快捷導航

C#調用js庫的方法小結

更新時間：2023年04月07日 09:22:44 作者：0611163

本文主要介紹了C#調用js庫的方法小結，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

前言

用.net6開發一個Winform程序，處理Excel文件，并把結果導出Excel文件。
要用到兩個算法，一是turf.js庫的booleanPointInPolygon方法，判斷經緯度坐標是否在區域內；二是經緯度糾偏算法，因?yàn)閷?duì)方給的區域坐標集合有偏移，需要糾偏。
這兩個算法，網上找C#的實現，一是不好找；二是找來的不信任，我還要測試以確保沒有問題。我之前做電子地圖使用過turf.js庫和js版本的糾偏算法，比較信任，確定沒有問題。
所以我就打算通過C#調用js庫的方法，來實現數據處理。

安裝ClearScript

ClearScript是微軟開源的js引擎，支持windows、linux、mac。
NuGet搜索安裝：

Microsoft.ClearScript.Core
Microsoft.ClearScript.V8
Microsoft.ClearScript.V8.Native.win-x64

引入js文件

把leaflet.mapCorrection.js、turf.v6.5.0.min.js和自己寫的calc.js放入工程中，右擊屬性設置復制到輸出目錄：如果較新則復制。
calc.js通過調用leaflet.mapCorrection.js和turf.v6.5.0.min.js中的方法實現功能，文件內容如下：

function calc(lng, lat, polygonStr) {
    var point = turf.point([lng, lat]);
    var polygonPoints = JSON.parse(polygonStr);
    var polygon = turf.polygon(polygonPoints);

    var bl = turf.booleanPointInPolygon(point, polygon);
    return bl;
}

function correct(lng, lat) {
    var newPoint = new CoordConvertor().gcj02_To_gps84(lng, lat);
    return newPoint;
}

創建V8ScriptEngine對象

private V8ScriptEngine _engine = new V8ScriptEngine();

通過js引擎加載js文件

在Form1_Load方法中添加如下代碼：

_engine.AddHostType("Console", typeof(Console));
string fileName = AppDomain.CurrentDomain.BaseDirectory + "turf.v6.5.0.min.js";
string js;
using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
{
    byte[] bArr = new byte[fs.Length];
    await fs.ReadAsync(bArr, 0, bArr.Length);
    js = ASCIIEncoding.UTF8.GetString(bArr);
}
_engine.Execute(js);
fileName = AppDomain.CurrentDomain.BaseDirectory + "calc.js";
using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
{
    byte[] bArr = new byte[fs.Length];
    await fs.ReadAsync(bArr, 0, bArr.Length);
    js = ASCIIEncoding.UTF8.GetString(bArr);
}
_engine.Execute(js);
fileName = AppDomain.CurrentDomain.BaseDirectory + "leaflet.mapCorrection.js";
using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
{
    byte[] bArr = new byte[fs.Length];
    await fs.ReadAsync(bArr, 0, bArr.Length);
    js = ASCIIEncoding.UTF8.GetString(bArr);
}
_engine.Execute(js);

C#調用js方法實現經緯度坐標糾偏

double lng = Convert.ToDouble(lnglat[0]);
double lat = Convert.ToDouble(lnglat[1]);

//坐標糾偏
dynamic newPoint = _engine.Invoke("correct", new object[] { lng, lat });
lng = newPoint.lng;
lat = newPoint.lat;

C#調用js方法判斷經緯度點位是否在多邊形內

//_selectedRegionPoints是多邊形坐標點位集合json字符串
bool bl = (bool)_engine.Invoke("calc", new object[] { lng, lat, _selectedRegionPoints });

程序開發完成后發布

發布后文件夾拷貝到用戶的win10系統中可以直接使用，不需要安裝.net6環境。我自己的很老的win7 sp1虛擬機上跑不起來，ClearScriptV8.win-x64.dll無法加載成功，暫不知道為什么。

Form1.cs完整代碼如下：

當時程序?qū)懙募保?dāng)然，程序還可以優化，不過沒必要，要處理的數據量不大，功能沒問題就行。

using Models;
using Newtonsoft.Json;
using System.Drawing;
using System.Text;
using System.Text.RegularExpressions;
using Microsoft.ClearScript.JavaScript;
using Microsoft.ClearScript.V8;
using NPOI.HSSF.UserModel;
using NPOI.XSSF.UserModel;
using NPOI.SS.UserModel;
using System.Reflection;
using System.Windows.Forms;
using NPOI.Util;

namespace 點位
{
    public partial class Form1 : Form
    {
        private Regions _regions;
        private List<CameraInfo> _cameraList = new List<CameraInfo>();
        private V8ScriptEngine _engine = new V8ScriptEngine();
        private string _selectedRegionPoints;

