欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

C#游戲開發之實現華容道游戲

 更新時間:2023年01月04日 08:56:37   作者:芝麻粒兒  
這篇文章主要為大家詳細介紹了C#如何實現經典華容道游戲,文中的示例代碼講解詳細,對我們學習C#有一定的幫助,感興趣的小伙伴可以跟隨小編一起了解一下

實踐過程

效果

代碼

/**
 * https://zhima.blog.csdn.net/
 */
public partial class Form1 : Form
{
public Form1()
{
    InitializeComponent();
}

private Panel pl;//記錄選中的控件ID

private void Form1_Load(object sender, EventArgs e)
{
    //初始化時設置各個位置的可用狀態
    PlState[0, 0] = PlState[0, 1] = PlState[0, 2] = PlState[0, 3] =
        PlState[1, 0] = PlState[1, 1] = PlState[1, 2] = PlState[1, 3] =
        PlState[2, 0] = PlState[2, 1] = PlState[2, 2] = PlState[2, 3] =
        PlState[3, 0] = PlState[3, 1] = PlState[3, 2] = PlState[3, 3] =
        PlState[4, 0] = PlState[4, 3] = true;
}

//初始化各人物方格位置
private void button1_Click(object sender, EventArgs e)
{
    //設置各方格的初始圖片
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    //設置各方格的初始位置
    panel1.Location = position[0, 0];
    panel2.Location = position[0, 1];
    panel3.Location = position[0, 3];
    panel4.Location = position[2, 0];
    panel5.Location = position[2, 1];
    panel6.Location = position[2, 3];
    panel7.Location = position[3, 1];
    panel8.Location = position[3, 2];
    panel9.Location = position[4, 0];
    panel10.Location = position[4, 3];
    PlState[4, 0] = PlState[4, 3] = true;   //設置最后一行的首尾位置不可用
    PlState[4, 1] = PlState[4, 2] = false;  //設置最后一行的中間兩個位置可用
}

#region 趙云
private void panel1_Click(object sender, EventArgs e)
{
    //設置各方格圖片
    panel1.BackgroundImage = (Image)(Properties.Resources.a3);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P2V;//記錄方格樣式
    pl = panel1;         //記錄選中的控件ID
    PosX = intX(panel1); //記錄選中控件在坐標數組中的列索引
    PosY = intY(panel1); //記錄選中控件在坐標數組中的行索引
}
#endregion

#region 曹操
private void panel2_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources.a1);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P4;
    pl = panel2;
    PosX = intX(panel2);
    PosY = intY(panel2);
}
#endregion

#region 張飛
private void panel3_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources.a4);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P2V;
    pl = panel3;
    PosX = intX(panel3);
    PosY = intY(panel3);
}
#endregion

#region 馬超
private void panel4_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources.a5);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P2V;
    pl = panel4;
    PosX = intX(panel4);
    PosY = intY(panel4);
}
#endregion

#region 關羽
private void panel5_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources.a2);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P2H;
    pl = panel5;
    PosX = intX(panel5);
    PosY = intY(panel5);
}
#endregion

#region 黃忠
private void panel6_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources.a6);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P2V;
    pl = panel6;
    PosX = intX(panel6);
    PosY = intY(panel6);
}
#endregion

#region 士兵一
private void panel7_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources.a7);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P1;
    pl = panel7;
    PosX = intX(panel7);
    PosY = intY(panel7);
}
#endregion

#region 士兵二
private void panel8_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources.a8);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P1;
    pl = panel8;
    PosX = intX(panel8);
    PosY = intY(panel8);
}
#endregion

#region 士兵三
private void panel9_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources.a9);
    panel10.BackgroundImage = (Image)(Properties.Resources._010);
    PStyle = PStyles.P1;
    pl = panel9;
    PosX = intX(panel9);
    PosY = intY(panel9);
}
#endregion

#region 士兵四
private void panel10_Click(object sender, EventArgs e)
{
    panel1.BackgroundImage = (Image)(Properties.Resources._003);
    panel2.BackgroundImage = (Image)(Properties.Resources._001);
    panel3.BackgroundImage = (Image)(Properties.Resources._004);
    panel4.BackgroundImage = (Image)(Properties.Resources._005);
    panel5.BackgroundImage = (Image)(Properties.Resources._002);
    panel6.BackgroundImage = (Image)(Properties.Resources._006);
    panel7.BackgroundImage = (Image)(Properties.Resources._007);
    panel8.BackgroundImage = (Image)(Properties.Resources._008);
    panel9.BackgroundImage = (Image)(Properties.Resources._009);
    panel10.BackgroundImage = (Image)(Properties.Resources.a10);
    PStyle = PStyles.P1;
    pl = panel10;
    PosX = intX(panel10);
    PosY = intY(panel10);
}
#endregion

