欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

springboot集成junit編寫單元測試實戰

 更新時間:2022年02月23日 10:54:00   作者:mb61f5029be6939  
在做單元測試時,代碼覆蓋率常常被拿來作為衡量測試好壞的指標,本文主要介紹了springboot集成junit編寫單元測試實戰,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下

在做單元測試時,代碼覆蓋率常常被拿來作為衡量測試好壞的指標,甚至,用代碼覆蓋率來考核測試任務完成情況,比如,代碼覆蓋率必須達到80%或 90%。于是乎,測試人員費盡心思設計案例覆蓋代碼。用代碼覆蓋率來衡量,有利也有弊。

首先,讓我們先來了解一下所謂的“代碼覆蓋率”。我找來了所謂的定義:代碼覆蓋率 = 代碼的覆蓋程度,一種度量方式。

一:查看jar包版本號是否為junit4;

java中springboot集成junit編寫單元測試(實戰+坑)_mvc

junit自身注解:

@BeforeClass 全局只會執行一次,而且是第一個運行
@Before 在測試方法運行之前運行
@Test 測試方法
@After 在測試方法運行之后允許
@AfterClass 全局只會執行一次,而且是最后一個運行
@Ignore 忽略此方法

坑:為什么要先看版本號因?yàn)樵趈unit5中@Before無效需要使用@BeforeEach;

二:實戰應用:

idea快捷創建測試類:

1.首先要保證有test類,和main同級:

java中springboot集成junit編寫單元測試(實戰+坑)_spring_02

2.創建

java中springboot集成junit編寫單元測試(實戰+坑)_代碼覆蓋率_03

java中springboot集成junit編寫單元測試(實戰+坑)_代碼覆蓋率_04

編輯

添加圖片注釋,不超過 140 字(可選)

java中springboot集成junit編寫單元測試(實戰+坑)_代碼覆蓋率_05

3.編寫單元測試

@RunWith(SpringRunner.class):運行器指定
@SpringBootTest(classes =IotSystemApplication.class, webEnvironment =SpringBootTest.WebEnvironment.DEFINED_PORT)
@Slf4j

可選參數

@ActiveProfiles("baseline") :表示項目啟動參數為-baseline
@Transactional :回滾
import com.shimao.iot.common.entity.ResultListVO;
import com.shimao.iot.common.entity.ResultVO;
import com.shimao.iot.common.model.dict.vo.AreaDictGangVo;
import com.shimao.iot.common.model.dict.vo.AreaDictVo;
import com.shimao.iot.system.IotSystemApplication;
import lombok.extern.slf4j.Slf4j;
import org.junit.Assert;
import org.junit.jupiter.api.Test;
import org.junit.runner.RunWith;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.boot.test.autoconfigure.web.servlet.AutoConfigureMockMvc;
import org.springframework.boot.test.context.SpringBootTest;
import org.springframework.test.context.ActiveProfiles;
import org.springframework.test.context.junit4.SpringRunner;
import org.springframework.test.web.servlet.MockMvc;
import org.springframework.transaction.annotation.Transactional;
import org.springframework.web.context.WebApplicationContext;
import java.util.ArrayList;
import java.util.List;
import java.util.Map;
/**
* @author zhangtonghao
* @create 2022-02-16 11:00
*/
@ActiveProfiles("baseline")
@RunWith(SpringRunner.class)
@SpringBootTest(classes =IotSystemApplication.class, webEnvironment =SpringBootTest.WebEnvironment.DEFINED_PORT)
@AutoConfigureMockMvc
@Transactional
@Slf4j
class AreaDictionaryControllerTest {
    private MockMvc mockMvc;
    @Autowired
    private AreaDictionaryController controller;
    @Autowired
    private WebApplicationContext webApplicationContext;
    /*@BeforeEach  初始化數據
void setUp() throws Exception {
mockMvc = MockMvcBuilders.webAppContextSetup(webApplicationContext).build();
}*/
    @Test   
    void getRegionDetail() {
        ResultListVO<AreaDictGangVo> regionDetail =controller.getRegionDetail("");
        System.out.println("======測試成功:" +regionDetail);
        String name ="華北";
        regionDetail =controller.getRegionDetail(name);
        Assert.assertNotNull(regionDetail);
        System.out.println("======測試成功:" +regionDetail);
    }
    @Test
    void testGetRegionDetail() {
        Long areaCode =100001L;
        ResultVO<AreaDictVo> regionDetail =controller.getRegionDetail(areaCode);
        Assert.assertNotNull(regionDetail);
        System.out.println("======測試成功:" +regionDetail);
    }
    @Test
    void getAreaTypeDetails() {
        Integer areaCode =100001;
        ResultListVO<AreaDictVo> resultListVO =controller.getAreaTypeDetails(areaCode);
        Assert.assertNotNull(resultListVO);
        System.out.println("======測試成功:" +resultListVO);
    }
    @Test
    void getSubrangeDetail() {
        Long areaCode =100001L;
        ResultListVO<AreaDictVo> resultListVO =controller.getSubrangeDetail(areaCode);
        Assert.assertNotNull(resultListVO);
        System.out.println("======測試成功:" +resultListVO);
    }
    @Test
    void getGangDetail() {
        Long areaCode =100001L;
        ResultVO<AreaDictGangVo> resultListVO =controller.getGangDetail(areaCode);
        Assert.assertNotNull(resultListVO);
        System.out.println("======測試成功:" +resultListVO);
    }
    @Test
    void findAreaDictList() {
        Long areaCode =100001L;
        List<Long> areaCodes =new ArrayList<>();
        areaCodes.add(areaCode);
        List<AreaDictVo> resultListVO =controller.findAreaDictList(areaCodes);
        Assert.assertNotNull(resultListVO);
        System.out.println("======測試成功:" +resultListVO);
    }
    @Test
    void findAreaDictParentMap() {
        Long areaCode =100001L;
        List<Long> areaCodes =new ArrayList<>();
        areaCodes.add(areaCode);
        Map<Long, AreaDictVo> resultListVO =controller.findAreaDictParentMap(areaCodes);
        Assert.assertNotNull(resultListVO);
        System.out.println("======測試成功:" +resultListVO);
    }
    @Test
    void queryProvinceAndCity() {
        ResultListVO<AreaDictVo> resultListVO =controller.queryProvinceAndCity();
        Assert.assertNotNull(resultListVO);
    }
}

