Redis概述及l(fā)inux安裝redis的詳細教程
1.Redis是什么
- 性能極高,Redis能讀的速度是110000次/s,寫的速度是81000次/s 。
- Redis支持數據的持久化,可以將內存中的數據保持在磁盤中,重啟的時候可以再次加載進行使用。
- Redis不僅僅支持簡單的key-value類型的數據,同時還提供list,set,zset,hash等數據結構的存儲。
- Redis支持數據的備份,即master-slave模式的數據備份。
2.Redis特點
- 性能極高,Redis能讀的速度是110000次/s,寫的速度是81000次/s 。
- Redis支持數據的持久化,可以將內存中的數據保持在磁盤中,重啟的時候可以再次加載進行使用。
- Redis不僅僅支持簡單的key-value類型的數據,同時還提供list,set,zset,hash等數據結構的存儲。
- Redis支持數據的備份,即master-slave模式的數據備份。
3.Redis能做什么
- 內存存儲和持久化:redis支持異步將內存中的數據寫到硬盤上,同時不影響繼續服務。
- 取最新N個數據的操作,如:可以將最新的10條評論的ID放在Redis的List集合里面。
- 模擬類似于HttpSession這種需要設定過期時間的功能。
- 發布、訂閱消息系統
4.安裝redis
中文官方網站:Http://www.redis.cn/
企業里面做Redis開發,99%都是Linux版的運用和安裝。
第一步 下載redis
wget http://download.redis.io/releases/redis-4.0.6.tar.gz
第二步 解壓壓縮包
tar -zxvf redis-4.0.6.tar.gz
[root@iZwz991stxdwj560bfmadtZ local]# tar -zxvf redis-4.0.6.tar.gz
第三步 yum安裝gcc依賴
yum install gcc
[root@iZwz991stxdwj560bfmadtZ local]# yum install gcc
遇到選擇,輸入y即可
第四步 跳轉到redis解壓目錄下
cd redis-4.0.6
[root@iZwz991stxdwj560bfmadtZ local]# cd redis-4.0.6
第五步 編譯安裝
make MALLOC=libc
[root@iZwz991stxdwj560bfmadtZ redis-4.0.6]# make MALLOC=libc
將/usr/local/redis-4.0.6/src目錄下的文件加到/usr/local/bin目錄
cd src && make install
[root@iZwz991stxdwj560bfmadtZ redis-4.0.6]# cd src && make install CC Makefile.dep Hint: It's a good idea to run 'make test' ;) INSTALL install INSTALL install INSTALL install INSTALL install INSTALL install
5.啟動redis
方式一 直接啟動redis
./redis-server
[root@iZwz991stxdwj560bfmadtZ src]# ./redis-server 18685:C 13 Dec 12:56:12.507 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo 18685:C 13 Dec 12:56:12.507 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=18685, just started 18685:C 13 Dec 12:56:12.507 # Warning: no config file specified, using the default config. In order to specify a config file use ./redis-server /path/to/redis.conf _._ _.-``__ ''-._ _.-`` `. `_. ''-._ Redis 4.0.6 (00000000/0) 64 bit .-`` .-```. ```\/ _.,_ ''-._ ( ' , .-` | `, ) Running in standalone mode |`-._`-...-` __...-.``-._|'` _.-'| Port: 6379 | `-._ `._ / _.-' | PID: 18685 `-._ `-._ `-./ _.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | http://redis.io `-._ `-._`-.__.-'_.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | `-._ `-._`-.__.-'_.-' _.-' `-._ `-.__.-' _.-' `-._ _.-' `-.__.-' 18685:M 13 Dec 12:56:12.508 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128. 18685:M 13 Dec 12:56:12.508 # Server initialized 18685:M 13 Dec 12:56:12.508 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect. 18685:M 13 Dec 12:56:12.508 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled. 18685:M 13 Dec 12:56:12.508 * Ready to accept connections
如上圖:redis啟動成功,但是這種啟動方式需要一直打開窗口,不能進行其他操作,不太方便。
按 ctrl + c可以關閉窗口。
方式二 以后臺進程方式啟動redis
第一步:修改redis.conf文件
將
daemonize no
修改為
daemonize yes
第二步:指定redis.conf文件啟動
redis-server /usr/local/redis-4.0.6/redis.conf
ps -aux | grep redis查看redis進程
這樣redis就在linux上安裝成功了
6. redis的helloworld
到此這篇關于Redis概述及l(fā)inux安裝redis的詳細教程的文章就介紹到這了,更多相關linux安裝redis內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
Redis數據遷移RedisShake的實現方法
本文主要介紹了Redis數據遷移RedisShake的實現方法,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2022-04-04Redis?異常?read?error?on?connection?的解決方案
這篇文章主要介紹了Redis異常read?error?on?connection的解決方案,文章圍繞主題展開詳細的內容介紹,具有一定的參考價值,感興趣的小伙伴可以參考一下2022-08-08