SpringCloud?hystrix斷路器與全局解耦全面介紹
第七章中在ProductController 和OrderController 中都使用了局部服務降級,但同時也導致兩個問題, 通過觀察兩個局部降級的案例,可以發現:
每個業務方法都對應一個降級方法,會導致代碼膨脹業務邏輯方法和處理服務異常降級方法混在一起。
業務邏輯方法和處理服務異常降級方法混在一起,不便于維護,為解決此問題,可以使用注解 @FeignClient(value = "PRODUCT-SERVICE",fallback = xxx.class)在調用遠端服務的接口上進行指定服務降級方法解耦,并實現調用遠端服務的接口的實現類,在實現類中統計管理服務降級解耦的方法。
進行全局解耦,以 訂單服務 OrderController 調用 商品服務ProductController 為案例,過程如下:
1、訂單服務 和 商品服務引入依賴
訂單服務引入依賴 openfegin , 商品服務分別引入依賴 Hystrix
2、清除OrderController 和 ProductController 所有降級方法
清除OrderController 所有降級方法
import com.hwadee.springcloud.entity.Product;
import com.hwadee.springcloud.service.IOrderFeignService;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.web.bind.annotation.PathVariable;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RestController;
@RestController
@RequestMapping("/order")
public class OrderController {
@Autowired
IOrderFeignService orderFeignService;
@RequestMapping("/buy/{id}")
public Product buy(@PathVariable Long id) {
System.out.println("進入OrderController的buy方法, orderFeignService 準備調用遠端接口 findById");
Product product = orderFeignService.findOrderById(id);
return product;
}
@RequestMapping(value = "/delete/{id}")
public Product deleteOrderById(@PathVariable Long id) {
System.out.println("進入OrderController的deleteOrderById方法, orderFeignService 準備調用遠端接口deleteOrderById");
Product product = orderFeignService.deleteOrderById(id);
return product;
}
}清除 ProductController 所有降級方法
注意,若有全局或者專屬降級可以自己增加。此處為方便演示,不使用全局或者專屬。
import com.hwadee.springcloud.entity.Product;
import org.springframework.beans.factory.annotation.Value;
import org.springframework.web.bind.annotation.PathVariable;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RestController;
import java.math.BigDecimal;
@RestController
@RequestMapping("/product")
public class ProductController {
//方便后面講負載均衡,查看ip,此處獲取配置中的端口號和ip
@Value("${server.port}")
private String port;
@Value("${spring.cloud.client.ip-address}")
private String ip;
@RequestMapping("/buy/{id}")
public Product findById(@PathVariable Long id) {
Product product = new Product();
product.setId(id);
// 后面需要測試負載均衡,所以返回 ip 地址及端口號
product.setName("當前訪問服務地址:" + ip + ":" + port + " " + "查詢商品訂單,訂單號:" + id);
product.setPrice(new BigDecimal(10000.0));
System.out.println(product);
//測試超時熔斷
try {
Thread.sleep(5000);
//測試并發熔斷
//Thread.sleep(500);
} catch (InterruptedException e) {
e.printStackTrace();
}
return product;
}
@RequestMapping(value = "/delete/{id}")
public Product deleteOrderById(@PathVariable Long id) {
Product product = new Product();
product.setId(id);
// 后面需要測試負載均衡,所以返回 ip 地址及端口號
product.setName("當前訪問服務地址:" + ip + ":" + port + " " + "從購物車刪除訂單,訂單號:" + id);
product.setPrice(new BigDecimal(10000.0));
System.out.println(product);
//測試異常熔斷
System.out.println(10 / 0);
return product;
}
}2、定義Feign接口的實現類
因?yàn)橛唵畏?wù) OrderController中通過 接口IOrderFeignService和 注解@FeignClient 遠程調用商品服務ProductController,因此當訂單服務 OrderController出現超時或異常,可以通過訂單服務 OrderController中通過 接口IOrderFeignService的 實現類OrderFeignServiceFallBack 將務邏輯的處理方法 和 降級方法進行解耦。
import com.hwadee.springcloud.entity.Product;
import com.hwadee.springcloud.service.IOrderFeignService;
import org.springframework.stereotype.Component;
@Component
public class OrderFeignServiceFallBack implements IOrderFeignService {
@Override
public Product findOrderById(Long id) {
Product product = new Product();
product.setId(id);
product.setName("當前訂單服務訪問/order/buy/1 超時:"+id);
return product;
}
@Override
public Product deleteOrderById(Long id) {
Product product = new Product();
product.setId(id);
product.setName("當前訂單服務訪問/order/delete/1 10/0異常:"+id);