4.啟動測試:正常啟動我就不說了說下如何查看覆蓋率啟動

首先需要安裝junit插件,然后啟動:

java中springboot集成junit編寫單元測試(實戰+坑)_mvc_06

java中springboot集成junit編寫單元測試(實戰+坑)_mvc_07

注意點:其實書寫單元測試沒有什么技巧,只有一個參數問題;你能保證參數正確就可以讓測試覆蓋率更高。這都需要看代碼實現,所以不用妄想一鍵生成覆蓋率達到百分之80啥的了,不存在的。下面還有一些可用的技巧和講解,著急的可以不用看直接回去寫代碼去了。

三:擴展

某些對象類的單元測試:

/**

* 調用VO DTO POJO MODEL等服務通用方法
*/
@Test
public void testDto() {
    HeartDtoheartDto = newHeartDto();
    testGetAndSet(heartDto);
    heartDto.toString();
    heartDto.equals(newObject());
    heartDto.hashCode();
    AlllogDtoallLogDto = newAlllogDto();
    testGetAndSet(allLogDto);
    allLogDto.toString();
    allLogDto.equals(newObject());
    allLogDto.hashCode();
}
/**
* JavaBean屬性名要求:前兩個字母要么都大寫,要么都小寫
* 對于首字母是一個單詞的情況,要么過濾掉,要么自己拼方法名
* f.isSynthetic()過濾合成字段
*/
private static void testGetAndSet(Object t) {
    try {
        Class modelClass =t.getClass();
        Object obj =modelClass.newInstance();
        Field[] fields =modelClass.getDeclaredFields();
        for (Fieldf :fields) {
            if (f.getName().equals("aLike") ||f.isSynthetic()) {
                continue;
            }
            PropertyDescriptorpd = newPropertyDescriptor(f.getName(), modelClass);
            Methodget =pd.getReadMethod();
            Methodset =pd.getWriteMethod();
            set.invoke(obj, get.invoke(obj));
        }
    } catch (Exception e) {
        e.printStackTrace();
    }
}

斷言列表:

-------------->assertTrue(String message, boolean condition)             要求condition == true
-------------->assertFalse(String message, boolean condition)            要求condition == false
-------------->assertEquals(String message, XXX expected,XXX actual) 要求expected期望的值能夠等于actual
-------------->assertArrayEquals(String message, XXX[] expecteds,XXX [] actuals) 要求expected.equalsArray(actual)
-------------->assertNotNull(String message, Object object)          要求object!=null
-------------->assertNull(String message, Object object)             要求object==null
-------------->assertSame(String message, Object expected, Object actual)     要求expected == actual
-------------->assertNotSame(String message, Object unexpected,Object actual) 要求expected != actual
-------------->assertThat(String reason, T actual, Matcher matcher)  要求matcher.matches(actual) == true
-------------->fail(String message) 要求執行的目標結構必然失敗,同樣要求代碼不可達,即是這個方法在程序運行后不會成功返回,如果成功返回了則報錯

代碼覆蓋程度的度量方式是有很多種的,這里介紹一下最常用的幾種:

1. 語句覆蓋(StatementCoverage)

又稱行覆蓋(LineCoverage),段覆蓋(SegmentCoverage),基本塊覆蓋(BasicBlockCoverage),這是最常用也是最常見的一種覆蓋方式,就是度量被測代碼中每個可執行語句是否被執行到了。這里說的是“可執行語句”,因此就不會包括像C++的頭文件聲明,代碼注釋,空行,等等。非常好理解,只統計能夠執行的代碼被執行了多少行。需要注意的是,單獨一行的花括號{} 也常常被統計進去。語句覆蓋常常被人指責為“最弱的覆蓋”,它只管覆蓋代碼中的執行語句,卻不考慮各種分支的組合等等。假如你的上司只要求你達到語句覆蓋,那么你可以省下很多功夫,但是,換來的確實測試效果的不明顯,很難更多地發現代碼中的問題。

2. 判定覆蓋(DecisionCoverage)

又稱分支覆蓋(BranchCoverage),所有邊界覆蓋(All-EdgesCoverage),基本路徑覆蓋(BasicPathCoverage),判定路徑覆蓋(Decision-Decision-Path)。它度量程序中每一個判定的分支是否都被測試到了。這句話是需要進一步理解的,應該非常容易和下面說到的條件覆蓋混淆。因此我們直接介紹第三種覆蓋方式,然后和判定覆蓋一起來對比,就明白兩者是怎么回事了。

3. 條件覆蓋(ConditionCoverage)

它度量判定中的每個子表達式結果true和false是否被測試到了。

4. 路徑覆蓋(PathCoverage)

又稱斷言覆蓋(PredicateCoverage)。它度量了是否函數的每一個分支都被執行了。這句話也非常好理解,就是所有可能的分支都執行一遍,有多個分支嵌套時,需要對多個分支進行排列組合,可想而知,測試路徑隨著分支的數量指數級別增加。

到此這篇關于springboot集成junit編寫單元測試實戰的文章就介紹到這了,更多相關springboot junit單元測試內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

最新評論