packages/apps/Bluetooth/src/com/android/bluetooth/avrcpcontroller/AvrcpControllerService.java
packages/apps/Bluetooth/src/com/android/bluetooth/avrcpcontroller/AvrcpControllerStateMachine.java
packages/apps/Bluetooth/src/com/android/bluetooth/a2dpsink/A2dpSinkService.java
packages/apps/Bluetooth/src/com/android/bluetooth/avrcpcontroller/AvrcpControllerService.java
packages/apps/Bluetooth/jni/com_android_bluetooth_avrcp_controller.cpp

一、藍牙音樂播放狀態

1、在AvrcpControllerService.java文件中onPlayStatusChanged()方法就是音樂播放狀態改變，該方法是由JNI層中com_android_bluetooth_avrcp_controller.cpp中調用java層的

private synchronized void onPlayStatusChanged(byte[] address, byte playStatus) {
    if (DBG) {
        Log.d(TAG, "onPlayStatusChanged " + playStatus);
    }
    int playbackState = PlaybackState.STATE_NONE;
    switch (playStatus) {
        case JNI_PLAY_STATUS_STOPPED:
            playbackState = PlaybackState.STATE_STOPPED;
            break;
        case JNI_PLAY_STATUS_PLAYING:
            playbackState = PlaybackState.STATE_PLAYING;
            break;
        case JNI_PLAY_STATUS_PAUSED:
            playbackState = PlaybackState.STATE_PAUSED;
            break;
        case JNI_PLAY_STATUS_FWD_SEEK:
            playbackState = PlaybackState.STATE_FAST_FORWARDING;
            break;
        case JNI_PLAY_STATUS_REV_SEEK:
            playbackState = PlaybackState.STATE_REWINDING;
            break;
        default:
            playbackState = PlaybackState.STATE_NONE;
    }
    BluetoothDevice device = BluetoothAdapter.getDefaultAdapter().getRemoteDevice(address);
    AvrcpControllerStateMachine stateMachine = getStateMachine(device);
    if (stateMachine != null) {
        stateMachine.sendMessage(
                AvrcpControllerStateMachine.MESSAGE_PROCESS_PLAY_STATUS_CHANGED, playbackState);
    }
}

2、在AvrcpControllerStateMachine.java文件中Connected類中

MESSAGE_PROCESS_PLAY_STATUS_CHANGED消息就是處理播放狀態的，然后通過廣播方式把該狀態發送出去

case MESSAGE_PROCESS_PLAY_STATUS_CHANGED:
    if (SystemProperties.get("persist.ivi.feature", "0").equals("1")) {
        A2dpSinkService a2dpSinkService = A2dpSinkService.getA2dpSinkService();
        Log.d(TAG, "the state: " + msg.arg1);
        if (a2dpSinkService != null && msg.arg1 != preAudioStatus) {
            preAudioStatus = msg.arg1;
            Log.d(TAG, "preAudioStatus: " + msg.arg1);
            if (msg.arg1 == PlaybackState.STATE_PLAYING) {
                //播放
                    a2dpSinkService.informPlayState(mDevice, true);
            } else if (msg.arg1 == PlaybackState.STATE_PAUSED) {
                //暫停
                    a2dpSinkService.informPlayState(mDevice, false);
            }
        }
    }
    Intent intent = new Intent("zqc.bluetooth.PLAY_STATUS_CHANGED");
intent.putExtra("zqc.bluetooth.PLAYBACK", msg.arg1);
mService.sendBroadcast(intent);
    mAddressedPlayer.setPlayStatus(msg.arg1);
    BluetoothMediaBrowserService.notifyChanged(mAddressedPlayer.getPlaybackState());
    if (mAddressedPlayer.getPlaybackState().getState()
            == PlaybackState.STATE_PLAYING
            && A2dpSinkService.getFocusState() == AudioManager.AUDIOFOCUS_NONE
            && !shouldRequestFocus()) {
        sendMessage(MSG_AVRCP_PASSTHRU,
                AvrcpControllerService.PASS_THRU_CMD_ID_PAUSE);
    }
    return true;

