BeanUtils.copyProperties復制不生效的解決
前言
呵呵 前端時間使用 BeanUtils.copyProperties 的時候碰到了一個這樣的問題
我有兩個實體, 有同樣的屬性, 一個有給定的屬性的 getter, 另外一個有 給定的屬性的 setter, 但是 我使用 BeanUtils.copyProperties 的時候 把來源對象的這個屬性 復制不到 目標對象上面
然后 當時也跟蹤了一下代碼, 然后 這里整理一下 改代碼片段吧
然后在調試的過程中 也發現了一些其他的問題, 呵呵 算是額外的了解吧
一下代碼基于 : jdk1.8.0_211 + commons-beanutils 1.9.4
問題的排查
首先來一段測試用例, 里面主要包含了三個類, 一個測試類, 兩個實體類
package com.hx.test03;
import org.apache.commons.beanutils.BeanUtils;
/**
* Test24BeanUtilsCopy
*
* @author Jerry.X.He <970655147@qq.com>
* @version 1.0
* @date 2020-02-25 16:55
*/
public class Test24BeanUtilsCopy {
// Test24BeanUtilsCopy
// 1. 取的 source 的 propertyDescriptor
// 2. get, set 對應的類型不匹配
public static void main(String[] args) throws Exception {
Test24ImmutableEntity fromImmutable = new Test24ImmutableEntity("fromImmutable");
Test24MutableEntity fromMutable = new Test24MutableEntity("fromMutable");
Test24MutableEntity targetEntity = new Test24MutableEntity("targetEntity");
// does't work
BeanUtils.copyProperties(targetEntity, fromImmutable);
System.out.println(targetEntity.getAttr());
// does't work
BeanUtils.copyProperties(targetEntity, fromMutable);
System.out.println(targetEntity.getAttr());
}
}
package com.hx.test03;
/**
* ImmutablePayment
*
* @author Jerry.X.He <970655147@qq.com>
* @version 1.0
* @date 2020-02-25 16:32
*/
public class Test24ImmutableEntity {
// attr
private final String attr;
public Test24ImmutableEntity(String attr) {
this.attr = attr;
}
public String getAttr() {
return attr;
}
}
package com.hx.test03;
import java.util.Optional;
/**
* ImmutablePayment
*
* @author Jerry.X.He <970655147@qq.com>
* @version 1.0
* @date 2020-02-25 16:32
*/
public class Test24MutableEntity {
// attr
private String attr;
public Test24MutableEntity(String attr) {
this.attr = attr;
}
public Optional<String> getAttr() {
return Optional.of(attr);
}
// public String getAttr() {
// return attr;
// }
public void setAttr(String attr) {
this.attr = attr;
}
}
以上測試代碼輸出結果為 :

從測試代碼中可以看到這里有兩個 BeanUtils.copyProperties 的使用, 并且兩個都沒有拷貝成功, 我們一個一個的來看
首先是第一個 BeanUtils.copyProperties, 來源對象 和 目標對象分別為 ImmutableEntity 和 MutableEntity
ImmutableEntity 上面有 getAttr, MutableEntity 上面有 setAttr, 但是為什么沒有拷貝成功呢 ?
在下圖的地方打一個斷點 調試一下

調試發現 源對象是可讀的, 但是 目標對象不可寫?, 為什么呢?, 我們的 MutableEntity 不是有 setAttr 么

在 processPropertyDescriptor 方法之后, 我們發現 attr 屬性, 居然不可寫了 ?
具體到 processPropertyDescriptor 方法, 他主要干的事情是
// 1. 尋找 getter(存在多個merge) // First pass. Find the latest getter method. Merge properties // of previous getter methods. // 2. 尋找 setter(存在多個merge) // Second pass. Find the latest setter method which // has the same type as the getter method. // 3. merge getter & setter // At this stage we should have either PDs or IPDs for the // representative getters and setters. The order at which the // property descriptors are determined represent the // precedence of the property ordering.
以上注釋來自于 Introspector.java, 1, 2, 3 的注釋來自于我
我們這里重點關注 step2, 需要找到 類型匹配 getter 類型的 setter 方法, 但是我們這里的情況是 getter 返回值是 Optional, setter 返回值是 String, 因此類型不匹配 所以我們上面看到的結果是 有 getter, 沒得 setter
實際的上下文信息如下圖

