由于公司開發項目需要遷移部署到Linux環境部署運行，之前項目中生成Zip壓縮文件的代碼邏輯在Linux運行生成壓縮文件不正常，今天通過本文給大家分享.Net?生成壓縮文件問題記錄，感興趣的朋友一起看看吧

一、起因

　由于公司開發項目需要遷移部署到Linux環境部署運行，之前項目中生成Zip壓縮文件的代碼邏輯在Linux運行生成壓縮文件不正常。

　本篇記錄文件排查處理過程。

二、問題現象

壓縮文件生成目錄不正確，文件目錄為：\root\ziptest\upgrade\_dsconnCfg.txt(項目部署目錄)
壓縮文件數量不正確
壓縮文件最后修改時間不匹配

　待壓縮文件：

　壓縮結果：

三、解決過程：

　1、原始實現壓縮的主要邏輯：

using System.IO.Compression;
using System.IO;
/// <summary>
/// 文件壓縮類
/// </summary>
public class ZipHelper
{
    /// <summary>
    /// 單文件壓縮成ZIP
    /// </summary>
    /// <param name="fileSource">源文件路徑</param>
    /// <param name="fileOut">ZIP文件路徑</param>
    /// <param name="fileName">ZIP文件名</param>
    /// <returns></returns>
    public static bool SimpleFileZip(string fileSource, string fileOut, string fileName)
    {
        try
        {
            using (FileStream zipFileToOpen = new FileStream(fileOut, FileMode.Create))
            {
                using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Create))
                {
                    ZipFile(fileSource, fileName, archive);
                }
            }
        }
        catch
        {
            return false;
        }
        return true;
    }
    /// <summary>
    /// 多文件壓縮成ZIP
    /// </summary>
    /// <param name="fileSource">源文件路徑</param>
    /// <param name="fileOut">ZIP文件路徑</param>
    /// <param name="fileName">ZIP文件名</param>
    /// <returns></returns>
    public static bool FilesZip(List<string> fileSources, string fileOut)
    {
        try
        {
            using (FileStream zipFileToOpen = new FileStream(fileOut, FileMode.Create))
            {
                using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Create))
                {
                    foreach (var file in fileSources)
                    {　　　　　　　　　　　　　　 //計算相對路徑
                        string fileName = file.Replace(AppConsts.ServerUpdateFile + "\\", "");
                        ZipFile(file, fileName, archive);
                    }
                }
            }
        }
        catch
        {
            return false;
        }
        return true;
    }
    private static void ZipFile(string fileSource, string fileName, ZipArchive archive)
    {
        ZipArchiveEntry readMeEntry = archive.CreateEntry(fileName);　　　　　//設置文件最后修改時間
        readMeEntry.LastWriteTime = File.GetLastWriteTime(fileSource);
        using (Stream stream = readMeEntry.Open())
        {
            byte[] bytes = File.ReadAllBytes(fileSource);
            stream.Write(bytes, 0, bytes.Length);
        }
    }
}

　2、生成路徑不正確問題：通過對代碼檢測發現，在代碼中處理邏輯對目錄路徑替換處理時：使用了"\\"；導致在Linux代碼無效。修改對于代碼為以下內容：

/// <summary>
/// 多文件壓縮成ZIP
/// </summary>
/// <param name="fileSource">源文件路徑</param>
/// <param name="fileOut">ZIP文件路徑</param>
/// <param name="fileName">ZIP文件名</param>
/// <returns></returns>
public static bool FilesZip(List<string> fileSources, string fileOut)
{
    try
    {
        using (FileStream zipFileToOpen = new FileStream(fileOut, FileMode.OpenOrCreate))
        {
            using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Update))
            {
                foreach (var file in fileSources)
                {　　　　　　　　　　　　//計算壓縮文件相對路徑：目錄/文件名
                    string fileName = file.Replace(AppConsts.ServerUpdateFile + Path.DirectorySeparatorChar, "");
                    ZipFile(file, fileName, archive);
                }
            }
        }
    }
    catch (Exception ex)
    {
        Console.WriteLine($"ERROR：{ex}");
        return false;
    }
    return true;
}

　3、排查生成文件數量異常問題，輸出異常信息。

ERROR：Cannot modify entry in Create mode after entry has been opened for writing.
at System.IO.Compression.ZipArchiveEntry.set_LastWriteTime(DateTimeOffset value)
at zlWebPluginsUpgradeServer.Upgrade.ZipHelper.ZipFile(String fileSource, String fileName, ZipArchive archive) in F:\coding\ZlsoftClientService\zlWebPluginsUpgradeServer\UpgradeMode\ZipHelper.cs:line 84
at zlWebPluginsUpgradeServer.Upgrade.ZipHelper.FilesZip(List`1 fileSources, String fileOut) in F:\coding\ZlsoftClientService\zlWebPluginsUpgradeServer\UpgradeMode\ZipHelper.cs:line 62