#region 判斷是否成功
///<summary>
///判斷是否成功
///</summary>
///<returns>true表示成功,false表示失敗</returns>
private bool Successful()
{
    if (panel2.Location == new Point(108, 343))
    {
        MessageBox.Show("恭喜你,曹操已經成功逃離華容道!", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
        return true;
    }
    else
        return false;
}
#endregion

//通過按鍵盤上的上、下、左、右鍵來移動人物方格
private void Form1_KeyUp(object sender, KeyEventArgs e)
{
    blUp = blDown = blLeft = blRight = false;//設置上、下、左、右方向移動不可用  
    switch (e.KeyData)
    {
        case Keys.Up:       //向上移動
            blUp = true;
            break;
        case Keys.Down:     //向下移動
            blDown = true;
            break;
        case Keys.Left:     //向左移動
            blLeft = true;
            break;
        case Keys.Right:    //向右移動
            blRight = true;
            break;
    }
    MovePosition(pl, PosX, PosY);//移動人物方格位置
    if (Successful())//判斷是否成功
        button1_Click(sender, e);//重新開始
}

//定義每個人物方格的大小, 共有x*y(x=4, y=5)個人物方格
public enum plEnumerate : int
{
    plSize = 100,   //人物方格大小
    plX = 4,        //定義列
    plY = 5,        //定義行
};

//判斷索引位置是否可用
public bool[,] PlState = new bool[(int)plEnumerate.plY, (int)plEnumerate.plX];

//定義一個數組,用來記錄各人物方格位置
private Point[,] position = new Point[5, 4] {
    { new Point(8, 43), new Point(108, 43), new Point(208, 43), new Point(308, 43) },
    { new Point(8, 143), new Point(108, 143), new Point(208, 143), new Point(308, 143) },
    { new Point(8, 243), new Point(108, 243), new Point(208, 243), new Point(308, 243) },
    { new Point(8, 343), new Point(108, 343), new Point(208, 343), new Point(308, 343) },
    { new Point(8, 443), new Point(108, 443), new Point(208, 443), new Point(308, 443) },
};

//獲取人物方格的位置
public Point[,] GetPosition()
{
    return this.position;
}

//定義各人物方格的形狀
public enum PStyles : int
{
    P1 = 0,//口
    P4 = 1,//田
    P2V = 2,//日
    P2H = 3,//口口
};

private int m_PStyle;//獲取人物樣式的編號

//記錄人物樣式形狀
public PStyles PStyle
{
    get { return (PStyles)this.m_PStyle; }
    set { this.m_PStyle = (int)value; }
}

private int m_X = 0, m_Y = 0;//記錄人物方格索引

//返回人物方格列索引
public int PosX
{
    get { return this.m_X; }
    set { this.m_X = value; }
}

//返回人物方格行索引
public int PosY
{
    get { return this.m_Y; }
    set { this.m_Y = value; }
}

#region 計算選中的人物方格在數組中的列索引
///<summary>
///計算選中的人物方格在數組中的列索引
///</summary>
///<param name="pl">選中的Panel控件</param>
///<returns>列索引</returns>
private int intX(Panel pl)
{
    int i = pl.Location.X - 8;
    return i / 100;
}
#endregion

#region 計算選中的人物方格在數組中的行索引
///<summary>
///計算選中的人物方格在數組中的行索引
///</summary>
///<param name="pl">選中的Panel控件</param>
///<returns>行索引</returns>
private int intY(Panel pl)
{
    int i = pl.Location.Y - 43;
    return i / 100;
}
#endregion

//定義4個變量,分別用來表示向上、下、左、右移動
private bool blUp, blDown, blLeft, blRight;

