Java Map.entry案例詳解
Map.entrySet() 這個方法返回的是一個Set<Map.Entry<K,V>>,Map.Entry 是Map中的一個接口,他的用途是表示一個映射項(里面有Key和Value),而Set<Map.Entry<K,V>>表示一個映射項的Set。Map.Entry里有相應的getKey和getValue方法,即JavaBean,讓我們能夠從一個項中取出Key和Value。
下面是遍歷Map的四種方法:
public static void main(String[] args) {
Map<String, String> map = new HashMap<String, String>();
map.put("1", "value1");
map.put("2", "value2");
map.put("3", "value3");
//第一種:普遍使用,二次取值
System.out.println("通過Map.keySet遍歷key和value:");
for (String key : map.keySet()) {
System.out.println("key= "+ key + " and value= " + map.get(key));
}
//第二種
System.out.println("通過Map.entrySet使用iterator遍歷key和value:");
Iterator<Map.Entry<String, String>> it = map.entrySet().iterator();
while (it.hasNext()) {
Map.Entry<String, String> entry = it.next();
System.out.println("key= " + entry.getKey() + " and value= " + entry.getValue());
}
//第三種:推薦,尤其是容量大時
System.out.println("通過Map.entrySet遍歷key和value");
for (Map.Entry<String, String> entry : map.entrySet()) {
System.out.println("key= " + entry.getKey() + " and value= " + entry.getValue());
}
//第四種
System.out.println("通過Map.values()遍歷所有的value,但不能遍歷key");
for (String v : map.values()) {
System.out.println("value= " + v);
}
}
下面是HashMap的源代碼:
首先HashMap的底層實現用的時候一個Entry數組
/**
* The table, resized as necessary. Length MUST Always be a power of two.
*/
transient Entry[] table; //聲明了一個數組
........
public HashMap() {
this.loadFactor = DEFAULT_LOAD_FACTOR;
threshold = (int)(DEFAULT_INITIAL_CAPACITY * DEFAULT_LOAD_FACTOR);
table = new Entry[DEFAULT_INITIAL_CAPACITY];//初始化數組的大小為DEFAULT_INITIAL_CAPACITY(這里是16)
init();
}
再來看一下Entry是在什么地方定義的,繼續上源碼,我們?cè)贖ashMap的源碼的674行發現了它的定義,原來他是HashMap的一個內部類,并且實現了Map.Entry接口,以下有些地方是轉載
static class Entry<K,V> implements Map.Entry<K,V> {
final K key;
V value;
Entry<K,V> next;
final int hash;
/**
* Creates new entry.
*/
Entry(int h, K k, V v, Entry<K,V> n) {
value = v;
next = n;
key = k;
hash = h;
}
public final K getKey() {
return key;
}
public final V getValue() {
return value;
}
public final V setValue(V newValue) {
V oldValue = value;
value = newValue;
return oldValue;
}
public final boolean equals(Object o) {
if (!(o instanceof Map.Entry))
return false;
Map.Entry e = (Map.Entry)o;
Object k1 = getKey();
Object k2 = e.getKey();
if (k1 == k2 || (k1 != null && k1.equals(k2))) {
Object v1 = getValue();
Object v2 = e.getValue();
if (v1 == v2 || (v1 != null && v1.equals(v2)))
return true;
}
return false;
}
public final int hashCode() {
return (key==null ? 0 : key.hashCode()) ^
(value==null ? 0 : value.hashCode());
}
public final String toString() {
return getKey() + "=" + getValue();
}
/**
* This method is invoked whenever the value in an entry is
* overwritten by an invocation of put(k,v) for a key k that's already
* in the HashMap.
*/
void recordAccess(HashMap<K,V> m) {
}
/**
* This method is invoked whenever the entry is
* removed from the table.
*/
void recordRemoval(HashMap<K,V> m) {
}
}
既然這樣那我們?cè)倏匆幌翸ap.Entry這個接口是怎么定義的,原來他是Map的一個內部接口并且定義了一些方法
interface Entry<K,V> {
/**
* Returns the key corresponding to this entry.
*
* @return the key corresponding to this entry
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
K getKey();
/**
* Returns the value corresponding to this entry. If the mapping
* has been removed from the backing map (by the iterator's
* <tt>remove</tt> operation), the results of this call are undefined.
*
* @return the value corresponding to this entry
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
V getValue();
/**
* Replaces the value corresponding to this entry with the specified
* value (optional operation). (Writes through to the map.) The
* behavior of this call is undefined if the mapping has already been
* removed from the map (by the iterator's <tt>remove</tt> operation).
*
* @param value new value to be stored in this entry
* @return old value corresponding to the entry
* @throws UnsupportedOperationException if the <tt>put</tt> operation
* is not supported by the backing map
* @throws ClassCastException if the class of the specified value
* prevents it from being stored in the backing map
* @throws NullPointerException if the backing map does not permit
* null values, and the specified value is null
* @throws IllegalArgumentException if some property of this value
* prevents it from being stored in the backing map
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
V setValue(V value);
/**
* Compares the specified object with this entry for equality.
* Returns <tt>true</tt> if the given object is also a map entry and
* the two entries represent the same mapping. More formally, two
* entries <tt>e1</tt> and <tt>e2</tt> represent the same mapping
* if<pre>
* (e1.getKey()==null ?
* e2.getKey()==null : e1.getKey().equals(e2.getKey())) &&
* (e1.getValue()==null ?
* e2.getValue()==null : e1.getValue().equals(e2.getValue()))
* </pre>
* This ensures that the <tt>equals</tt> method works properly across
* different implementations of the <tt>Map.Entry</tt> interface.
