Android自定義帶有圓形進度條的可長按控件功能
更新時間：2022年06月15日 16:41:42 作者：移動端開發_小黑
這篇文章主要介紹了Android自定義帶有圓形進度條的可長按控件,思路很簡單，使用簡單的畫筆工具就可以完成這個控件，本文結合示例代碼給大家介紹的非常詳細，需要的朋友參考下吧
這幾天有在學習Jetpack中CameraX的內容，在拍攝視頻的時候想著做一個自定義帶有進度條的可長按控件，用來顯示拍攝進度，故記錄下來與大家分享！效果如下：
(篇幅過長是因?yàn)橛写a解析過程，可直接到最后查看完整代碼)
這個控件較為簡易，從效果中可以看出，控件模擬了單擊拍照，長按可以錄制視頻的功能，中途松手或者時間到都可以停止錄制
思路很簡單，使用簡單的畫筆工具就可以完成這個控件
- 繼承自View
- 定義自定義屬性并獲取
- 定義填充樣式的畫筆
- onMeasure中測量大小，onDraw中繪制圓與扇形
- 監聽長按監聽開始定時器并刷新畫布，監聽觸摸事件進行結束的回調
以上就是全部的思路了，代碼拆解如下：
（一）繼承自View并實現構造方法，代碼如下：
public class LongClickView extends View {
public int DEFAULT_MAX_SECONDS = 15;
public int DEFAULT_ANNULUS_WIDTH = 5;
public int DEFAULT_ANNULUS_COLOR;
public int DEFAULT_RATE = 50;
private Paint mSmallCirclePaint;
private Paint mMiddenCirclePaint;
private Paint mBigCirclePaint;
private Paint mAngleCirclePaint;
private int mWidthSize;
private Timer mTimer;//計時器
private AtomicInteger mCount = new AtomicInteger(0);
private MyClickListener mMyClickListener;
private boolean mIsFinish = true;
private long mStartTime;//點擊的時間
private long mEndTime;//點擊結束的時間
private int mMaxSeconds;
private int mDelayMilliseconds;
private int mAnnulusColor;
private float mAnnulusWidth;
public interface MyClickListener {
void longClickFinish();//長按結束
void singleClickFinish();//單擊結束
}
public void setMyClickListener(MyClickListener myClickListener) {
mMyClickListener = myClickListener;
}
public LongClickView(Context context) {
this(context, null);
}
public LongClickView(Context context, @Nullable AttributeSet attrs) {
this(context, attrs, 0);
}
public LongClickView(Context context, @Nullable AttributeSet attrs, int defStyleAttr) {
super(context, attrs, defStyleAttr);
getAttrs(context, attrs);
initView();
}
}（二）定義并獲取自定義屬性，屬性以及獲取屬性代碼如下：
attr_long_click_view.xml
<?xml version="1.0" encoding="utf-8"?>
<resources>
<declare-styleable name="LongClickView">
<attr name="maxSeconds" format="integer" />
<attr name="annulusWidth" format="integer" />
<attr name="annulusColor" format="color" />
<attr name="delayMilliseconds" format="integer" />
</declare-styleable>
</resources> private void getAttrs(Context context, @Nullable AttributeSet attrs) {
TypedArray typedArray = context.obtainStyledAttributes(attrs, R.styleable.LongClickView);
//maxSeconds 最大的秒數
mMaxSeconds = typedArray.getInt(R.styleable.LongClickView_maxSeconds, DEFAULT_MAX_SECONDS);
//annulusWidth 圓環的寬度
mAnnulusWidth = typedArray.getInt(R.styleable.LongClickView_annulusWidth, DEFAULT_ANNULUS_WIDTH);
//annulusColor 圓環的顏色
DEFAULT_ANNULUS_COLOR = context.getResources().getColor(R.color.color_grey);
mAnnulusColor = typedArray.getColor(R.styleable.LongClickView_annulusColor, DEFAULT_ANNULUS_COLOR);
//delayMilliseconds 進度條隔多少時間走一次,值越小走的越快，顯得更流暢
mDelayMilliseconds = typedArray.getInt(R.styleable.LongClickView_delayMilliseconds, DEFAULT_RATE);
}(三)定義畫筆工具 的代碼如下:
private void initView() {
mBigCirclePaint = new Paint();
mSmallCirclePaint = new Paint();
mMiddenCirclePaint = new Paint();
mAngleCirclePaint = new Paint();
mBigCirclePaint.setStyle(Paint.Style.FILL);
mBigCirclePaint.setColor(Color.LTGRAY);
mBigCirclePaint.setAntiAlias(true);
mBigCirclePaint.setStrokeWidth(5);
mSmallCirclePaint.setStrokeWidth(5);
mSmallCirclePaint.setAntiAlias(true);
mSmallCirclePaint.setColor(Color.WHITE);
mSmallCirclePaint.setStyle(Paint.Style.FILL);
mMiddenCirclePaint.setStrokeWidth(5);
mMiddenCirclePaint.setAntiAlias(true);
mMiddenCirclePaint.setColor(Color.LTGRAY);
mMiddenCirclePaint.setStyle(Paint.Style.FILL);
