C#?使用Aspose.Cells?導出Excel的步驟及問題記錄
更新時間：2022年01月27日 08:38:26 作者：我本梁人
Aspose.Cells是一款功能強大的Excel文檔處理和轉換控件，開發人員和客戶電腦無需安裝Microsoft Excel也能在應用程序中實現類似Excel的強大數據管理功能，對C#?使用Aspose.Cells?導出Excel的步驟及問題記錄感興趣的朋友一起看看吧
今天在工作中碰到同事用了一種新型的方式導入excel，在此做個學習記錄。
Aspose.Cells簡介：Aspose.Cells是一款功能強大的Excel文檔處理和轉換控件，開發人員和客戶電腦無需安裝Microsoft Excel也能在應用程序中實現類似Excel的強大數據管理功能，支持所有Excel格式類型的操作，在沒有Microsoft Excel的環境下，用戶也可為其應用程序嵌入類似Excel的強大數據管理功能。
插件：Aspose.Cells
第一步:準備好導出的模板，例子：
C#代碼：
#region 驗證數據
if (model == null)
{
throw new FriendlyException("無該月結單！");
}
var templatePath = @"Template\trade\Cecsc2bHN\分包分供月度結算審批表.xlsx"; ;
var resFileName = string.Empty;
var bigTitle = string.Empty;
var barCodeStr = string.Empty;
if (string.IsNullOrEmpty(templatePath) || !File.Exists(templatePath))
throw new FriendlyException("未找到模板文件！");
#endregion
#region 初始化模板文件
var wk = new Workbook(templatePath);
var designer = new WorkbookDesigner(wk);
#region 數據重構造
// 工程形象進度
#region 構造頭部信息
var topInfo = new Dictionary<string, object>
{ "Title", bigTitle },
{ "ProjectName", model.ProjectName },
{ "Code", barCodeStr }
};
MonthSettlementInfo monthInfo = new MonthSettlementInfo()
CurrentInContractSettlementAmount = 56.32M,
TerminalInContractSettlementAmount = 123.32M,
CurrentOutContractSettlementAmount = 6.32M,
TerminalOutContractSettlementAmount = 5.32M,
CurrentDeductionSettlementAmount = 12.32M,
TerminalDeductionSettlementAmount = 26.32M,
CurrentInContractSafeAmount = 2.32M,
TerminalInContractSafeAmount = 1.32M,
CurrentOutContractSafeAmount = 6.32M,
TerminalOutContractSafeAmount = 8.32M,
CurrentDeductionSafeAmount = 4.32M,
TerminalDeductionSafeAmount = 3.32M,
//形象進度描述
List<TradeSettleReportProjectProgressItemModel> ProjectProgressList = new List<TradeSettleReportProjectProgressItemModel>();
for (int i = 0; i < 3; i++)
TradeSettleReportProjectProgressItemModel Progressmodel = new TradeSettleReportProjectProgressItemModel()
{
ConstractArea = "測試水水水水水水" + i,
Remark = "測試模擬的備注" + i,
ProgressDesc = "測試撒子怕發送所屬" + i,
ConstractSite = "場地" + i
};
ProjectProgressList.Add(Progressmodel);
#region 工程名稱
//綁定數據到excel中
//designer.SetDataSource("綁定的到excle的變量名"，"對應的值")
designer.SetDataSource("ProgressItem", ProjectProgressList); //list可以循環綁定 綁定的例子在下面。
designer.SetDataSource("ProjectName", model.ProjectName);
designer.SetDataSource("ContractName", model.ContractName);
designer.SetDataSource("ContractCode", model.ContractCode);
designer.SetDataSource("MonthSettlementNo", model.MonthSettlementNo);
designer.SetDataSource("ContractingUnit", model.ContractingUnit);
designer.SetDataSource("SettlementCode", model.SettlementCode);
designer.SetDataSource("EnterpriseName", model.EnterpriseName);
designer.SetDataSource("ThirdPartyName", model.ThirdPartyName);
designer.SetDataSource("SettlementMonth", model.SettlementMonth);
designer.SetDataSource("TotalContractAmount", model.TotalContractAmount);
designer.SetDataSource("SettlementAmountCapitalize", model.SettlementAmountCapitalize);
#region 尾部
#endregion
designer.Process();
wk.CalculateFormula();
#region 重新計算行高
var startRow = 9;
var endRow = startRow;
#region 導出文件
var fileName = $"{model.SettlementMonth.ToString("yyyy年MM月")}{resFileName}.xlsx";
using (var file = new MemoryStream())
wk.Save(file, SaveFormat.Xlsx);
wk.Dispose();
return new KeyValuePair<string, byte[]>(fileName, file.ToArray());此種當時的重點是Excel模板的數據綁定：
第一種：單個值的綁定
第二種：列表值的循環綁定
完整代碼
Service層：
public KeyValuePair<string, byte[]> ExportSettle(TradeSettleReportModel model)
{
#region 驗證數據
if (model == null)
{
throw new FriendlyException("無該月結單！");