#region 移動人物位置
///<summary>
///移動人物位置
///</summary>
///<param name="pl">要移動的控件名稱</param>
///<param name="x">橫坐標在坐標數組中的索引</param>
///<param name="y">縱坐標在坐標數組中的索引</param>
///<returns>是否移動成功</returns>
public bool MovePosition(Panel pl, int x, int y)
{
    #region 上移
    if (blUp && (y - 1) >= 0)
    {
        switch (PStyle)
        {
            case PStyles.P4://田
            case PStyles.P2H://口口
                if (!PlState[y - 1, x] && !PlState[y - 1, x + 1])
                {
                    pl.Location = GetPosition()[y - 1, x];
                    if (PStyle == PStyles.P4)//田
                    {
                        PlState[y + 1, x] = false;
                        PlState[y + 1, x + 1] = false;
                    }
                    else if (PStyle == PStyles.P2H)//口口
                    {
                        PlState[y, x] = false;
                        PlState[y, x + 1] = false;
                    }
                    PlState[y - 1, x] = true;
                    PlState[y - 1, x + 1] = true;
                    PosY -= 1;
                    return true;
                }
                else return false;
            case PStyles.P2V://日
            case PStyles.P1://口
                if (!PlState[y - 1, x])
                {
                    pl.Location = GetPosition()[y - 1, x];
                    if (PStyle == PStyles.P2V)//日
                    {
                        PlState[y + 1, x] = false;
                    }
                    else if (PStyle == PStyles.P1)//口
                    {
                        PlState[y, x] = false;
                    }
                    PlState[y - 1, x] = true;
                    PosY -= 1;
                    return true;
                }
                else return false;
        }
    }
    #endregion
    #region 下移
    else if (blDown)
    {
        switch (PStyle)
        {
            case PStyles.P4://田
                if ((y + 2) < (int)plEnumerate.plY && !PlState[y + 2, x] && !PlState[y + 2, x + 1])
                {
                    pl.Location = GetPosition()[y + 1, x];
                    PlState[y, x] = false;
                    PlState[y, x + 1] = false;
                    PlState[y + 2, x] = true;
                    PlState[y + 2, x + 1] = true;
                    PosY += 1;
                    return true;
                }
                else return false;
            case PStyles.P2V://日
                if ((y + 2) < (int)plEnumerate.plY && !PlState[y + 2, x])
                {
                    pl.Location = GetPosition()[y + 1, x];
                    PlState[y, x] = false;
                    PlState[y + 2, x] = true;
                    PosY += 1;
                    return true;
                }
                else return false;
            case PStyles.P1://口
                if ((y + 1) < (int)plEnumerate.plY && !PlState[y + 1, x])
                {
                    pl.Location = GetPosition()[y + 1, x];
                    PlState[y, x] = false;
                    PlState[y + 1, x] = true;
                    PosY += 1;
                    return true;
                }
                else return false;
            case PStyles.P2H://口口
                if ((y + 1) < (int)plEnumerate.plY && !PlState[y + 1, x] && !PlState[y + 1, x + 1])
                {
                    pl.Location = GetPosition()[y + 1, x];
                    PlState[y, x] = false;
                    PlState[y, x + 1] = false;
                    PlState[y + 1, x] = true;
                    PlState[y + 1, x + 1] = true;
                    PosY += 1;
                    return true;
                }
                else return false;
        }
    }
    #endregion
    #region 左移
    else if (blLeft)
    {
        switch (PStyle)
        {
            case PStyles.P2V://日
            case PStyles.P4://田
                if (x - 1 >= 0 && !PlState[y, x - 1] && !PlState[y + 1, x - 1])
                {
                    pl.Location = GetPosition()[y, x - 1];
                    switch (PStyle)
                    {
                        case PStyles.P4://田
                            PlState[y, x + 1] = false;
                            PlState[y + 1, x + 1] = false;
                            break;

