欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Redis6搭建集群并在SpringBoot中使用RedisTemplate的實現

 更新時間:2022年04月28日 09:05:30   作者:玩代碼  
本文主要介紹了Redis6搭建集群并在SpringBoot中使用RedisTemplate,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下

原理  

Redis Cluster 一般由多個節點組成,節點數量至少為 6 個才能保證組成完整高可用的集群,其中三個為主節點,三個為從節點。三個主節點會分配槽,處理客戶端的命令請求,而從節點可用在主節點故障后,頂替主節點。 

如上圖所示,該集群中包含6個Redis節點3個主服務器3個從服務器,分別為M1,M2,M3,S1,S2,S3。除了主從 Redis 節點之間進行數據復制外,所有 Redis 節點之間采用 Gossip 協議進行通信,交換維護節點元數據信息。一般來說,主Redis節點會處理Clients的讀寫操作,而從節點只處理讀操作。

搭建集群

1.進入redis目錄中,打開redis.conf文件,注釋掉bind 127.0.0.1,bind自己服務器的IP。并將protected -mode yes改為no。daemonize 默認是no,需要改成yes,以守護進程運行。

 

2.分別創建6個conf文件對應不同的端口號,正常每個節點對應一臺服務器,為了方便測試本次使用一臺服務來搭建集群模式。

redis6379.conf

include redis.conf
pidfile /var/run/redis_6379.pid
port 6379
dbfilename dump6379.rdb
cluster-enabled yes
cluster-node-timeout 15000
cluster-config-file nodes-6379.conf 

redis6380.conf

include redis.conf
pidfile /var/run/redis_6380.pid
port 6380
dbfilename dump6380.rdb
cluster-enabled yes
cluster-node-timeout 15000
cluster-config-file nodes-6380.conf

redis6381.conf

include redis.conf
pidfile /var/run/redis_6381.pid
port 6381
dbfilename dump6381.rdb
cluster-enabled yes
cluster-node-timeout 15000
cluster-config-file nodes-6381.conf 

redis6389.conf 

include redis.conf
pidfile /var/run/redis_6389.pid
port 6389
dbfilename dump6389.rdb
cluster-enabled yes
cluster-node-timeout 15000
cluster-config-file nodes-6389.conf 

redis6390.conf

include redis.conf
pidfile /var/run/redis_6390.pid
port 6390
dbfilename dump6390.rdb
cluster-enabled yes
cluster-node-timeout 15000
cluster-config-file nodes-6390.conf 

redis6391.conf

include redis.conf
pidfile /var/run/redis_6391.pid
port 6391
dbfilename dump6391.rdb
cluster-enabled yes
cluster-node-timeout 15000
cluster-config-file nodes-6391.conf 

3.進入到redis安裝目錄啟動redis服務(如之前有nodes、rdb、aof文件請先刪除,非則可能會報錯)。

 

 

4.進入src目錄中執行如下命令搭建集群。

redis-cli --cluster create --cluster-replicas 1 IP:6379 IP:6380 IP:6381 IP:6389 IP:6390 IP:6391

5.進入其中任意一個節點,執行命令查看當前節點狀態

redis-cli - h ip -p 端口info replication

SpringBoot中使用RedisTemplate

1.pom文件中加入依賴。

<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-data-redis</artifactId>
</dependency>

2.創建redis配置類.

package com.wzy.demo.config;
 
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.data.redis.core.RedisTemplate;
import org.springframework.data.redis.serializer.GenericJackson2JsonRedisSerializer;
import org.springframework.data.redis.serializer.StringRedisSerializer;
 
@Configuration
public class RedisConfig {
 
    @Autowired
    private RedisTemplate redisTemplate;
 
    /**
     * 解決redis插入中文亂碼
     * @return
     */
    @Bean
    public RedisTemplate redisTemplateInit() {
        //設置序列化Key的實例化對象
        redisTemplate.setKeySerializer(new StringRedisSerializer());
        //設置序列化Value的實例化對象
        redisTemplate.setValueSerializer(new GenericJackson2JsonRedisSerializer());
        return redisTemplate;
    }
 
}

3.創建RedisUtil工具類

package com.wzy.demo.util;
 
import java.util.List;
import java.util.Map;
import java.util.Set;
import java.util.concurrent.TimeUnit;
import org.springframework.data.redis.core.RedisTemplate;
import org.springframework.stereotype.Component;
import org.springframework.util.CollectionUtils;
import javax.annotation.Resource;
 
@Component
public class RedisUtil {
    @Resource
    private RedisTemplate<String, Object> redisTemplate;
 
    public void setRedisTemplate(RedisTemplate<String, Object> redisTemplate) {
        this.redisTemplate = redisTemplate;
    }
    //=============================common============================
 