　　發現因?yàn)樯蓧嚎s文件后設置最后修改時間異常，導致生成壓縮文件數量不正確；且最后修改時間不匹配。

　4、根據日志，調整

using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Update))

到此以上在Linux中生成壓縮文件問題都已解決。

四、總結：

　1、代碼中路徑操作，不要使用固定字符串；應該使用Path類提供的相關字段、方法操作

　2、設置壓縮項屬性時，需要使用Update模式。

最后放上壓縮幫助類：

/// <summary>
/// 文件壓縮類
/// </summary>
public class ZipHelper
{
    /// <summary>
    /// 單文件壓縮成ZIP
    /// </summary>
    /// <param name="fileSource">源文件路徑</param>
    /// <param name="fileOut">ZIP文件路徑</param>
    /// <param name="fileName">ZIP文件名：相對路徑</param>
    /// <returns></returns>
    public static void SimpleFileZip(string fileSource, string fileOut, string fileName)
    {
        using (FileStream zipFileToOpen = new FileStream(fileOut, FileMode.OpenOrCreate))
        {
            using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Update))
            {
                fileName = fileName.Trim(Path.DirectorySeparatorChar);
                ZipFile(fileSource, fileName, archive);
            }
        }
    }

    /// <summary>
    /// 多文件壓縮成ZIP
    /// </summary>
    /// <param name="fileSource">源文件路徑</param>
    /// <param name="fileOut">ZIP文件路徑</param>
    /// <param name="fileName">ZIP文件名</param>
    /// <returns></returns>
    public static void FilesZip(List<string> fileSources, string fileOut)
    {
        using (FileStream zipFileToOpen = new FileStream(fileOut, FileMode.OpenOrCreate))
        {
            using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Update))
            {
                foreach (var file in fileSources)
                {
                    string fileName = file.Replace(AppConsts.ServerUpdateFile + Path.DirectorySeparatorChar, "");
                    ZipFile(file, fileName, archive);
                }
            }
        }
    }

    /// <summary>
    /// 壓縮指定文件夾
    /// </summary>
    /// <param name="sourceDirectory"></param>
    /// <param name="fileOut"></param>
    public static void DirectoryZip(string sourceDirectory, string fileOut)
    {
        string[] allFiles = Directory.GetFiles(sourceDirectory, "", SearchOption.AllDirectories);
        using (FileStream zipFileToOpen = new FileStream(fileOut, FileMode.OpenOrCreate))
        {
            using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Update))
            {
                foreach (var file in allFiles)
                {
                    //獲取壓縮文件相對目錄
                    string fileName = file.Replace(sourceDirectory + Path.DirectorySeparatorChar, "");
                    ZipFile(file, fileName, archive);
                }
            }
        }
    }

    /// <summary>
    /// 解壓文件到指定目錄
    /// </summary>
    /// <param name="upZipDirPath"></param>
    /// <param name="zipPath"></param>
    public static void UnZip(string upZipDirPath, string zipPath)
    {
        if (!Directory.Exists(upZipDirPath))
            Directory.CreateDirectory(upZipDirPath);
        using (FileStream zipFileToOpen = new FileStream(zipPath, FileMode.Open))
        {
            using (ZipArchive archive = new ZipArchive(zipFileToOpen, ZipArchiveMode.Read))
            {
                archive.ExtractToDirectory(upZipDirPath);
            }
        }
    }

    /// <summary>
    /// 生成壓縮文件
    /// </summary>
    /// <param name="fileSource">源文件</param>
    /// <param name="fileName">壓縮文件相對目錄</param>
    /// <param name="archive">壓縮文件包</param>
    private static void ZipFile(string fileSource, string fileName, ZipArchive archive)
    {
        ZipArchiveEntry readMeEntry = archive.CreateEntry(fileName);
        readMeEntry.LastWriteTime = File.GetLastWriteTime(fileSource);
        using (Stream stream = readMeEntry.Open())
        {
            byte[] bytes = File.ReadAllBytes(fileSource);
            stream.Write(bytes, 0, bytes.Length);
        }
    }
}

到此這篇關于.Net 生成壓縮文件問題記錄(推薦)的文章就介紹到這了,更多相關.Net 壓縮文件內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: