欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

在Mybatis中association標簽多層嵌套的問題

 更新時間:2022年03月10日 15:00:47   作者:-半夜微涼。  
這篇文章主要介紹了在Mybatis中association標簽多層嵌套的問題,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教

association標簽多層嵌套問題

mybatis里查詢使用嵌套association標簽時,發現內層的association查詢的結果一直為null

排查

  • 檢查sql執行情況,發現有數據返回,排除
  • 檢查property的值是否和pojo中的對應,值一致,排除
  • 檢查column的值是否和數據庫的相對應,相對應,排除

那么應該是mybatis沒有把數據映射到位了,經過排查是association中columnPrefix被不對應

<resultMap id="BaseResultMap" type="a.b.c.d.e">
? ? <id column="id" property="id" />
? ? <result property="workTime" column="work_time" />
? ? <result property="model" column="model" />
? ? <result property="status" column="status" />
? ? <association property="interfaceUpstream" javaType="interfaceUpstream" columnPrefix="ui_">
? ? ? <id column="id" property="id" />
? ? ? <result property="interfaceName" column="interface_name" />
? ? ? <result property="interfaceType" column="interface_type" />
? ? ? <result property="frequency" column="frequency" />
? ? ? <result property="address" column="address" />
? ? ? <result property="templateOrSql" column="template_or_sql" />
? ? ? <result property="status" column="status" />
? ? ? <association property="systemInfo" javaType="SystemInfo" columnPrefix="sys_">
? ? ? ? <id column="id" property="id"/>
? ? ? ? <result property="systemName" column="system_name"/>
? ? ? ? <result property="systemNameEN" column="system_name_en"/>
? ? ? ? <result property="belong" column="belong"/>
? ? ? ? <result property="status" column="status"/>
? ? ? </association>
? ? ? <association property="serverInfo" javaType="ServerInfo" columnPrefix="ser_">
? ? ? ? <id column="id" property="id"/>
? ? ? ? <result property="ftpIp" column="ftp_ip"/>
? ? ? ? <result property="ftpPort" column="ftp_port"/>
? ? ? ? <result property="ftpAccount" column="ftp_account"/>
? ? ? ? <result property="ftpPassword" column="ftp_password"/>
? ? ? </association>
? ? </association>
? </resultMap>
<sql id="base_select">
? ? SELECT
?? ?ii.Id,
?? ?ii.model,
?? ?ii.status,
?? ?ii.work_time,
?? ?ui.id AS ui_id,
?? ?ui.interface_name AS ui_interface_name,
?? ?ui.interface_type AS ui_interface_type,
?? ?ui.frequency AS ui_frequency,
?? ?ui.address AS ui_address,
?? ?ui.template_or_sql AS ui_template_or_sql,
?? ?ui.status AS ui_status,
?? ?sys.id AS sys_id,
?? ?sys.system_name AS sys_system_name,
?? ?sys.system_name_en AS sys_system_name_en,
?? ?sys.belong AS sys_belong,
?? ?sys.status AS sys_status,
?? ?ser.id AS ser_id,
?? ?ser.ftp_ip AS ser_ftp_ip,
?? ?ser.ftp_port AS ser_ftp_port,
?? ?ser.ftp_account AS ser_ftp_account,
?? ?ser.ftp_password AS ser_ftp_password
? </sql>

從代碼上看沒有什么問題

原因是association在進行多層嵌套時,mybatis會將外層association的columnPrefix值與內層的進行并合,

如外層columnPrefix值位ui_, 內層為sys_, 那么在SQL中就不能這樣 sys.id AS sys_id 了,需要將ui_前綴加上,變成 sys.id AS ui_sys_id ,這樣mybatis在匹配的時候才會將數據映射到對應association上

正常代碼如下

SELECT
?? ?ii.Id,
?? ?ii.model,
?? ?ii.status,
?? ?ii.work_time,
?? ?ui.id AS ui_id,
?? ?ui.interface_name AS ui_interface_name,
?? ?ui.interface_type AS ui_interface_type,
?? ?ui.frequency AS ui_frequency,
?? ?ui.address AS ui_address,
?? ?ui.template_or_sql AS ui_template_or_sql,
?? ?ui.status AS ui_status,
?? ?sys.id AS ui_sys_id,
?? ?sys.system_name AS ui_sys_system_name,
?? ?sys.system_name_en AS ui_sys_system_name_en,
?? ?sys.belong AS ui_sys_belong,
?? ?sys.status AS ui_sys_status,
?? ?ser.id AS ui_ser_id,
?? ?ser.ftp_ip AS ui_ser_ftp_ip,
?? ?ser.ftp_port AS ui_ser_ftp_port,
?? ?ser.ftp_account AS ui_ser_ftp_account,
?? ?ser.ftp_password AS ui_ser_ftp_password

問題解決! 

association集合嵌套

學了一下mybatis的查詢返回值的集合嵌套,先查了查官網:

這個返回集合有什么用呢

舉個例子三張表

hr_job_department

hr_job_position

第三張表里在表示部門和職位的時候只用了上面兩張表的主鍵

但是查詢的時候,希望表示下面這樣的結果

所以返回值是不止一個對象,這樣就用到了集合嵌套

<resultMap id="userInfoMap" type="com.advancedc.hrsys.entity.UserInfo">
		<id column="id" property="id" />
		<result column="name" property="name" />
		<result column="gender" property="gender" />
		<result column="id_card" property="idCard" />
		<result column="is_married" property="isMarried" />
		<result column="phone" property="phone" />
		<result column="priority" property="priority" />
		<result column="entry_time" property="entryTime" />
		<result column="full_time" property="fullTime" />
		<result column="created_time" property="createdTime" />
		<result column="edited_time" property="editedTime" />
		<association property="jobDepartment" column="id"
			javaType="com.advancedc.hrsys.entity.JobDepartment">
			<id column="jdid" property="id" />
			<result column="jdname" property="name" />
		</association>
		<association property="jobPosition" column="id"
			javaType="com.advancedc.hrsys.entity.JobPosition">
			<id column="jpid" property="id" />
			<result column="jpname" property="name" />
		</association>
	</resultMap>

只需要知道:

(1)column表示數據庫字段

(2)property表示Java里的值

而且我這里的主鍵都是id所以會出現重名的情況,在SQL語句里,查詢時就要賦予別名才能加以區分,返回結果resultMap就如上圖所示 

<select id="queryUserInfoBySomeone" resultMap="userInfoMap" resultType="com.advancedc.hrsys.entity.UserInfo">
		SELECT
		ui.id,
		ui.name,
		ui.gender,
		ui.id_card,
		ui.is_married,
		ui.department_id,
		ui.position_id,
		ui.phone,
		ui.priority,
		ui.entry_time,
		ui.full_time,
		ui.created_time,
		ui.edited_time,
		jd.id jdid,
		jd.name jdname,
		jp.id jpid,
		jp.name jpname
		FROM
		hr_user_info ui
		INNER JOIN
		hr_job_department jd
		ON
		ui.department_id=jd.id
		INNER JOIN
		hr_job_position jp
		ON
		ui.position_id=jp.id
		<where>
			<if test="someone.id>0">
			and ui.id = #{someone.id}
			</if>
			<if test="someone.gender!=null">
			and ui.gender = #{someone.gender}
			</if>
			<if test="someone.name!=null">
			and ui.name = #{someone.name}
			</if>
			<if test="someone.idCard!=null">
			and ui.id_card = #{someone.idCard}
			</if>
			<if test="someone.isMarried!=null">
			and ui.is_married = #{someone.isMarried}
			</if>
			<if test="someone.jobDepartment!=null and someone.jobDepartment.id!=null">
			and ui.department_id = #{someone.jobDepartment.id}
			</if>
			<if test="someone.jobPosition!=null and someone.jobPosition.id!=null">
			and ui.position_id = #{someone.jonPosition.id}
			</if>
			<if test="someone.phone!=null">
			and ui.phone = #{someone.phone}
			</if>
			<if test="someone.entryTime!=null">
			and ui.entry_time = #{someone.entryTime}
			</if>
			<if test="someone.fullTime!=null">
			and ui.full_time = #{someone.fullTime}
			</if>
		</where>
	</select>

上圖用了INNER JOIN來查詢看上去挺簡潔的,有一種不簡潔的寫法如下,雖然也能得到結果,但是不知道性能對比如何

SELECT
		ui.id,
		ui.name,
		ui.gender,
		ui.id_card,
		ui.is_married,
		ui.department_id,
		ui.position_id,
		ui.phone,
		ui.priority,
		ui.entry_time,
		ui.full_time,
		ui.created_time,
		ui.edited_time,
		(select id jdid from hr_job_department jd where jd.id=ui.department_id) jdid,
		(select name jdname from hr_job_department jd where jd.id=ui.department_id) jdname,
		(select id jpid from hr_job_position jp where jp.id=ui.position_id) jpid,
		(select name jpname from hr_job_position jp where jp.id=ui.position_id) jpname
		FROM
		hr_user_info ui;

以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。

相關文章

  • Java實戰之城市多音字處理

    Java實戰之城市多音字處理

    這篇文章主要介紹了Java實戰之城市多音字處理,文中有非常詳細的代碼示例,對正在學習java的小伙伴們有非常好的幫助,需要的朋友可以參考下
    2021-04-04
  • 解決nacos的yml配置文件解析@開頭的值啟動報錯問題

    解決nacos的yml配置文件解析@開頭的值啟動報錯問題

    這篇文章主要介紹了解決nacos的yml配置文件解析@開頭的值啟動報錯問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
    2024-07-07
  • JAVA中的函數式接口Function和BiFunction詳解

    JAVA中的函數式接口Function和BiFunction詳解

    這篇文章主要介紹了JAVA中的函數式接口Function和BiFunction詳解,JDK的函數式接口都加上了@FunctionalInterface注解進行標識,但是無論是否加上該注解只要接口中只有一個抽象方法,都是函數式接口,需要的朋友可以參考下
    2024-01-01
  • sprintboot使用spring-security包,緩存內存與redis共存方式

    sprintboot使用spring-security包,緩存內存與redis共存方式

    這篇文章主要介紹了sprintboot使用spring-security包,緩存內存與redis共存方式,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教
    2021-10-10
  • Java實戰之圖書管理系統的實現

    Java實戰之圖書管理系統的實現

    這篇文章主要介紹了如何利用Java語言編寫一個圖書管理系統,文中采用的技術有Springboot、SpringMVC、MyBatis、ThymeLeaf 等,需要的可以參考一下
    2022-03-03
  • Java中如何將String轉JSONObject

    Java中如何將String轉JSONObject

    這篇文章主要介紹了Java中如何將String轉JSONObject,String類型轉JSONObject,下面有兩種方式可以進行轉換,本文結合實例代碼給大家介紹的非常詳細,需要的朋友可以參考下
    2023-05-05
  • Springboot?Filter中注入bean無效為null問題

    Springboot?Filter中注入bean無效為null問題

    這篇文章主要介紹了Springboot?Filter中注入bean無效為null問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
    2024-05-05
  • SpringBoot實現聯表查詢的代碼詳解

    SpringBoot實現聯表查詢的代碼詳解

    這篇文章主要介紹了SpringBoot中如何實現聯表查詢,文中通過代碼示例和圖文結合的方式講解的非常詳細,對大家的學習或工作有一定的幫助,需要的朋友可以參考下
    2024-05-05
  • Java8接口中引入default關鍵字的本質原因詳析

    Java8接口中引入default關鍵字的本質原因詳析

    Default方法是在java8中引入的關鍵字,也可稱為Virtual extension methods—虛擬擴展方法,這篇文章主要給大家介紹了關于Java8接口中引入default關鍵字的本質原因,需要的朋友可以參考下
    2022-01-01
  • SpringBoot事件發布和監聽詳解

    SpringBoot事件發布和監聽詳解

    今天去官網查看spring boot資料時,在特性中看見了系統的事件及監聽章節,所以下面這篇文章主要給大家介紹了關于SpringBoot事件發布和監聽的相關資料,文中通過實例代碼介紹的非常詳細,需要的朋友可以參考下
    2021-11-11

最新評論