快捷導航

mysql累積聚合原理與用法實例分析

更新時間：2019年12月27日 11:01:46 作者：雪山飛豬

這篇文章主要介紹了mysql累積聚合原理與用法,結合實例形式分析了mysql累積聚合原理、用法及相關操作注意事項,需要的朋友可以參考下

本文實例講述了mysql累積聚合原理與用法。分享給大家供大家參考，具體如下：

累積聚合為聚合從序列內第一個元素到當前元素的數據，如為每個員工返回每月開始到現在累積的訂單數量和平均訂單數量

行號問題有兩個解決方案，分別是為使用子查詢和使用連接。子查詢的方法通常比較直觀，可讀性強。但是在要求進行聚合時，子查詢需要為每個聚合掃描一次數據，而連接方法通常只需要掃描一次就可以得到結果。下面的查詢使用連接來得到結果

SELECT
 a.empid,
 a.ordermonth,a.qty AS thismonth,
 SUM(b.qty) AS total,
 CAST(AVG(b.qty) AS DECIMAL(5,2)) AS avg
FROM emporders a
INNER JOIN emporders b
  ON a.empid=b.empid
  AND b.ordermonth <= a.ordermonth
GROUP BY a.empid,a.ordermonth,a.qty
ORDER BY a.empid,a.ordermonth

如果只是查詢2015年的累積訂單，可以加上以where條件

WHERE DATE_FORMAT(a.ordermonth,'%Y')='2015' AND DATE_FORMAT(b.ordermonth,'%Y')='2015'

運行結果如下

此外可能還需要篩選數據，例如只需要返回每個員工到達某一目標之前每月訂單的情況。這里假設統計每個員工的合計訂單數量達到1000之前的累積情況。

這里可以使用HAVING過濾器來完成查詢

SELECT
 a.empid,
 a.ordermonth,a.qty AS thismonth,
 SUM(b.qty) AS total,
 CAST(AVG(b.qty) AS DECIMAL(5,2)) AS avg
FROM emporders a
INNER JOIN emporders b
  ON a.empid=b.empid
  AND b.ordermonth <= a.ordermonth
WHERE DATE_FORMAT(a.ordermonth,'%Y')='2015' AND DATE_FORMAT(b.ordermonth,'%Y')='2015'
GROUP BY a.empid,a.ordermonth,a.qty
HAVING total<1000
ORDER BY a.empid,a.ordermonth

這里并沒有統計到達到1000時該月的情況，如果要進行統計，則情況又有點復雜。如果指定了total <= 1000，則只有該月訂單數量正好為1000才進行統計，否則不會對該月進行統計。因此這個問題的過濾，可以從另外一個方面來考慮。當累積累積訂單小于1000時，累積訂單與上個月的訂單之差是小于1000的，同時也能對第一個訂單數量超過1000的月份進行統計。故該解決方案的SQL語句如下

SELECT
 a.empid,
 a.ordermonth,a.qty AS thismonth,
 SUM(b.qty) AS total,
 CAST(AVG(b.qty) AS DECIMAL(5,2)) AS avg
FROM emporders a
INNER JOIN emporders b
  ON a.empid=b.empid
  AND b.ordermonth <= a.ordermonth
WHERE DATE_FORMAT(a.ordermonth,'%Y')='2015' AND DATE_FORMAT(b.ordermonth,'%Y')='2015'
GROUP BY a.empid,a.ordermonth,a.qty
HAVING total-a.qty < 1000
ORDER BY a.empid,a.ordermonth

運行結果如下

如果只想返回達到累積訂單數為1000的當月數據，不返回之前的月份，則可以對上述SQL語句

進一步過濾，再添加累積訂單數量大于等于1000的條件。該問題的SQL語句如下，

SELECT
 a.empid,
 a.ordermonth,a.qty AS thismonth,
 SUM(b.qty) AS total,
 CAST(AVG(b.qty) AS DECIMAL(5,2)) AS avg
FROM emporders a
INNER JOIN emporders b
  ON a.empid=b.empid
  AND b.ordermonth <= a.ordermonth
WHERE DATE_FORMAT(a.ordermonth,'%Y')='2015' AND DATE_FORMAT(b.ordermonth,'%Y')='2015'
GROUP BY a.empid,a.ordermonth,a.qty
HAVING total-a.qty < 1000 AND total >= 1000
ORDER BY a.empid,a.ordermonth

運行結果如下