k8s搭建mysql集群實現主從復制的方法步驟

更新時間：2023年01月05日 16:27:28 作者：折言阿

本文是基于已有k8s環境下,介紹在k8s環境中部署mysql主從集群的實現步驟，對mysql學習有一定的幫助，感興趣的可以學習一下

環境介紹

名稱	版本	操作系統	IP	備注
K8S集群	1.20.15	Centos7.9	192.168.11.21 192.168.11.22 192.168.11.23	21為k8s-master 22為k8s-node01 23為k8s-node02
MySql	5.7	Centos7.9		一主兩從
nfs服務器		Centos7.9	192.168.11.24	共享目錄為/nfs

一、部署NFS服務器

11.24：

1.創建NFS共享目錄

mkdir -p /nfs

2.安裝NFS服務

yum -y install nfs-utils rpcbind

3.編輯NFS配置

echo "/nfs  *(rw,async,no_root_squash)" >>/etc/exports

4.啟動服務

systemctl enable --now nfs-server
systemctl enable --now rpcbind

5.驗證

showmount -e  ##看是否能看到/nfs *字段；如果沒有該命令yum -y install showmount

11.21/22/23（所有K8S節點）：

1.安裝NFS

yum -y install nfs-utils

2.測試是否能檢測到NFS共享目錄

showmount -e 192.168.11.24  ##看是否能看到/nfs *

二、創建PV

11.21：

1、創建存放MySQL的yaml清單目錄

mkdir  -p /webapp
cd /webapp

2、創建NFS的YAML文件

vim nfs-client.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nfs-client-provisioner
  labels:
    app: nfs-client-provisioner
    # replace with namespace where provisioner is deployed
  namespace: default
spec:
  replicas: 1
  strategy:
    type: Recreate
  selector:
    matchLabels:
      app: nfs-client-provisioner
  template:
    metadata:
      labels:
        app: nfs-client-provisioner
    spec:
      serviceAccountName: nfs-client-provisioner
      containers:
        - name: nfs-client-provisioner
          image: registry.cn-beijing.aliyuncs.com/xngczl/nfs-subdir-external-provisione:v4.0.0
          volumeMounts:
            - name: nfs-client-root
              mountPath: /persistentvolumes
          env:
            - name: PROVISIONER_NAME
              value: fuseim.pri/ifs #注意這個值，可以自定義
            - name: NFS_SERVER
              value: 192.168.11.24  ##IP不同修改此處
            - name: NFS_PATH
              value: /nfs   ##nfs共享目錄
      volumes:
        - name: nfs-client-root
          nfs:
            server: 192.168.11.24  ##IP不同修改此處
            path: /nfs  ##nfs共享目錄

創建rbac

vim nfs-client-rbac.yaml

apiVersion: v1
kind: ServiceAccount
metadata:
  name: nfs-client-provisioner
  # replace with namespace where provisioner is deployed
  namespace: default
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: nfs-client-provisioner-runner
rules:
  - apiGroups: [""]
    resources: ["nodes"]
    verbs: ["get", "list", "watch"]
  - apiGroups: [""]
    resources: ["persistentvolumes"]
    verbs: ["get", "list", "watch", "create", "delete"]
  - apiGroups: [""]
    resources: ["persistentvolumeclaims"]
    verbs: ["get", "list", "watch", "update"]
  - apiGroups: ["storage.k8s.io"]
    resources: ["storageclasses"]
    verbs: ["get", "list", "watch"]
  - apiGroups: [""]
    resources: ["events"]
    verbs: ["create", "update", "patch"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: run-nfs-client-provisioner
subjects:
  - kind: ServiceAccount
    name: nfs-client-provisioner
    # replace with namespace where provisioner is deployed
    namespace: default
roleRef:
  kind: ClusterRole
  name: nfs-client-provisioner-runner
  apiGroup: rbac.authorization.k8s.io
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: leader-locking-nfs-client-provisioner
  # replace with namespace where provisioner is deployed
  namespace: default
rules:
  - apiGroups: [""]
    resources: ["endpoints"]
    verbs: ["get", "list", "watch", "create", "update", "patch"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: leader-locking-nfs-client-provisioner
  # replace with namespace where provisioner is deployed
  namespace: default
subjects:
  - kind: ServiceAccount
    name: nfs-client-provisioner
    # replace with namespace where provisioner is deployed
    namespace: default
roleRef:
  kind: Role
  name: leader-locking-nfs-client-provisioner
  apiGroup: rbac.authorization.k8s.io

創建sc

vim nfs-client-class.yaml

apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata: 
  name: course-nfs-storage