以上便是 第一個 BeanUtils.copyProperties 不生效的原因了
第二個 BeanUtils.copyProperties, 原因也是同上, 不過直觀的理解來說, attr 是有 getter 并且有 setter 的, 但是 由于規范的約定, 因此 propertyDescriptor 里面有 getter, 沒得 setter
問題的擴展
package com.hx.test03;
import org.apache.commons.beanutils.BeanUtils;
/**
* BeanUtilsCopy
*
* @author Jerry.X.He <970655147@qq.com>
* @version 1.0
* @date 2020-02-24 12:49
*/
public class Test23BeanUtilsCopy {
// Test23BeanUtilsCopy
// 1. 取的 source 的 propertyDescriptor
// 2. get, set 對應的類型不匹配
public static void main(String[] args) throws Exception {
ImmutableEntity fromImmutable = new ImmutableEntity("fromImmutable");
MutableEntity fromMutable = new MutableEntity("fromMutable");
MutableEntity targetEntity = new MutableEntity("targetEntity");
// does't work
BeanUtils.copyProperties(targetEntity, fromImmutable);
System.out.println(targetEntity.getAttr());
// does't work
BeanUtils.copyProperties(targetEntity, fromMutable);
System.out.println(targetEntity.getAttr());
}
}
/**
* ImmutablePayment
*
* @author Jerry.X.He <970655147@qq.com>
* @version 1.0
* @date 2020-02-24 12:50
*/
class ImmutableEntity {
// attr
private final String attr;
public ImmutableEntity(String attr) {
this.attr = attr;
}
public String getAttr() {
return attr;
}
}
/**
* MutablePayment
*
* @author Jerry.X.He <970655147@qq.com>
* @version 1.0
* @date 2020-02-24 12:54
*/
class MutableEntity {
// attr
private String attr;
public MutableEntity(String attr) {
this.attr = attr;
}
// public Optional<String> getAttr() {
// return Optional.of(attr);
// }
public String getAttr() {
return attr;
}
public void setAttr(String attr) {
this.attr = attr;
}
}
我們吧如上代碼 整理到同一個文件中(這其實才是第一個 demo, 上文中的是第二個 demo), 并且調整了 MutableEntity.getter 使其和 setter 的類型能夠匹配
但是我們一跑, 發現結果還是有些出人意料

BeanUtilsBean 如下地方打一個斷點

我們發現這里有一個奇怪的現象, 源對象不可讀, 目標對象不可寫??, 這是怎么回事 ?
以 ImmutableEntity. getAttr 為例, 我們在 MethodUtils.getAccessableMethod 里面如下地方打一個斷點

我們發現 尋找目標的方法主要有圖中 三個地方
第一個是當前類, 另外一個是當前類實現的接口, 另外一個是 當前類的基類(上圖還有未截取完的一部分, 限定 method 必須為 public, 否則不允許訪問)
- 1. 在當前類查詢 : 首先需要限定當前類是 public(我們這里不滿足) public 允許訪問
- 2. 當前類實現的接口查詢 : 獲取接口以及父接口中 匹配方法名字, 參數列表 的方法
- 3. 當前類的基類查詢 : 獲取基類以及更上的基類中, 并且是 public 的基類, 匹配方法名字, 參數列表 的方法
因此, 我們這里的 第二個例子的 兩個 BeanUtils.copyProperties 也沒有生效
呵呵 不知道這個限定類為 public 的限定是否是 bug 呢?, 還是說 相關規范就是這么約定的呢 ?
以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。
相關文章
springboot2中session超時,退到登錄頁面方式
這篇文章主要介紹了springboot2中session超時,退到登錄頁面方式,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2022-01-01
jar包運行一段時間后莫名其妙掛掉線上問題及處理方案
這篇文章主要介紹了jar包運行一段時間后莫名其妙掛掉線上問題及處理方案,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2023-09-09
Springboot項目刪除項目同步target文件問題解決方案
這篇文章主要介紹了Springboot項目刪除項目同步target文件問題解決方案,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-12-12