    /**
     * 指定緩存失效時間
     *
     * @param key  鍵
     * @param time 時間(秒)
     * @return
     */
    public boolean expire(String key, long time) {
        try {
            if (time > 0) {
                redisTemplate.expire(key, time, TimeUnit.SECONDS);
            }
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 根據key 獲取過期時間
     *
     * @param key 鍵 不能為null
     * @return 時間(秒) 返回0代表為永久有效
     */
    public long getExpire(String key) {
        return redisTemplate.getExpire(key, TimeUnit.SECONDS);
    }
 
    /**
     * 判斷key是否存在
     *
     * @param key 鍵
     * @return true 存在 false不存在
     */
    public boolean hasKey(String key) {
        try {
            return redisTemplate.hasKey(key);
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 刪除緩存
     *
     * @param key 可以傳一個值 或多個
     */
    @SuppressWarnings("unchecked")
    public void del(String... key) {
        if (key != null && key.length > 0) {
            if (key.length == 1) {
                redisTemplate.delete(key[0]);
            } else {
                redisTemplate.delete(CollectionUtils.arrayToList(key));
            }
        }
    }
 
    //============================String=============================
 
    /**
     * 普通緩存獲取
     *
     * @param key 鍵
     * @return 值
     */
    public Object get(String key) {
        return key == null ? null : redisTemplate.opsForValue().get(key);
    }
 
    /**
     * 普通緩存放入
     *
     * @param key   鍵
     * @param value 值
     * @return true成功 false失敗
     */
    public boolean set(String key, Object value) {
        try {
            redisTemplate.opsForValue().set(key, value);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
 
    }
 
    /**
     * 普通緩存放入并設置時間
     *
     * @param key   鍵
     * @param value 值
     * @param time  時間(秒) time要大于0 如果time小于等于0 將設置無限期
     * @return true成功 false 失敗
     */
    public boolean set(String key, Object value, long time) {
        try {
            if (time > 0) {
                redisTemplate.opsForValue().set(key, value, time, TimeUnit.SECONDS);
            } else {
                set(key, value);
            }
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 遞增
     *
     * @param key 鍵
     * @param delta  要增加幾(大于0)
     * @return
     */
    public long incr(String key, long delta) {
        if (delta < 0) {
            throw new RuntimeException("遞增因子必須大于0");
        }
        return redisTemplate.opsForValue().increment(key, delta);
    }
 
    /**
     * 遞減
     *
     * @param key 鍵
     * @param delta  要減少幾(小于0)
     * @return
     */
    public long decr(String key, long delta) {
        if (delta < 0) {
            throw new RuntimeException("遞減因子必須大于0");
        }
        return redisTemplate.opsForValue().increment(key, -delta);
    }
 
    //================================Map=================================
 
    /**
     * HashGet
     *
     * @param key  鍵 不能為null
     * @param item 項 不能為null
     * @return 值
     */
    public Object hget(String key, String item) {
        return redisTemplate.opsForHash().get(key, item);
    }
 
    /**
     * 獲取hashKey對應的所有鍵值
     *
     * @param key 鍵
     * @return 對應的多個鍵值
     */
    public Map<Object, Object> hmget(String key) {
        return redisTemplate.opsForHash().entries(key);
    }
 
    /**
     * HashSet
     *
     * @param key 鍵
     * @param map 對應多個鍵值
     * @return true 成功 false 失敗
     */
    public boolean hmset(String key, Map<String, Object> map) {
        try {
            redisTemplate.opsForHash().putAll(key, map);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * HashSet 并設置時間
     *
     * @param key  鍵
     * @param map  對應多個鍵值
     * @param time 時間(秒)
     * @return true成功 false失敗
     */
    public boolean hmset(String key, Map<String, Object> map, long time) {
        try {
            redisTemplate.opsForHash().putAll(key, map);
            if (time > 0) {
                expire(key, time);
            }
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 向一張hash表中放入數據,如果不存在將創建
     *
     * @param key   鍵
     * @param item  項
     * @param value 值
     * @return true 成功 false失敗
     */
    public boolean hset(String key, String item, Object value) {
        try {
            redisTemplate.opsForHash().put(key, item, value);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 向一張hash表中放入數據,如果不存在將創建
     *
     * @param key   鍵
     * @param item  項
     * @param value 值
     * @param time  時間(秒)  注意:如果已存在的hash表有時間,這里將會替換原有的時間
     * @return true 成功 false失敗
     */
    public boolean hset(String key, String item, Object value, long time) {
        try {
            redisTemplate.opsForHash().put(key, item, value);
            if (time > 0) {
                expire(key, time);
            }
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 刪除hash表中的值
     *
     * @param key  鍵 不能為null
     * @param item 項 可以使多個 不能為null
     */
    public void hdel(String key, Object... item) {
        redisTemplate.opsForHash().delete(key, item);
    }
 