啟動：

kubectl ?apply ?-f nfs-client.yaml?
???????kubectl ?apply ?-f nfs-client-rbac.yaml
kubectl ?apply ?-f nfs-client-class.yaml?
kubectl ?get po,sc
NAME ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?READY ? STATUS ? ?RESTARTS ? AGE
pod/nfs-client-provisioner-8579c9d69b-m6vp4 ? 1/1 ? ? Running ? 0 ? ? ? ? ?13m

NAME ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? PROVISIONER ? ? ?RECLAIMPOLICY ? VOLUMEBINDINGMODE ? ALLOWVOLUMEEXPANSION ? AGE
storageclass.storage.k8s.io/course-nfs-storage ? fuseim.pri/ifs ? Delete ? ? ? ? ?Immediate ? ? ? ? ? false ? ? ? ? ? ? ? ? ?13m

三、編寫MySQL的yaml文件

11.21：

mkdir -p /weapp/mysql
cd  /weapp/mysql

創建CM

```bash

vim mysql-configmap.yaml

apiVersion: v1
kind: ConfigMap
metadata:
  name: mysql
  labels:
    app: mysql
data:
  master.cnf: |
    # Apply this config only on the master.
    [mysqld]
    log-bin
  slave.cnf: |
    # Apply this config only on slaves.
    [mysqld]
    super-read-only

此文件定義了兩個MySQL的配置文件
1.是master.cnf，開啟了log-bin。開啟二進制日志文件后才能進行主從復制
2.slave.cnf，開啟了super-read-only，表示從節點只能讀，不能進行其他操作。
兩個文件以配置文件形式掛載到mysql容器中`

創建MySQL的Service

vim mysql-services.yaml

apiVersion: v1
kind: Service
metadata:
  name: mysql
  labels:
    app: mysql
spec:
  ports:
  - name: mysql
    port: 3306
  clusterIP: None
  selector:
    app: mysql
---
# Client service for connecting to any MySQL instance for reads.
# For writes, you must instead connect to the master: mysql-0.mysql.
apiVersion: v1
kind: Service
metadata:
  name: mysql-read
  labels:
    app: mysql
spec:
  ports:
  - name: mysql
    port: 3306
  selector:
    app: mysql

創MySQL的StatefulSet

vim mysql-statefulset.yaml

apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: mysql
spec:
  selector:
    matchLabels:
      app: mysql
  serviceName: mysql
  replicas: 3
  template:
    metadata:
      labels:
        app: mysql
    spec:
      initContainers:
      - name: init-mysql
        image: mysql:5.7
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Generate mysql server-id from pod ordinal index.
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          echo [mysqld] > /mnt/conf.d/server-id.cnf
          # Add an offset to avoid reserved server-id=0 value.
          echo server-id=$((100 + $ordinal)) >> /mnt/conf.d/server-id.cnf
          # Copy appropriate conf.d files from config-map to emptyDir.
          if [[ $ordinal -eq 0 ]]; then
            cp /mnt/config-map/master.cnf /mnt/conf.d/
          else
            cp /mnt/config-map/slave.cnf /mnt/conf.d/
          fi          
        volumeMounts:
        - name: conf
          mountPath: /mnt/conf.d
        - name: config-map
          mountPath: /mnt/config-map
      - name: clone-mysql
        image: fxkjnj/xtrabackup:1.0
        command:
        - bash
        - "-c"
        - |
          set -ex
          # Skip the clone if data already exists.
          [[ -d /var/lib/mysql/mysql ]] && exit 0
          # Skip the clone on master (ordinal index 0).
          [[ `hostname` =~ -([0-9]+)$ ]] || exit 1
          ordinal=${BASH_REMATCH[1]}
          [[ $ordinal -eq 0 ]] && exit 0
          # Clone data from previous peer.
          ncat --recv-only mysql-$(($ordinal-1)).mysql 3307 | xbstream -x -C /var/lib/mysql
          # Prepare the backup.
          xtrabackup --prepare --target-dir=/var/lib/mysql          
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
      containers:
      - name: mysql
        image: mysql:5.7
        env:
        - name: MYSQL_ALLOW_EMPTY_PASSWORD
          value: "1"
        ports:
        - name: mysql
          containerPort: 3306
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 500m
            memory: 1Gi
        livenessProbe:
          exec:
            command: ["mysqladmin", "ping"]
          initialDelaySeconds: 30
          periodSeconds: 10
          timeoutSeconds: 5
        readinessProbe:
          exec:
            # Check we can execute queries over TCP (skip-networking is off).
            command: ["mysql", "-h", "127.0.0.1", "-e", "SELECT 1"]
          initialDelaySeconds: 5
          periodSeconds: 2
          timeoutSeconds: 1
      - name: xtrabackup
        image: fxkjnj/xtrabackup:1.0
        ports:
        - name: xtrabackup
          containerPort: 3307
        command:
        - bash
        - "-c"
        - |
          set -ex
          cd /var/lib/mysql
 
          # Determine binlog position of cloned data, if any.
          if [[ -f xtrabackup_slave_info && "x$(<xtrabackup_slave_info)" != "x" ]]; then
            # XtraBackup already generated a partial "CHANGE MASTER TO" query
            # because we're cloning from an existing slave. (Need to remove the tailing semicolon!)
            cat xtrabackup_slave_info | sed -E 's/;$//g' > change_master_to.sql.in
            # Ignore xtrabackup_binlog_info in this case (it's useless).
            rm -f xtrabackup_slave_info xtrabackup_binlog_info
          elif [[ -f xtrabackup_binlog_info ]]; then
            # We're cloning directly from master. Parse binlog position.
            [[ `cat xtrabackup_binlog_info` =~ ^(.*?)[[:space:]]+(.*?)$ ]] || exit 1
            rm -f xtrabackup_binlog_info xtrabackup_slave_info
            echo "CHANGE MASTER TO MASTER_LOG_FILE='${BASH_REMATCH[1]}',\
                  MASTER_LOG_POS=${BASH_REMATCH[2]}" > change_master_to.sql.in
          fi
 
          # Check if we need to complete a clone by starting replication.
          if [[ -f change_master_to.sql.in ]]; then
            echo "Waiting for mysqld to be ready (accepting connections)"
            until mysql -h 127.0.0.1 -e "SELECT 1"; do sleep 1; done
 
            echo "Initializing replication from clone position"
            mysql -h 127.0.0.1 \
                  -e "$(<change_master_to.sql.in), \
                          MASTER_HOST='mysql-0.mysql', \
                          MASTER_USER='root', \
                          MASTER_PASSWORD='', \
                          MASTER_CONNECT_RETRY=10; \
                        START SLAVE;" || exit 1
            # In case of container restart, attempt this at-most-once.
            mv change_master_to.sql.in change_master_to.sql.orig
          fi
 
          # Start a server to send backups when requested by peers.
          exec ncat --listen --keep-open --send-only --max-conns=1 3307 -c \
            "xtrabackup --backup --slave-info --stream=xbstream --host=127.0.0.1 --user=root"          
        volumeMounts:
        - name: data
          mountPath: /var/lib/mysql
          subPath: mysql
        - name: conf
          mountPath: /etc/mysql/conf.d
        resources:
          requests:
            cpu: 100m
            memory: 100Mi
      volumes:
      - name: conf
        emptyDir: {}
      - name: config-map
        configMap:
          name: mysql
  volumeClaimTemplates:
  - metadata:
      name: data
    spec:
      storageClassName: "course-nfs-storage"
      accessModes: ["ReadWriteOnce"]
      resources:
        requests:
          storage: 0.5Gi

使用xtrbackup工具進行初始化數據的備份
使用linux自帶的ncat工具進行容器初始化數據拷貝
使用mysql的bin-log實現主從復制
使用mysqladmin的ping作為健康檢查方式
利用pod的主機名的序號來判定當前節點為主還是從，再根據節點拷貝不同的配置文件到指定目錄

四、啟動MySQL

11.21

kubectl apply -f mysql-configmap.yaml
kubectl apply -f mysql-services.yaml
kubectl apply -f mysql-statefulset.yaml
kubectl get po
NAME      READY   STATUS    RESTARTS   AGE      IP            NODE            NOMINATED NODE    READINESS GATES
mysql-0   2/2     Running   0          3h12m    10.244.0.5    k8s-master1     <none>            <none>
mysql-1   2/2     Running   0          3h11m    10.244.1.6    k8s-node02      <none>            <none>
mysql-2   2/2     Running   0          3h10m    10.244.1.5    k8s-node01      <none>            <none>

五、驗證MySQL主從復制

11.21：

kubectl  exec  -it mysql-0 -- bash  ##進入mysqk-0pod
  mysql -h mysql-0.mysql  ##進入數據庫
    CREATE DATABASE test;  ##創建庫表。
    CREATE TABLE test.messages (message VARCHAR(250));
    INSERT INTO test.messages VALUES ('hello');
    \q
exit
kubectl  exec  -it mysql-1 -- bash  ##進入mysql-1pod
  mysql -h mysql-1.mysql  ##進入數據庫
    SELECT * FROM test.messages;  ##看是否看得到創建的test庫

獲得以下輸出

Waiting for pod default/mysql-client to be running, status is Pending, pod ready: false
+---------+
| message |
+---------+
| hello |
+---------+

到此這篇關于k8s搭建mysql集群實現主從復制的方法步驟的文章就介紹到這了,更多相關k8s搭建mysql實現主從復制內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: