written. Default location: //core or core.1 #
分析系統日志
查看系統日志,發現有大量由于內存溢出,進程被殺死的記錄
$grep -i 'Out of Memory' /var/log/messages Apr 7 10:04:02 centos106 kernel: Out of memory: Kill process 1192 (java) score 54 or sacrifice child Apr 7 10:08:00 centos106 kernel: Out of memory: Kill process 2301 (java) score 54 or sacrifice child Apr 7 10:09:59 centos106 kernel: Out of memory: Kill process 28145 (java) score 52 or sacrifice child Apr 7 10:20:40 centos106 kernel: Out of memory: Kill process 2976 (java) score 54 or sacrifice child Apr 7 10:21:08 centos106 kernel: Out of memory: Kill process 3577 (java) score 47 or sacrifice child Apr 7 10:21:08 centos106 kernel: Out of memory: Kill process 3631 (java) score 47 or sacrifice child Apr 7 10:21:08 centos106 kernel: Out of memory: Kill process 3634 (java) score 47 or sacrifice child Apr 7 10:21:08 centos106 kernel: Out of memory: Kill process 3640 (java) score 47 or sacrifice child Apr 7 10:21:08 centos106 kernel: Out of memory: Kill process 3654 (java) score 47 or sacrifice child Apr 7 10:27:27 centos106 kernel: Out of memory: Kill process 6998 (java) score 51 or sacrifice child Apr 7 10:27:28 centos106 kernel: Out of memory: Kill process 7027 (java) score 52 or sacrifice child Apr 7 10:28:10 centos106 kernel: Out of memory: Kill process 7571 (java) score 42 or sacrifice child Apr 7 10:28:10 centos106 kernel: Out of memory: Kill process 7586 (java) score 42 or sacrifice child
2.2.端口沖突
該docker監聽端口已經被其他進程占用,一般此種問題容易出現在新部署的服務,或在原有機器上部署新的后臺服務,所以在部署之前應該執行命令檢查端口是否已經被占用,如果上線后發現占有則應改為可用端口再重啟之。
檢查命令: $netstat -nltp|grep [規劃的端口號]
三、對策
3.1.內存不夠的對策:
對策1:
3.1.1 saltstack的minion在運行過久之后,可能占用大量內存,需要將其重啟。重啟命令可能有時并不起作用。主要檢查運行狀態,如果未成功停止,則重新重啟;
對策2:
3.2.2 ELK日志收集程序或者其他java進程占用過高,用top和ps命令排查,謹慎確定進程的作用,在確保不影響業務的情況下,停止相關進程;
對策3:
釋放被占用的內存(buff/cache):
$sync #將內存數據寫入磁盤
$echo 3 > /proc/sys/vm/drop_caches #釋放被占用的內存
對策4:
有時候并不是buff/cache過高導致內存不夠用,確實是被很多必要的進程消耗掉了內存,那就需要從機器資源分配使用的層面去考慮和解決了。
3.2 端口沖突的對策
對策1:
一般此種問題容易出現在新部署的服務,或在原有機器上部署新的后臺服務,所以在部署之前應該執行命令檢查端口是否已經被占用,如果上線后發現占有則應改為可用端口再重啟之。
檢查命令: $netstat -nltp|grep [規劃的端口號]
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
Dockerfile中multi-stage(多階段構建)詳解
在2017年5月3日即將發行的 Docker 17.05.0-ce 中,Docker 官方提供了簡便的多階段構建 (multi-stage build) 方案,下面這篇文章主要給大家介紹了關于Dockerfile中multi-stage(多階段構建)的相關資料,需要的朋友可以參考借鑒,下面隨著小編來一起學習學習吧。2018-03-03docker安裝prometheus和grafana的詳細過程
prometheus通過各種Exporter采集到監控數據,然后存儲進prometheus中,以供查詢展示,這篇文章主要介紹了docker安裝prometheus和grafana,需要的朋友可以參考下2023-02-02Docker搭建簡單的應用棧與容器Hello World訪問詳解
這篇文章主要介紹了Docker搭建簡單的應用棧與容器Hello World訪問,結合實例形式詳細分析了Docker應用容器棧的獲取、互聯、啟動、配置以及應用訪問測試相關操作技巧,需要的朋友可以參考下2018-06-06在 docker 之間導出導入鏡像的方法
本篇文章主要介紹了在 docker 之間導出導入鏡像的方法,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2017-07-07docker 安裝 php-fpm 服務 / 擴展 / 配置的示例教程詳解
這篇文章主要介紹了docker 安裝 php-fpm 服務 / 擴展 / 配置,本文通過實例代碼給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-05-05Docker 手動配置容器網絡實例詳解
這篇文章主要介紹了Docker 手動配置容器網絡實例詳解的相關資料,這里有具體實現,需要的朋友可以參考下2016-11-11