return product;
}
}3、修改IOrderFeignService代碼
在 接口IOrderFeignService的注解@FeignClient中指定服務解耦的類OrderFeignServiceFallBack 。
@Component // 讓 spring 可以識別,不加也行,但是在注入的時候 IDEA 會報錯,不會影響運行,但有條紅線讓自己不舒服
@FeignClient(value = "PRODUCT-SERVICE",fallback = OrderFeignServiceFallBack.class)
public interface IOrderFeignService {
@RequestMapping(value = "/product/buy/{id}")
Product findOrderById(@PathVariable Long id);
@RequestMapping(value = "/product/delete/{id}")
Product deleteOrderById(@PathVariable Long id);
}4、定義 訂單服務 和 商品服務主啟動類
由于訂單服務中引入的spring-cloud-starter-openfeign依賴中已經集成了feign-hystrix,有了對 Hystrix 的支持,所以不需要額外引入依賴項。如果需要開啟 訂單服務端的hystrix服務,只需要在訂單服務的配置文件配置feign-hystrix 進行激活Hystrix,無需在主啟動類中添加注解 @EnableHystrix 或 @EnableHystrix 來開啟Hystrix服務。訂單服務 和 商品服務主啟動類如下:
訂單服務主啟動類 OrderServerApplication
import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;
import org.springframework.cloud.netflix.eureka.EnableEurekaClient;
import org.springframework.cloud.openfeign.EnableFeignClients;
@SpringBootApplication
@EnableEurekaClient// 啟動 eureka 客戶端
@EnableFeignClients // 啟動 feign
public class OrderServerApplication {
public static void main(String[] args) {
SpringApplication.run(OrderServerApplication.class, args);
}
}商品服務主啟動類 ProductServerApplication
@SpringBootApplication
@EnableEurekaClient// 啟動 eureka 客戶端
public class ProductServerApplication {
public static void main(String[] args) {
SpringApplication.run(ProductServerApplication.class, args);
}
}4、開啟openfeign在調用服務過程中開啟hystrix支持
由于前面引入的spring-cloud-starter-openfeign依賴中已經集成了feign-hystrix,有了對 Hystrix 的支持,所以不需要額外引入依賴項。只需要在訂單服務的 application.yml 配置文件中開啟openfeign在調用服務過程中開啟hystrix支持。
server:
port: 9000
spring:
application:
name: order-service # 為當前訂單服務命名為 order-service# 配置eureka客戶端信息
eureka:
client:
service-url:
# 配置eureka客戶端服務order-service的注冊地址,與 eureka-server 中暴露地址要保持一致
defaultZone: http://localhost:8000/eureka/
instance:
prefer-ip-address: true # 是否使用 IP 地址注冊,默認 false
# instance-id: order-service # 實例 id,服務的唯一標識,會自動的找到order-service的ip和端口
instance-id: ${spring.cloud.client.ip-address}:${server.port} # 如果想在控制頁面看到服務地址與端口,可以將 instance-id 這樣配置feign:
hystrix:
enabled: true
5、修改訂單服務配置文件
由于訂單服務中引入的spring-cloud-starter-openfeign依賴中已經集成了feign-hystrix,有了對 Hystrix 的支持,所以不需要額外引入依賴項。如果需要開啟 訂單服務端的hystrix服務,只需要在訂單服務的配置文件配置feign-hystrix 進行激活Hystrix,修改application.yml如下:
server:
port: 9000
spring:
application:
name: order-service # 為當前訂單服務命名為 order-service# 配置eureka客戶端信息
eureka:
client:
service-url:
# 配置eureka客戶端服務order-service的注冊地址,與 eureka-server 中暴露地址要保持一致
defaultZone: http://localhost:8000/eureka/
instance:
prefer-ip-address: true # 是否使用 IP 地址注冊,默認 false
# instance-id: order-service # 實例 id,服務的唯一標識,會自動的找到order-service的ip和端口
instance-id: ${spring.cloud.client.ip-address}:${server.port} # 如果想在控制頁面看到服務地址與端口,可以將 instance-id 這樣配置feign:
hystrix:
enabled: true
6、進行測試
分別訪問 http://localhost:9000/order/buy/1 和 http://localhost:9000/order/delete/1 查看瀏覽器結果如下:


到此這篇關于SpringCloud hystrix斷路器與全局解耦全面介紹的文章就介紹到這了,更多相關SpringCloud hystrix斷路器內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
使用springboot單例模式與線程安全問題踩的坑
這篇文章主要介紹了使用springboot單例模式與線程安全問題踩的坑,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2021-08-08
Java設計模式之適配器模式簡介
這篇文章主要介紹了Java設計模式之適配器模式,需要的朋友可以參考下2014-07-07
springboot?使用clickhouse實時大數據分析引擎(使用方式)
這篇文章主要介紹了springboot?使用clickhouse實時大數據分析引擎的方法,本文通過實例代碼給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友參考下吧2022-02-02
對arraylist中元素進行排序?qū)嵗a
這篇文章主要介紹了對arraylist中元素進行排序?qū)嵗a,還是比較不錯的,這里分享給大家,供需要的朋友參考。2017-11-11
簡單了解spring cloud 網關服務
這篇文章主要介紹了簡單了解spring cloud 網關服務,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2019-10-10