    /**
     * 判斷hash表中是否有該項的值
     *
     * @param key  鍵 不能為null
     * @param item 項 不能為null
     * @return true 存在 false不存在
     */
    public boolean hHasKey(String key, String item) {
        return redisTemplate.opsForHash().hasKey(key, item);
    }
 
    /**
     * hash遞增 如果不存在,就會創建一個 并把新增后的值返回
     *
     * @param key  鍵
     * @param item 項
     * @param by   要增加幾(大于0)
     * @return
     */
    public double hincr(String key, String item, double by) {
        return redisTemplate.opsForHash().increment(key, item, by);
    }
 
    /**
     * hash遞減
     *
     * @param key  鍵
     * @param item 項
     * @param by   要減少記(小于0)
     * @return
     */
    public double hdecr(String key, String item, double by) {
        return redisTemplate.opsForHash().increment(key, item, -by);
    }
 
    //============================set=============================
 
    /**
     * 根據key獲取Set中的所有值
     *
     * @param key 鍵
     * @return
     */
    public Set<Object> sGet(String key) {
        try {
            return redisTemplate.opsForSet().members(key);
        } catch (Exception e) {
            e.printStackTrace();
            return null;
        }
    }
 
    /**
     * 根據value從一個set中查詢,是否存在
     *
     * @param key   鍵
     * @param value 值
     * @return true 存在 false不存在
     */
    public boolean sHasKey(String key, Object value) {
        try {
            return redisTemplate.opsForSet().isMember(key, value);
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 將數據放入set緩存
     *
     * @param key    鍵
     * @param values 值 可以是多個
     * @return 成功個數
     */
    public long sSet(String key, Object... values) {
        try {
            return redisTemplate.opsForSet().add(key, values);
        } catch (Exception e) {
            e.printStackTrace();
            return 0;
        }
    }
 
    /**
     * 將set數據放入緩存
     *
     * @param key    鍵
     * @param time   時間(秒)
     * @param values 值 可以是多個
     * @return 成功個數
     */
    public long sSetAndTime(String key, long time, Object... values) {
        try {
            Long count = redisTemplate.opsForSet().add(key, values);
            if (time > 0) expire(key, time);
            return count;
        } catch (Exception e) {
            e.printStackTrace();
            return 0;
        }
    }
 
    /**
     * 獲取set緩存的長度
     *
     * @param key 鍵
     * @return
     */
    public long sGetSetSize(String key) {
        try {
            return redisTemplate.opsForSet().size(key);
        } catch (Exception e) {
            e.printStackTrace();
            return 0;
        }
    }
 
    /**
     * 移除值為value的
     *
     * @param key    鍵
     * @param values 值 可以是多個
     * @return 移除的個數
     */
    public long setRemove(String key, Object... values) {
        try {
            Long count = redisTemplate.opsForSet().remove(key, values);
            return count;
        } catch (Exception e) {
            e.printStackTrace();
            return 0;
        }
    }
    //===============================list=================================
 
    /**
     * 獲取list緩存的內容
     *
     * @param key   鍵
     * @param start 開始
     * @param end   結束  0 到 -1代表所有值
     * @return
     */
    public List<Object> lGet(String key, long start, long end) {
        try {
            return redisTemplate.opsForList().range(key, start, end);
        } catch (Exception e) {
            e.printStackTrace();
            return null;
        }
    }
 
    /**
     * 獲取list緩存的長度
     *
     * @param key 鍵
     * @return
     */
    public long lGetListSize(String key) {
        try {
            return redisTemplate.opsForList().size(key);
        } catch (Exception e) {
            e.printStackTrace();
            return 0;
        }
    }
 
    /**
     * 通過索引 獲取list中的值
     *
     * @param key   鍵
     * @param index 索引  index>=0時, 0 表頭,1 第二個元素,依次類推;index<0時,-1,表尾,-2倒數第二個元素,依次類推
     * @return
     */
    public Object lGetIndex(String key, long index) {
        try {
            return redisTemplate.opsForList().index(key, index);
        } catch (Exception e) {
            e.printStackTrace();
            return null;
        }
    }
 
    /**
     * 將list放入緩存
     *
     * @param key   鍵
     * @param value 值
     * @return
     */
    public boolean lSet(String key, Object value) {
        try {
            redisTemplate.opsForList().rightPush(key, value);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 將list放入緩存
     *
     * @param key   鍵
     * @param value 值
     * @param time  時間(秒)
     * @return
     */
    public boolean lSet(String key, Object value, long time) {
        try {
            redisTemplate.opsForList().rightPush(key, value);
            if (time > 0) expire(key, time);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 將list放入緩存
     *
     * @param key   鍵
     * @param value 值
     * @return
     */
    public boolean lSet(String key, List<Object> value) {
        try {
            redisTemplate.opsForList().rightPushAll(key, value);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 將list放入緩存
     *
     * @param key   鍵
     * @param value 值
     * @param time  時間(秒)
     * @return
     */
    public boolean lSet(String key, List<Object> value, long time) {
        try {
            redisTemplate.opsForList().rightPushAll(key, value);
            if (time > 0) expire(key, time);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 根據索引修改list中的某條數據
     *
     * @param key   鍵
     * @param index 索引
     * @param value 值
     * @return
     */
    public boolean lUpdateIndex(String key, long index, Object value) {
        try {
            redisTemplate.opsForList().set(key, index, value);
            return true;
        } catch (Exception e) {
            e.printStackTrace();
            return false;
        }
    }
 
    /**
     * 移除N個值為value
     *
     * @param key   鍵
     * @param count 移除多少個
     * @param value 值
     * @return 移除的個數
     */
    public long lRemove(String key, long count, Object value) {
        try {
            Long remove = redisTemplate.opsForList().remove(key, count, value);
            return remove;
        } catch (Exception e) {
            e.printStackTrace();
            return 0;
        }
    }
}

4.在controller中測試redis。

@RequestMapping("/testRedis")
    public String testRedis(Model model) throws Exception{
    redisUtil.set("myid","123456");
    Object object = redisUtil.get("myid");
    model.addAttribute("redisKey",String.valueOf(object));
    return "redis.html";
}

5.頁面中顯示redis的返回結果。

到此這篇關于Redis6搭建集群并在SpringBoot中使用RedisTemplate的實現的文章就介紹到這了,更多相關SpringBoot使用RedisTemplate內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

  • Springboot前后端分離項目配置跨域?qū)崿F(xiàn)過程解析

    Springboot前后端分離項目配置跨域?qū)崿F(xiàn)過程解析

    這篇文章主要介紹了Springboot前后端分離項目配置跨域?qū)崿F(xiàn)過程解析,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
    2020-08-08
  • java原碼補碼反碼關系解析

    java原碼補碼反碼關系解析

    這篇文章主要為大家詳細介紹了java原碼補碼反碼的關系,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2020-02-02
  • Spring整合Mybatis實操分享

    Spring整合Mybatis實操分享

    這篇文章主要介紹了Spring整合Mybatis實操分享,文章首先通過介紹Mybatis的工作原理展開Spring整合Mybatis的詳細內容,需要的小伙伴可以參考一下
    2022-04-04
  • Java中避免寫嵌套if樣式的代碼詳解

    Java中避免寫嵌套if樣式的代碼詳解

    這篇文章主要給大家介紹了在Java中如何避免寫嵌套if樣式的相關資料,文中通過示例代碼介紹的非常詳細,對大家具有一定的參考學習價值,需要的朋友們下面跟著小編一起來學習學習吧。
    2017-07-07
  • 解決啟用 Spring-Cloud-OpenFeign 配置可刷新項目無法啟動的問題

    解決啟用 Spring-Cloud-OpenFeign 配置可刷新項目無法啟動的問題

    這篇文章主要介紹了解決啟用 Spring-Cloud-OpenFeign 配置可刷新項目無法啟動的問題,本文重點給大家介紹Spring-Cloud-OpenFeign的原理及問題解決方法,需要的朋友可以參考下
    2021-10-10
  • springboot項目攔截器重定向循環問題的解決

    springboot項目攔截器重定向循環問題的解決

    這篇文章主要介紹了springboot項目攔截器重定向循環問題的解決,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教
    2021-09-09
  • feign參數過多導致調用失敗的解決方案

    feign參數過多導致調用失敗的解決方案

    這篇文章主要介紹了feign參數過多導致調用失敗的解決方案,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教
    2022-03-03
  • Java攔截器Interceptor實現原理及代碼示例

    Java攔截器Interceptor實現原理及代碼示例

    本文詳細講解了Java攔截器Interceptor實現原理及代碼示例,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
    2021-12-12
  • Guava范圍類Range方法實例深入解析

    Guava范圍類Range方法實例深入解析

    這篇文章主要為大家介紹了Guava范圍類Range方法實例深入解析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪
    2023-12-12
  • HttpClient實現表單提交上傳文件

    HttpClient實現表單提交上傳文件

    這篇文章主要為大家詳細介紹了HttpClient實現表單提交上傳文件,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2022-08-08

最新評論