二、藍牙音樂中怎么獲取音樂信息

1、在AvrcpControllerService.java文件中onTrackChanged()方法中是獲取JNI層上報的音樂信息，該方法是由JNI層中com_android_bluetooth_avrcp_controller.cpp中調用java層的

private synchronized void onTrackChanged(byte[] address, byte numAttributes, int[] attributes,
        String[] attribVals) {
    if (DBG) {
        Log.d(TAG, "onTrackChanged");
    }

    BluetoothDevice device = BluetoothAdapter.getDefaultAdapter().getRemoteDevice(address);
    AvrcpControllerStateMachine stateMachine = getStateMachine(device);
    //該方法就是把藍牙音樂的信息傳遞給java層
    getElementAttrRsp(attributes,attribVals,numAttributes);
    if (stateMachine != null) {
        stateMachine.sendMessage(AvrcpControllerStateMachine.MESSAGE_PROCESS_TRACK_CHANGED,
                TrackInfo.getMetadata(attributes, attribVals));
    }
}

2、在AvrcpControllerService.java文件中g(shù)etElementAttrRsp()中，然后通過該方法中通過廣播告訴出去

private void getElementAttrRsp(int[] attr_id,String[] textArray,byte num_attr){
    String artist = null;
    String trackTitle = null;
    String album = null;
    for (int i = 0; i < num_attr; i++){
        switch (attr_id[i]) {
            case JNI_MEDIA_ATTR_ID_TITLE:
                trackTitle = textArray[i];
                if (trackTitle == null){
                    trackTitle = "Unknown";
                }
                break;
            case JNI_MEDIA_ATTR_ID_ARTIST:
                artist = textArray[i];
                if (artist == null){
                    artist = "Unknown";
                }
                break;
            case JNI_MEDIA_ATTR_ID_ALBUM:
                album = textArray[i];
                if (album == null){
                    album = "Unknown";
                }
                break;
        }
    }
    Intent intent = new Intent("com.android.getelementattrrsp");
    intent.putExtra("artist", artist);
    intent.putExtra("trackTitle",trackTitle);
    intent.putExtra("album",album);
    Log.d(TAG,"getElementAttrRsp,artist: " + artist + ",trackTitle: " + trackTitle + ",album: " + album);
    intent.addFlags(Intent.FLAG_RECEIVER_FOREGROUND);
    sendBroadcast(intent, ProfileService.BLUETOOTH_PERM);
}

三、設備藍牙音樂中上一首、下一首、暫停功能控制手機端

1、在AvrcpControllerService.java文件中sendPassThroughCmd()方法來控制暫停、播放、上一首、下一首等功能

public synchronized void sendPassThroughCmd(BluetoothDevice device, int keyCode, int keyState) {
    Log.v(TAG, "sendPassThroughCmd keyCode: " + keyCode + " keyState: " + keyState);
    if (device == null) {
        Log.e(TAG, "sendPassThroughCmd Device is null");
        return;
    }

    AvrcpControllerStateMachine stateMachine = getStateMachine(device);
    if (stateMachine != null) {
        stateMachine.sendMessage(AvrcpControllerStateMachine.MESSAGE_SEND_PASS_THROUGH_CMD,
            keyCode, keyState, device);
    }
}

2、在AvrcpControllerStateMachine.java文件中MESSAGE_SEND_PASS_THROUGH_CMD變量中通過JNI層來實現功能

case MESSAGE_SEND_PASS_THROUGH_CMD:
    BluetoothDevice device = (BluetoothDevice) msg.obj;
    mService.sendPassThroughCommandNative(Utils.getByteAddress(device), msg.arg1,
                    msg.arg2);
    return true;

到此這篇關于Android 控制車載藍牙播放音樂詳解流程的文章就介紹到這了,更多相關Android 控制車載藍牙內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: