void frmSimple::on_btnLoad1_clicked()
{
    //先設置數據模型,否則 setColumnWidth 不起作用
    ui->tableView->setModel(model);

    //設置列數及列標題和列寬
    model->setColumnCount(column);
    //簡便方法設置列標題集合
    model->setHorizontalHeaderLabels(columnNames);
    for (int i = 0; i < column; ++i) {
        ui->tableView->setColumnWidth(i, columnWidths.at(i));
    }

    //循環添加行數據
    QDateTime now = QDateTime::currentDateTime();
    model->setRowCount(row);
    for (int i = 0; i < row; ++i) {
        for (int j = 0; j < column; ++j) {
            QStandardItem *item = new QStandardItem;
            //最后一列顯示時間區別開來
            if (j == column - 1) {
                item->setText(now.addSecs(i).toString("yyyy-MM-dd HH:mm:ss"));
            } else {
                item->setText(QString("%1_%2").arg(i + 1).arg(j + 1));
            }
            model->setItem(i, j, item);
        }
    }
}

void frmSimple::on_btnCsv1_clicked()
{
    QString file = QUIHelper::appPath() + "/db/dataout_tableview.csv";
    DataHelper::DataOut(ui->tableView, model, 0, file, "測試標題", "測試信息");
    //打開剛才導出的文件
    QUIHelper::openFile(file, "導出測試信息");
}

void frmSimple::on_btnXls1_clicked()
{
    //通用函數直接傳入控件
#if 1
    QString file = QUIHelper::appPath() + "/db/dataout_tableview.xls";
    DataHelper::DataOut(ui->tableView, model, 1, file, "測試標題", "測試信息");
#else
    //不傳入文件名則會彈出對話框選擇保存文件名
    QString file = DataHelper::DataOut(ui->tableView, model, 1);
#endif
    //打開剛才導出的文件
    QUIHelper::openFile(file, "導出測試信息");
}

void frmSimple::on_btnPdf1_clicked()
{
    //通用函數直接傳入控件
    QString file = QUIHelper::appPath() + "/db/dataout_tableview.pdf";
    DataHelper::DataOut(ui->tableView, model, 2, file, "測試標題", "測試信息");
    //打開剛才導出的文件
    QUIHelper::openFile(file, "導出測試信息");
}

void frmSimple::on_btnPrint1_clicked()
{
    //通用函數直接傳入控件
    DataHelper::DataOut(ui->tableView, model, 3, "", "測試標題");
}

void frmSimple::on_btnLoad2_clicked()
{
    //設置列標題和列數及列寬
    ui->tableWidget->setColumnCount(column);
    //簡便方法設置列標題集合
    ui->tableWidget->setHorizontalHeaderLabels(columnNames);
    for (int i = 0; i < column; ++i) {
        ui->tableWidget->setColumnWidth(i, columnWidths.at(i));
    }

    //添加數據
    QDateTime now = QDateTime::currentDateTime();
    ui->tableWidget->setRowCount(row);
    for (int i = 0; i < row; ++i) {
        for (int j = 0; j < column; ++j) {
            QTableWidgetItem *item = new QTableWidgetItem;
            //最后一列顯示時間區別開來
            if (j == column - 1) {
                item->setText(now.addSecs(i).toString("yyyy-MM-dd HH:mm:ss"));
            } else {
                item->setText(QString("%1_%2").arg(i + 1).arg(j + 1));
            }
            ui->tableWidget->setItem(i, j, item);
        }
    }
}

void frmSimple::on_btnCsv2_clicked()
{
    QString file = QUIHelper::appPath() + "/db/dataout_tablewidget.csv";
    DataHelper::DataOut(ui->tableWidget, 0, file, "測試標題", "測試信息");
    //打開剛才導出的文件
    QUIHelper::openFile(file, "導出測試信息");
}

void frmSimple::on_btnXls2_clicked()
{
    QString file = QUIHelper::appPath() + "/db/dataout_tablewidget.xls";
    DataHelper::DataOut(ui->tableWidget, 1, file, "測試標題", "測試信息");
    //打開剛才導出的文件
    QUIHelper::openFile(file, "導出測試信息");
}

void frmSimple::on_btnPdf2_clicked()
{
    //通用函數直接傳入控件
    QString file = QUIHelper::appPath() + "/db/dataout_tablewidget.pdf";
    DataHelper::DataOut(ui->tableWidget, 2, file, "測試標題", "測試信息");
    //打開剛才導出的文件
    QUIHelper::openFile(file, "導出測試信息");
}

void frmSimple::on_btnPrint2_clicked()
{
    //通用函數直接傳入控件
    DataHelper::DataOut(ui->tableWidget, 3, "", "測試標題");
}