mAngleCirclePaint.setStrokeWidth(5);
mAngleCirclePaint.setAntiAlias(true);
mAngleCirclePaint.setColor(mAnnulusColor);
mAngleCirclePaint.setStyle(Paint.Style.FILL);
...//這里是長按監聽
}(四)onMeasure中測量大小，onDraw中繪制圓與扇形，代碼如下：
onMeasure中，如果沒有定義實際寬高就會使用父組件的寬高，如果有實際寬高便會使用自己的寬高
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
mWidthSize = MeasureSpec.getSize(widthMeasureSpec);
setMeasuredDimension(mWidthSize, mWidthSize);
}onDraw中，一共有三層圓形填充繪制以及一層扇形填充繪制，先繪制最外層的灰色圓形，再根據此時的進度繪制一定角度的扇形，然后覆蓋一層灰色的圓形，最后在覆蓋上一層白色的中心圓，并且在繪制過程以及繪制結束時的中心圓半徑不同。代碼如下：
@Override
protected void onDraw(Canvas canvas) {
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 2, mBigCirclePaint);//最外層的填充圓
RectF rectF = new RectF(0, 0, mWidthSize, mWidthSize);//進度扇形
if (mCount.get() > 0) {
//求出每一次定時器執行所繪制的扇形度數
float perAngle = 360f / mMaxSeconds / (1000f / mDelayMilliseconds);
canvas.drawArc(rectF, 0, perAngle * mCount.get(), true, mAngleCirclePaint);
}
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 2 - mAnnulusWidth, mMiddenCirclePaint);//中間一層灰色的圓
//最后繪制中心圓
if (mIsFinish) {
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 2 - mAnnulusWidth, mSmallCirclePaint);
} else {
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 8, mSmallCirclePaint);
}
super.onDraw(canvas);
}（五）監聽長按監聽開始定時器并刷新畫布，監聽觸摸事件進行結束的回調，定時器使用的是Timer類，當時間超過自定義的最大秒數時就會自動停止，并定時刷新畫布,代碼如下:
this.setOnLongClickListener(new OnLongClickListener() {
@Override
public boolean onLongClick(View v) {
mIsFinish = false;
mCount.set(0);
mTimer = new Timer();
mTimer.schedule(new TimerTask() {
@Override
public void run() {
mCount.addAndGet(1);
invalidate();
if (mCount.get() * mDelayMilliseconds >= mMaxSeconds * 1000) {
mCount.set(0);
this.cancel();
invalidate();
mIsFinish = true;
if (mMyClickListener != null) {
mMyClickListener.longClickFinish();
}
}
}
}, 0, mDelayMilliseconds);
return true;
}
}); @Override
public boolean onTouchEvent(MotionEvent event) {
if (event.getAction() == MotionEvent.ACTION_UP) {
mEndTime = System.currentTimeMillis();
new MyAsyncTask().execute();
} else if (event.getAction() == MotionEvent.ACTION_DOWN) {
mStartTime = System.currentTimeMillis();
}
return super.onTouchEvent(event);
}將定時器停止與停止后的判斷邏輯放在AsyncTask中編寫，確保定時器不會繼續處理邏輯之后再做判斷
public class MyAsyncTask extends AsyncTask<Void, Void, Void> {
@Override
protected Void doInBackground(Void... voids) {
if (mTimer != null) {
mTimer.cancel();
}
return null;
}
@Override
protected void onPostExecute(Void aVoid) {
//使用時間戳的差來判斷是單擊或者長按
if (mEndTime - mStartTime > 1000) {
//防止在自動結束后松開手指又重新調用了一次長按結束的回調
if (!mIsFinish) {
if (mMyClickListener != null) {
mMyClickListener.longClickFinish();
}
}
} else {
//若是單擊就清除進度條
mCount.set(0);
invalidate();
if (mMyClickListener != null) {
mMyClickListener.singleClickFinish();
}
}
mIsFinish = true;
}
}
結束后的回調類代碼如下:
public interface MyClickListener {
void longClickFinish();//長按結束
void singleClickFinish();//單擊結束
}最后，完整的代碼如下，自定義屬性上方有貼出來代碼：
public class LongClickView extends View {
public int DEFAULT_MAX_SECONDS = 15;
public int DEFAULT_ANNULUS_WIDTH = 5;
public int DEFAULT_ANNULUS_COLOR;
public int DEFAULT_RATE = 50;
private Paint mSmallCirclePaint;
private Paint mMiddenCirclePaint;
private Paint mBigCirclePaint;
private Paint mAngleCirclePaint;
private int mWidthSize;
private Timer mTimer;//計時器
private AtomicInteger mCount = new AtomicInteger(0);
private MyClickListener mMyClickListener;
private boolean mIsFinish = true;
private long mStartTime;//點擊的時間
private long mEndTime;//點擊結束的時間
private int mMaxSeconds;
private int mDelayMilliseconds;
private int mAnnulusColor;
private float mAnnulusWidth;
public interface MyClickListener {
void longClickFinish();//長按結束
void singleClickFinish();//單擊結束
}
public void setMyClickListener(MyClickListener myClickListener) {
mMyClickListener = myClickListener;
}
public LongClickView(Context context) {
this(context, null);
}
public LongClickView(Context context, @Nullable AttributeSet attrs) {
this(context, attrs, 0);
}
public LongClickView(Context context, @Nullable AttributeSet attrs, int defStyleAttr) {
super(context, attrs, defStyleAttr);
getAttrs(context, attrs);
initView();
}
private void getAttrs(Context context, @Nullable AttributeSet attrs) {
TypedArray typedArray = context.obtainStyledAttributes(attrs, R.styleable.LongClickView);
//maxSeconds 最大的秒數
mMaxSeconds = typedArray.getInt(R.styleable.LongClickView_maxSeconds, DEFAULT_MAX_SECONDS);
//annulusWidth 圓環的寬度
mAnnulusWidth = typedArray.getInt(R.styleable.LongClickView_annulusWidth, DEFAULT_ANNULUS_WIDTH);
//annulusColor 圓環的顏色
DEFAULT_ANNULUS_COLOR = context.getResources().getColor(R.color.color_grey);
mAnnulusColor = typedArray.getColor(R.styleable.LongClickView_annulusColor, DEFAULT_ANNULUS_COLOR);
//delayMilliseconds 進度條隔多少時間走一次,值越小走的越快，顯得更流暢
mDelayMilliseconds = typedArray.getInt(R.styleable.LongClickView_delayMilliseconds, DEFAULT_RATE);
}
private static final String TAG = "LongClickView";
private void initView() {
mBigCirclePaint = new Paint();
mSmallCirclePaint = new Paint();
mMiddenCirclePaint = new Paint();
mAngleCirclePaint = new Paint();
mBigCirclePaint.setStyle(Paint.Style.FILL);
mBigCirclePaint.setColor(Color.LTGRAY);
mBigCirclePaint.setAntiAlias(true);
mBigCirclePaint.setStrokeWidth(5);
mSmallCirclePaint.setStrokeWidth(5);
mSmallCirclePaint.setAntiAlias(true);
mSmallCirclePaint.setColor(Color.WHITE);
mSmallCirclePaint.setStyle(Paint.Style.FILL);
mMiddenCirclePaint.setStrokeWidth(5);
mMiddenCirclePaint.setAntiAlias(true);
mMiddenCirclePaint.setColor(Color.LTGRAY);
mMiddenCirclePaint.setStyle(Paint.Style.FILL);
mAngleCirclePaint.setStrokeWidth(5);
mAngleCirclePaint.setAntiAlias(true);
mAngleCirclePaint.setColor(mAnnulusColor);
mAngleCirclePaint.setStyle(Paint.Style.FILL);
this.setOnLongClickListener(new OnLongClickListener() {
@Override
public boolean onLongClick(View v) {
mIsFinish = false;
mCount.set(0);
mTimer = new Timer();
mTimer.schedule(new TimerTask() {
@Override
public void run() {
mCount.addAndGet(1);
invalidate();
if (mCount.get() * mDelayMilliseconds >= mMaxSeconds * 1000) {
mCount.set(0);
this.cancel();
invalidate();
mIsFinish = true;
if (mMyClickListener != null) {
mMyClickListener.longClickFinish();
}
}
}
}, 0, mDelayMilliseconds);
return true;
}
});
}
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
mWidthSize = MeasureSpec.getSize(widthMeasureSpec);
setMeasuredDimension(mWidthSize, mWidthSize);
}
@Override
protected void onDraw(Canvas canvas) {
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 2, mBigCirclePaint);//最外層的填充圓
RectF rectF = new RectF(0, 0, mWidthSize, mWidthSize);//進度扇形
if (mCount.get() > 0) {
//求出每一次定時器執行所繪制的扇形度數
float perAngle = 360f / mMaxSeconds / (1000f / mDelayMilliseconds);
canvas.drawArc(rectF, 0, perAngle * mCount.get(), true, mAngleCirclePaint);
}
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 2 - mAnnulusWidth, mMiddenCirclePaint);//中間一層灰色的圓
//最后繪制中心圓
if (mIsFinish) {
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 2 - mAnnulusWidth, mSmallCirclePaint);
} else {
canvas.drawCircle(mWidthSize / 2, mWidthSize / 2, mWidthSize / 8, mSmallCirclePaint);
}
super.onDraw(canvas);
}
@Override
public boolean onTouchEvent(MotionEvent event) {
if (event.getAction() == MotionEvent.ACTION_UP) {
mEndTime = System.currentTimeMillis();
new MyAsyncTask().execute();
} else if (event.getAction() == MotionEvent.ACTION_DOWN) {
mStartTime = System.currentTimeMillis();
}
return super.onTouchEvent(event);
}
public class MyAsyncTask extends AsyncTask<Void, Void, Void> {
@Override
protected Void doInBackground(Void... voids) {
if (mTimer != null) {
mTimer.cancel();
}
return null;
}
@Override
protected void onPostExecute(Void aVoid) {
//使用時間戳的差來判斷是單擊或者長按
if (mEndTime - mStartTime > 1000) {
//防止在結束后松開手指有重新調用了一次長按結束的回調
if (!mIsFinish) {
if (mMyClickListener != null) {
mMyClickListener.longClickFinish();
}
}
} else {
mCount.set(0);
invalidate();
if (mMyClickListener != null) {
mMyClickListener.singleClickFinish();
}
}
mIsFinish = true;
}
}
}使用的代碼如下：
activity_long_click_view.xml
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:app="http://schemas.android.com/apk/res-auto"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:gravity="center"
android:orientation="vertical">
<com.example.customerview.long_click_view.LongClickView
android:id="@+id/long_click_view"
android:layout_width="100dp"
android:layout_height="wrap_content"
app:annulusColor="@color/color_2196F3"
app:annulusWidth="20"
app:delayMilliseconds="40"
app:maxSeconds="4" />
<TextView
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_marginTop="20dp"
android:text="長按錄制視頻，單擊拍照"
android:textColor="@color/colorBlack"
android:textSize="20dp" />
</LinearLayout>LongClickViewActivity.java
mLongClickView.setMyClickListener(new LongClickView.MyClickListener() {
@Override
public void longClickFinish() {
runOnUiThread(new Runnable() {
@Override
public void run() {
Toast.makeText(LongClickViewActivity.this, "長按結束", Toast.LENGTH_SHORT).show();
}
});
}
@Override
public void singleClickFinish() {
runOnUiThread(new Runnable() {
@Override
public void run() {
Toast.makeText(LongClickViewActivity.this, "單擊結束", Toast.LENGTH_SHORT).show();
}
});
}
});到此這篇關于Android自定義帶有圓形進度條的可長按控件功能的文章就介紹到這了,更多相關Android圓形進度條內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Android多線程斷點續傳下載實現代碼
這篇文章主要介紹了Android多線程斷點續傳下載實現代碼,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-11-11
這篇文章主要介紹了Android 如何修改APK的默認名稱的相關資料,需要的朋友可以參考下2017-02-02
Android實現TextView中文字鏈接的4種方式介紹及代碼
Android實現TextView中文字鏈接的方式有很多種;總結起來大概有4種:用Spannable或?qū)崿F(xiàn)它的類，如SpannableString來格式，部分字符串等等，感興趣的你可以參考下2013-02-02
這篇文章主要介紹了Android自定義組件ListPopWindow的相關資料,需要的朋友可以參考下2016-01-01
這篇文章主要為大家詳細介紹了Android實現NFC讀取校園卡，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-09-09
Android Socket實現多個客戶端即時通信聊天
這篇文章主要為大家詳細介紹了Android Socket實現多個客戶端即時通信聊天，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2022-04-04
這篇文章主要介紹了超簡單的幾行代碼搞定Android底部導航欄功能,需要的朋友可以參考下2018-03-03
Android使用BottomNavigationBar實現底部導航欄
這篇文章主要為大家詳細介紹了Android使用BottomNavigationBar實現底部導航欄，具有一定的參考價值，感興趣的小伙伴們可以參考一下2019-02-02
android PopupWindow 和 Activity彈出窗口實現方式
本人小菜一個。目前只見過兩種彈出框的實現方式，第一種是最常見的PopupWindow，第二種也就是Activity的方式是前幾天才見識過,需要的朋友可以參考下2012-11-11
Jetpack?Compose對比React?Hooks?API相似度
這篇文章主要為大家介紹了Jetpack?Compose對比React?Hooks?API相似度，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-08-08