}
var templatePath = @"Template\trade\Cecsc2bHN\分包分供月度結算審批表.xlsx"; ;
var resFileName = string.Empty;
var bigTitle = string.Empty;
var barCodeStr = string.Empty;
if (string.IsNullOrEmpty(templatePath) || !File.Exists(templatePath))
throw new FriendlyException("未找到模板文件！");
#endregion
#region 初始化模板文件
var wk = new Workbook(templatePath);
var designer = new WorkbookDesigner(wk);
#region 數據重構造
// 工程形象進度
#region 構造頭部信息
var topInfo = new Dictionary<string, object>
{ "Title", bigTitle },
{ "ProjectName", model.ProjectName },
{ "Code", barCodeStr }
};
MonthSettlementInfo monthInfo = new MonthSettlementInfo()
CurrentInContractSettlementAmount = 56.32M,
TerminalInContractSettlementAmount = 123.32M,
CurrentOutContractSettlementAmount = 6.32M,
TerminalOutContractSettlementAmount = 5.32M,
CurrentDeductionSettlementAmount = 12.32M,
TerminalDeductionSettlementAmount = 26.32M,
CurrentInContractSafeAmount = 2.32M,
TerminalInContractSafeAmount = 1.32M,
CurrentOutContractSafeAmount = 6.32M,
TerminalOutContractSafeAmount = 8.32M,
CurrentDeductionSafeAmount = 4.32M,
TerminalDeductionSafeAmount = 3.32M,
//審批記錄
List<TradeSettleReportApprovalCommentsModel> approveModelList = new List<TradeSettleReportApprovalCommentsModel>();
for (int i = 0; i < 2; i++)
TradeSettleReportApprovalCommentsModel approveModel = new TradeSettleReportApprovalCommentsModel()
{
Approver = "admin" + i,
Comments = "審批通過" + i,
NodeName = "測試模板" + i,
Seq = i
};
approveModelList.Add(approveModel);
//形象進度描述
List<TradeSettleReportProjectProgressItemModel> ProjectProgressList = new List<TradeSettleReportProjectProgressItemModel>();
for (int i = 0; i < 3; i++)
TradeSettleReportProjectProgressItemModel Progressmodel = new TradeSettleReportProjectProgressItemModel()
ConstractArea = "測試水水水水水水" + i,
Remark = "測試模擬的備注" + i,
ProgressDesc = "測試撒子怕發送所屬" + i,
ConstractSite = "場地" + i
ProjectProgressList.Add(Progressmodel);
#region 工程名稱
designer.SetDataSource("CurrentInContractSettlementAmount", monthInfo.CurrentInContractSettlementAmount);
designer.SetDataSource("TerminalInContractSettlementAmount", monthInfo.TerminalInContractSettlementAmount);
designer.SetDataSource("CurrentOutContractSettlementAmount", monthInfo.CurrentOutContractSettlementAmount);
designer.SetDataSource("TerminalOutContractSettlementAmount", monthInfo.TerminalOutContractSettlementAmount);
designer.SetDataSource("CurrentDeductionSettlementAmount", monthInfo.CurrentDeductionSettlementAmount);
designer.SetDataSource("TerminalDeductionSettlementAmount", monthInfo.TerminalDeductionSettlementAmount);
designer.SetDataSource("CurrentInContractSafeAmount", monthInfo.CurrentInContractSafeAmount);
designer.SetDataSource("TerminalInContractSafeAmount", monthInfo.TerminalInContractSafeAmount);
designer.SetDataSource("CurrentOutContractSafeAmount", monthInfo.CurrentOutContractSafeAmount);
designer.SetDataSource("TerminalOutContractSafeAmount", monthInfo.TerminalOutContractSafeAmount);
designer.SetDataSource("CurrentDeductionSafeAmount", monthInfo.CurrentDeductionSafeAmount);
designer.SetDataSource("TerminalDeductionSafeAmount", monthInfo.TerminalDeductionSafeAmount);
designer.SetDataSource("DetailItem", approveModelList);
designer.SetDataSource("ProgressItem", ProjectProgressList);
designer.SetDataSource("ProjectName", model.ProjectName);
designer.SetDataSource("ContractName", model.ContractName);
designer.SetDataSource("ContractCode", model.ContractCode);
designer.SetDataSource("MonthSettlementNo", model.MonthSettlementNo);
designer.SetDataSource("ContractingUnit", model.ContractingUnit);