                        case PStyles.P2V://日
                            PlState[y, x] = false;
                            PlState[y + 1, x] = false;
                            break;
                    }
                    PlState[y, x - 1] = true;
                    PlState[y + 1, x - 1] = true;
                    PosX -= 1;
                    return true;
                }
                else return false;
            case PStyles.P1://口
            case PStyles.P2H://口口
                if (x - 1 >= 0 && !PlState[y, x - 1])
                {
                    pl.Location = GetPosition()[y, x - 1];
                    if (PStyle == PStyles.P2H)//口口
                    {
                        PlState[y, x + 1] = false;
                    }
                    else
                    {
                        PlState[y, x] = false;
                    }
                    PlState[y, x - 1] = true;
                    PosX -= 1;
                    return true;
                }
                else return false;
        }
    }
    #endregion
    #region 右移
    else if (blRight)
    {
        switch (PStyle)
        {
            case PStyles.P4://田
                if (x + 2 < (int)plEnumerate.plX && !PlState[y, x + 2] && !PlState[y + 1, x + 2])
                {
                    pl.Location = GetPosition()[y, x + 1];
                    PlState[y, x] = false;
                    PlState[y + 1, x] = false;
                    PlState[y, x + 2] = true;
                    PlState[y + 1, x + 2] = true;
                    PosX += 1;
                    return true;
                }
                else return false;
            case PStyles.P1://口
                if (x + 1 < (int)plEnumerate.plX && !PlState[y, x + 1])
                {
                    pl.Location = GetPosition()[y, x + 1];
                    PlState[y, x] = false;
                    PlState[y, x + 1] = true;
                    PosX += 1;
                    return true;
                }
                else return false;
            case PStyles.P2H://口口
                if (x + 2 < (int)plEnumerate.plX && !PlState[y, x + 2])
                {
                    pl.Location = GetPosition()[y, x + 1];
                    PlState[y, x] = false;
                    PlState[y, x + 2] = true;
                    PosX += 1;
                    return true;
                }
                else return false;
            case PStyles.P2V://日
                if (x + 1 < (int)plEnumerate.plX && !PlState[y, x + 1] && !PlState[y + 1, x + 1])
                {
                    pl.Location = GetPosition()[y, x + 1];
                    PlState[y, x] = false;
                    PlState[y + 1, x] = false;
                    PlState[y, x + 1] = true;
                    PlState[y + 1, x + 1] = true;
                    PosX += 1;
                    return true;
                }
                else return false;
        }
    }
    #endregion
    return false;
}      
#endregion
}
partial class Form1
{
    /// <summary>
    /// 必需的設計器變量。
    /// </summary>
    private System.ComponentModel.IContainer components = null;

    /// <summary>
    /// 清理所有正在使用的資源。
    /// </summary>
    /// <param name="disposing">如果應釋放托管資源,為 true;否則為 false。</param>
    protected override void Dispose(bool disposing)
    {
        if (disposing && (components != null))
        {
            components.Dispose();
        }
        base.Dispose(disposing);
    }