*
* @param o object to be compared for equality with this map entry
* @return <tt>true</tt> if the specified object is equal to this map
* entry
*/
boolean equals(Object o);
/**
* Returns the hash code value for this map entry. The hash code
* of a map entry <tt>e</tt> is defined to be: <pre>
* (e.getKey()==null ? 0 : e.getKey().hashCode()) ^
* (e.getValue()==null ? 0 : e.getValue().hashCode())
* </pre>
* This ensures that <tt>e1.equals(e2)</tt> implies that
* <tt>e1.hashCode()==e2.hashCode()</tt> for any two Entries
* <tt>e1</tt> and <tt>e2</tt>, as required by the general
* contract of <tt>Object.hashCode</tt>.
*
* @return the hash code value for this map entry
* @see Object#hashCode()
* @see Object#equals(Object)
* @see #equals(Object)
*/
int hashCode();
}
看到這里的時候大伙兒估計都明白得差不多了為什么HashMap為什么要選擇Entry數組來存放key-value對了吧,因?yàn)镋ntry實現的Map.Entry接口里面定義了getKey(),getValue(),setKey(),setValue()等方法相當于一個javaBean,對鍵值對進行了一個封裝便于后面的操作,從這里我們其實也可以聯想到不光是HashMap,譬如LinkedHashMap,TreeMap 等繼承自map的容器存儲key-value對都應該使用的是Entry只不過組織Entry的形式不一樣,HashMap用的是數組加鏈表的形式,LinkedHashMap用的是鏈表的形式,TreeMap應該使用的二叉樹的形式,不信的話上源碼
LinkedHashMap:
/**
* The head of the doubly linked list.
*/
/定義了鏈頭
private transient Entry<K,V> header;
初始化鏈表的方法:
void init() {
header = new Entry<K,V>(-1, null, null, null);
header.before = header.after = header;
}
TreeMap:
//定義根節點 private transient Entry<K,V> root = null;
再看他的put方法,是不是很面熟(二叉排序樹的插入操作)
public V put(K key, V value) {
Entry<K,V> t = root;
if (t == null) {
// TBD:
// 5045147: (coll) Adding null to an empty TreeSet should
// throw NullPointerException
//
// compare(key, key); // type check
root = new Entry<K,V>(key, value, null);
size = 1;
modCount++;
return null;
}
int cmp;
Entry<K,V> parent;
// split comparator and comparable paths
Comparator<? super K> cpr = comparator;
if (cpr != null) {
do {
parent = t;
cmp = cpr.compare(key, t.key);
if (cmp < 0)
t = t.left;
else if (cmp > 0)
t = t.right;
else
return t.setValue(value);
} while (t != null);
}
else {
if (key == null)
throw new NullPointerException();
Comparable<? super K> k = (Comparable<? super K>) key;
do {
parent = t;
cmp = k.compareTo(t.key);
if (cmp < 0)
t = t.left;
else if (cmp > 0)
t = t.right;
else
return t.setValue(value);
} while (t != null);
}
Entry<K,V> e = new Entry<K,V>(key, value, parent);
if (cmp < 0)
parent.left = e;
else
parent.right = e;
fixAfterInsertion(e);
size++;
modCount++;
return null;
}
ok,明白了各種Map的底層存儲key-value對的方式后,再來看看如何遍歷map吧,這里用HashMap來演示吧
Map提供了一些常用方法,如keySet()、entrySet()等方法,keySet()方法返回值是Map中key值的集合;entrySet()的返回值也是返回一個Set集合,此集合的類型為Map.Entry。
so,很容易寫出如下的遍歷代碼
1. Map map = new HashMap();
Irerator iterator = map.entrySet().iterator();
while(iterator.hasNext()) {
Map.Entry entry = iterator.next();
Object key = entry.getKey();
//
}
2.Map map = new HashMap();
Set keySet= map.keySet();
Irerator iterator = keySet.iterator;
while(iterator.hasNext()) {
Object key = iterator.next();
Object value = map.get(key);
//
}
另外,還有一種遍歷方法是,單純的遍歷value值,Map有一個values方法,返回的是value的Collection集合。通過遍歷collection也可以遍歷value,如
[java] view plain copy
Map map = new HashMap();
Collection c = map.values();
Iterator iterator = c.iterator();
while(iterator.hasNext()) {
Object value = iterator.next();
到此這篇關于Java Map.entry案例詳解的文章就介紹到這了,更多相關Java Map.entry內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
java web實現郵箱激活與忘記密碼
這篇文章主要為大家詳細介紹了java web實現郵箱激活與忘記密碼、重置密碼,具有一定的參考價值,感興趣的小伙伴們可以參考一下2019-02-02
Java Guava排序器Ordering原理及代碼實例
這篇文章主要介紹了Java Guava排序器Ordering原理及代碼實例,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-11-11
Java實戰花店商城系統的實現流程
只學書上的理論是遠遠不夠的,只有在實戰中才能獲得能力的提升,本篇文章手把手帶你用java+Springboot+Maven+mybatis+Vue+Mysql實現一個花店商城系統,大家可以在過程中查缺補漏,提升水平2022-01-01
Java實現一個小說采集程序的簡單實例
下面小編就為大家?guī)?lái)一篇Java實現一個小說采集程序的簡單實例。小編覺得挺不錯的, 現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2016-06-06
簡單實現Java版學生管理系統
這篇文章主要為大家詳細介紹了簡單實現Java版學生管理系統,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2016-06-06
Java二維數組查找功能代碼實現
這篇文章主要介紹了Java二維數組查找功能代碼實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-06-06