designer.SetDataSource("SettlementCode", model.SettlementCode);
designer.SetDataSource("EnterpriseName", model.EnterpriseName);
designer.SetDataSource("ThirdPartyName", model.ThirdPartyName);
designer.SetDataSource("SettlementMonth", model.SettlementMonth);
designer.SetDataSource("TotalContractAmount", model.TotalContractAmount);
designer.SetDataSource("SettlementAmountCapitalize", model.SettlementAmountCapitalize);
#region 預算編號
//var _dic = this.GetLaborProSettleInfo(exportDataSource);
//foreach (var item in _dic)
//{
// designer.SetDataSource(item.Key, item.Value);
//}
#region 寫入數據
//foreach (var keyValuePair in topInfo)
// designer.SetDataSource(keyValuePair.Key, keyValuePair.Value);
//designer.SetDataSource("ProjectProgress", exportDataSource.ProjectProgressItems);
//designer.SetDataSource("MonthEstimate", exportDataSource.MonthEstimateOutputs);
#region 表1
//
Dictionary<string, decimal> dic = new Dictionary<string, decimal>();
if (dic != null)
foreach (var item in dic)
designer.SetDataSource(item.Key, item.Value);
}
#region 尾部
#region 刪除模板sheet
//wk.Worksheets.RemoveAt(wk.Worksheets["表2"].Index);
//wk.Worksheets.RemoveAt(wk.Worksheets["表3"].Index);
designer.Process();
wk.CalculateFormula();
#region 插入條形碼
//var barCode = BarCodeGenerator.GetBarCodePNG(barCodeStr);
//var barCode = BarCodeGenerator.WriteQRCodeImg(barCodeStr);
//wk.Worksheets[0].Pictures.Add(0, 0, 1, 1, new MemoryStream(barCode));
//wk.Worksheets[0].Pictures[0].Width = 60;
#region 重新計算行高
var startRow = 9;
var endRow = startRow;
#region 導出文件
var fileName = $"{model.SettlementMonth.ToString("yyyy年MM月")}{resFileName}.xlsx";
using (var file = new MemoryStream())
wk.Save(file, SaveFormat.Xlsx);
wk.Dispose();
return new KeyValuePair<string, byte[]>(fileName, file.ToArray());
}Interface層：
KeyValuePair<string, byte[]> ExportSettle(TradeSettleReportModel model);
Controller層：
[AllowAnonymous]
[HttpPost("Export")]
public async Task<IActionResult> Export()
{
TradeSettleReportModel model = new TradeSettleReportModel()
{
ProjectName = "測刷",
ContractName = "測試合同名稱",
ContractCode = "0010101012E",
MonthSettlementNo = "0010101012E",
ContractingUnit = "重慶市",
SettlementCode = "EW2Z4523",
EnterpriseName = "WZQ我在錢錢錢",
ThirdPartyName = "第三方地中四年",
SettlementMonth = DateTime.Now,
SettlementAmountCapitalize = "壹拾貳萬叁仟壹佰貳拾叁元貳角伍分",
};
var result = await Task.Run(() => tradeSettleCommonService.ExportSettle(model));
return File(result.Value, "application/octet-stream", result.Key);
}到此這篇關于C# 使用Aspose.Cells 導出Excel的文章就介紹到這了,更多相關C# 導出Excel內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
C#打包應用程序,與.NETFramework介紹
C#打包應用程序,與.NETFramework介紹，需要的朋友可以參考一下2013-05-05
多線程和異步操作兩者都可以達到避免調用線程阻塞的目的，從而提高軟件的可響應性。甚至有些時候我們就認為多線程和異步操作是等同的概念。但是，多線程和異步操作還是有一些區別的。而這些區別造成了使用多線程和異步操作的時機的區別2017-06-06
c#編寫webservice服務引用實例分享
c#編寫webservice服務引用實例分享,大家參考使用吧2013-12-12
C# 創建文本文件寫入讀取實現代碼
C# 創建文本文件寫入讀取,可以用來做系統日志或程序操作日志或者錯誤記錄，需要的朋友可以參考下。2011-11-11
這篇文章主要介紹了c# 三種方法調用WebService接口的相關資料，文中示例代碼非常詳細，幫助大家更好的理解和學習，感興趣的朋友可以了解下2020-07-07
布隆過濾器（Bloom filter）是一種特殊的 Hash Table，能夠以較小的存儲空間較快地判斷出數據是否存在。常用于允許一定誤判率的數據過濾及防止緩存擊穿及等場景,本文將以 C# 語言來實現一個簡單的布隆過濾器，為簡化說明，設計得很簡單，需要的朋友可以參考下2022-06-06
詳解WPF雙滑塊控件的使用和強制捕獲鼠標事件焦點
這篇文章主要為大家詳細介紹了WPF中雙滑塊控件的使用和強制捕獲鼠標事件焦點的實現，文中的示例代碼講解詳細，感興趣的可以嘗試一下2022-07-07
C#創建Windows Service(Windows 服務)的方法步驟
本文介紹了如何用C#創建、安裝、啟動、監控、卸載簡單的Windows Service 的內容步驟和注意事項,具有一定的參考價值,感興趣的可以了解一下2023-11-11
這篇文章主要介紹了C#設置窗體最大化且不遮擋任務欄的方法,涉及針對form窗體的寬和高的相對大小操作,是非常簡單而實用的技巧,需要的朋友可以參考下2014-12-12
這篇文章主要介紹了c#與js隨機數生成方法,實例分析了C#與js生成隨機數的技巧,具有一定參考借鑒價值,需要的朋友可以參考下2015-02-02