    #region Windows 窗體設計器生成的代碼

    /// <summary>
    /// 設計器支持所需的方法 - 不要
    /// 使用代碼編輯器修改此方法的內容。
    /// </summary>
    private void InitializeComponent()
    {
        this.panel1 = new System.Windows.Forms.Panel();
        this.panel2 = new System.Windows.Forms.Panel();
        this.panel3 = new System.Windows.Forms.Panel();
        this.panel4 = new System.Windows.Forms.Panel();
        this.panel5 = new System.Windows.Forms.Panel();
        this.panel6 = new System.Windows.Forms.Panel();
        this.panel7 = new System.Windows.Forms.Panel();
        this.panel8 = new System.Windows.Forms.Panel();
        this.panel9 = new System.Windows.Forms.Panel();
        this.panel10 = new System.Windows.Forms.Panel();
        this.button1 = new System.Windows.Forms.Button();
        this.SuspendLayout();
        // 
        // panel1
        // 
        this.panel1.BackgroundImage = global::HuaRongDao.Properties.Resources._003;
        this.panel1.Location = new System.Drawing.Point(8, 43);
        this.panel1.Name = "panel1";
        this.panel1.Size = new System.Drawing.Size(100, 200);
        this.panel1.TabIndex = 0;
        this.panel1.Click += new System.EventHandler(this.panel1_Click);
        // 
        // panel2
        // 
        this.panel2.BackgroundImage = global::HuaRongDao.Properties.Resources._001;
        this.panel2.Location = new System.Drawing.Point(108, 43);
        this.panel2.Name = "panel2";
        this.panel2.Size = new System.Drawing.Size(200, 200);
        this.panel2.TabIndex = 0;
        this.panel2.Click += new System.EventHandler(this.panel2_Click);
        // 
        // panel3
        // 
        this.panel3.BackgroundImage = global::HuaRongDao.Properties.Resources._004;
        this.panel3.Location = new System.Drawing.Point(308, 43);
        this.panel3.Name = "panel3";
        this.panel3.Size = new System.Drawing.Size(100, 200);
        this.panel3.TabIndex = 1;
        this.panel3.Click += new System.EventHandler(this.panel3_Click);
        // 
        // panel4
        // 
        this.panel4.BackgroundImage = global::HuaRongDao.Properties.Resources._005;
        this.panel4.Location = new System.Drawing.Point(8, 243);
        this.panel4.Name = "panel4";
        this.panel4.Size = new System.Drawing.Size(100, 200);
        this.panel4.TabIndex = 2;
        this.panel4.Click += new System.EventHandler(this.panel4_Click);
        // 
        // panel5
        // 
        this.panel5.BackgroundImage = global::HuaRongDao.Properties.Resources._002;
        this.panel5.Location = new System.Drawing.Point(108, 243);
        this.panel5.Name = "panel5";
        this.panel5.Size = new System.Drawing.Size(200, 100);
        this.panel5.TabIndex = 3;
        this.panel5.Click += new System.EventHandler(this.panel5_Click);
        // 
        // panel6
        // 
        this.panel6.BackgroundImage = global::HuaRongDao.Properties.Resources._006;
        this.panel6.Location = new System.Drawing.Point(308, 243);
        this.panel6.Name = "panel6";
        this.panel6.Size = new System.Drawing.Size(100, 200);
        this.panel6.TabIndex = 4;
        this.panel6.Click += new System.EventHandler(this.panel6_Click);
        // 
        // panel7
        // 
        this.panel7.BackgroundImage = global::HuaRongDao.Properties.Resources._007;
        this.panel7.Location = new System.Drawing.Point(108, 343);
        this.panel7.Name = "panel7";
        this.panel7.Size = new System.Drawing.Size(100, 100);
        this.panel7.TabIndex = 5;
        this.panel7.Click += new System.EventHandler(this.panel7_Click);
        // 
        // panel8
        // 
        this.panel8.BackgroundImage = global::HuaRongDao.Properties.Resources._008;
        this.panel8.Location = new System.Drawing.Point(208, 343);
        this.panel8.Name = "panel8";
        this.panel8.Size = new System.Drawing.Size(100, 100);
        this.panel8.TabIndex = 6;
        this.panel8.Click += new System.EventHandler(this.panel8_Click);
        // 
        // panel9
        // 
        this.panel9.BackgroundImage = global::HuaRongDao.Properties.Resources._009;
        this.panel9.Location = new System.Drawing.Point(8, 443);
        this.panel9.Name = "panel9";
        this.panel9.Size = new System.Drawing.Size(100, 100);
        this.panel9.TabIndex = 7;
        this.panel9.Click += new System.EventHandler(this.panel9_Click);
        // 
        // panel10
        // 
        this.panel10.BackgroundImage = global::HuaRongDao.Properties.Resources._010;
        this.panel10.Location = new System.Drawing.Point(308, 443);
        this.panel10.Name = "panel10";
        this.panel10.Size = new System.Drawing.Size(100, 100);
        this.panel10.TabIndex = 8;
        this.panel10.Click += new System.EventHandler(this.panel10_Click);
        // 
        // button1
        // 
        this.button1.FlatStyle = System.Windows.Forms.FlatStyle.Popup;
        this.button1.Font = new System.Drawing.Font("宋體", 12F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
        this.button1.ForeColor = System.Drawing.Color.White;
        this.button1.Location = new System.Drawing.Point(11, 9);
        this.button1.Name = "button1";
        this.button1.Size = new System.Drawing.Size(75, 25);
        this.button1.TabIndex = 0;
        this.button1.Text = "新游戲";
        this.button1.UseVisualStyleBackColor = true;
        this.button1.Click += new System.EventHandler(this.button1_Click);
        // 
        // Form1
        // 
        this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 12F);
        this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
        this.BackColor = System.Drawing.Color.Teal;
        this.ClientSize = new System.Drawing.Size(413, 550);
        this.Controls.Add(this.button1);
        this.Controls.Add(this.panel10);
        this.Controls.Add(this.panel9);
        this.Controls.Add(this.panel8);
        this.Controls.Add(this.panel7);
        this.Controls.Add(this.panel6);
        this.Controls.Add(this.panel5);
        this.Controls.Add(this.panel4);
        this.Controls.Add(this.panel3);
        this.Controls.Add(this.panel2);
        this.Controls.Add(this.panel1);
        this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
        this.KeyPreview = true;
        this.MaximizeBox = false;
        this.Name = "Form1";
        this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
        this.Text = "華容道";
        this.Load += new System.EventHandler(this.Form1_Load);
        this.KeyUp += new System.Windows.Forms.KeyEventHandler(this.Form1_KeyUp);
        this.ResumeLayout(false);

    }

    #endregion

    private System.Windows.Forms.Panel panel1;
    private System.Windows.Forms.Panel panel2;
    private System.Windows.Forms.Panel panel3;
    private System.Windows.Forms.Panel panel4;
    private System.Windows.Forms.Panel panel5;
    private System.Windows.Forms.Panel panel6;
    private System.Windows.Forms.Panel panel7;
    private System.Windows.Forms.Panel panel8;
    private System.Windows.Forms.Panel panel9;
    private System.Windows.Forms.Panel panel10;
    private System.Windows.Forms.Button button1;
}

以上就是C#游戲開發之實現華容道游戲的詳細內容,更多關于C#華容道的資料請關注腳本之家其它相關文章!

相關文章

  • WPF調用WindowsAPI實現屏幕錄制

    WPF調用WindowsAPI實現屏幕錄制

    這篇文章主要為大家詳細介紹了WPF如何調用WindowsAPI實現屏幕錄制,文中的示例代碼講解詳細,對我們學習或工作有一定幫助,感興趣的小伙伴可以了解一下
    2023-05-05
  • C#中數組、ArrayList和List三者的區別詳解及實例

    C#中數組、ArrayList和List三者的區別詳解及實例

    這篇文章主要介紹了C#中數組、ArrayList和List三者的區別詳解及實例的相關資料,需要的朋友可以參考下
    2016-12-12
  • C#函數式程序設計之用閉包封裝數據的實現代碼

    C#函數式程序設計之用閉包封裝數據的實現代碼

    如果一個程序設計語言能夠用高階函數解決問題,則意味著數據作用域問題已十分突出。當函數可以當成參數和返回值在函數之間進行傳遞時,編譯器利用閉包擴展變量的作用域,以保證隨時能得到所需要的數據
    2014-03-03
  • C#實現Bitmap類型與Byte[]類型相互轉化的示例詳解

    C#實現Bitmap類型與Byte[]類型相互轉化的示例詳解

    在C#編程中,Bitmap類型和Byte[]類型之間的相互轉化是圖像處理和數據傳輸中常見的需求,Bitmap類型表示一個位圖圖像,而Byte[]類型則是一個字節數組,本文將詳細介紹如何在這兩種類型之間進行相互轉化,需要的朋友可以參考下
    2024-07-07
  • C#套接字(Socket)通信之UDP組播詳解

    C#套接字(Socket)通信之UDP組播詳解

    單播 Unicast是指客戶端與服務器之間的點到點連接,組播和單播的差別是,必須得有一個“組”的概念,然后才能進行組播,本文就來和大家講講UDP組播的實現吧
    2023-05-05
  • C#實現只運行單個實例應用程序的方法(使用VB.Net的IsSingleInstance)

    C#實現只運行單個實例應用程序的方法(使用VB.Net的IsSingleInstance)

    這篇文章主要介紹了C#實現只運行單個實例應用程序的方法,本文使用的是VB.Net的IsSingleInstance方法實現,優于Mutex 和 Process 這兩種只運行單個應用程序?qū)嵗姆椒?需要的朋友可以參考下
    2014-07-07
  • C#微信公眾號開發之服務器配置

    C#微信公眾號開發之服務器配置

    這篇文章介紹了C#微信公眾號開發之服務器配置,文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
    2022-06-06
  • C#在MEF框架中手動導入依賴模塊

    C#在MEF框架中手動導入依賴模塊

    這篇文章介紹了C#在MEF框架中手動導入依賴模塊的方法,文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
    2022-06-06
  • C#如何處理JSON

    C#如何處理JSON

    這篇文章主要介紹了C#如何處理JSON問題,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教
    2023-01-01
  • C#編程獲取IP地址的方法示例

    C#編程獲取IP地址的方法示例

    這篇文章主要介紹了C#編程獲取IP地址的方法,結合實例形式分析了C#獲取客戶端IP地址的具體實現技巧,需要的朋友可以參考下
    2017-01-01

最新評論