        public Form1()
        {
            InitializeComponent();
        }

        private async void Form1_Load(object sender, EventArgs e)
        {
            //通過js引擎加載js文件
            _engine.AddHostType("Console", typeof(Console));
            string fileName = AppDomain.CurrentDomain.BaseDirectory + "turf.v6.5.0.min.js";
            string js;
            using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
            {
                byte[] bArr = new byte[fs.Length];
                await fs.ReadAsync(bArr, 0, bArr.Length);
                js = ASCIIEncoding.UTF8.GetString(bArr);
            }
            _engine.Execute(js);
            fileName = AppDomain.CurrentDomain.BaseDirectory + "calc.js";
            using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
            {
                byte[] bArr = new byte[fs.Length];
                await fs.ReadAsync(bArr, 0, bArr.Length);
                js = ASCIIEncoding.UTF8.GetString(bArr);
            }
            _engine.Execute(js);
            fileName = AppDomain.CurrentDomain.BaseDirectory + "leaflet.mapCorrection.js";
            using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
            {
                byte[] bArr = new byte[fs.Length];
                await fs.ReadAsync(bArr, 0, bArr.Length);
                js = ASCIIEncoding.UTF8.GetString(bArr);
            }
            _engine.Execute(js);

            //行政區劃下拉列表初始化
            fileName = AppDomain.CurrentDomain.BaseDirectory + "安徽.json";
            using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Read))
            {
                byte[] bArr = new byte[fs.Length];
                await fs.ReadAsync(bArr, 0, bArr.Length);
                string json = ASCIIEncoding.UTF8.GetString(bArr);
                _regions = JsonConvert.DeserializeObject<Regions>(json);
            }

            List<Records> citys = _regions.RECORDS.ToList().FindAll(a => a.civilcode.Length == 4);
            cbxCity.DataSource = citys;
            cbxCity.DisplayMember = "civilname";
            cbxCity.ValueMember = "civilcode";
        }

        private void button1_Click(object sender, EventArgs e)
        {
            openFileDialog1.Title = "選擇要處理的Excel文件";
            openFileDialog1.Filter = "Excel文件(*.xlsx)|*.xlsx";
            if (openFileDialog1.ShowDialog() == DialogResult.OK)
            {
                using (FileStream fs = new FileStream(openFileDialog1.FileName, FileMode.Open, FileAccess.Read, FileShare.Read))
                {

                }
            }
        }


        private void cbxCity_SelectedIndexChanged(object sender, EventArgs e)
        {
            Records record = cbxCity.SelectedItem as Records;
            List<Records> citys = _regions.RECORDS.ToList().FindAll(a => a.civilcode.Length > 4 && a.civilcode.Substring(0, 4) == record.civilcode);
            citys.Insert(0, new Records() { civilcode = null, civilname = "==請選擇==" });
            cbxCounty.DataSource = citys;
            cbxCounty.DisplayMember = "civilname";
            cbxCounty.ValueMember = "civilcode";
        }

        private void cbxCounty_SelectedIndexChanged(object sender, EventArgs e)
        {
            Records record = cbxCounty.SelectedItem as Records;
            if (record.civilcode == null)
            {
                record = cbxCity.SelectedItem as Records;
            }
            Regex regex = new Regex(@"^POLYGON\((\(.*\),?)*\)$");
            var mc = regex.Matches(record.polygongeo);
            StringBuilder sb = new StringBuilder();
            foreach (Match m in mc)
            {
                string value = m.Groups[1].Value.TrimStart('(').TrimEnd(')');
                string[] lnglatArr = value.Split(',');
                bool first = true;
                if (sb.Length > 0)
                {
                    sb.Append(",");
                }
                sb.Append("[[");
                foreach (string lnglatStr in lnglatArr)
                {
                    string[] lnglat = lnglatStr.Trim().Split(' ');
                    double lng = Convert.ToDouble(lnglat[0]);
                    double lat = Convert.ToDouble(lnglat[1]);

                    //坐標糾偏
                    dynamic newPoint = _engine.Invoke("correct", new object[] { lng, lat });
                    lng = newPoint.lng;
                    lat = newPoint.lat;

                    if (first)
                    {
                        first = false;
                        sb.AppendFormat($"[{lng}, {lat}]");
                    }
                    else
                    {
                        sb.AppendFormat($",[{lng}, {lat}]");
                    }
                }
                sb.Append("]]");
            }
            _selectedRegionPoints = sb.ToString();
        }

        private async void openFileDialog1_FileOk(object sender, System.ComponentModel.CancelEventArgs e)
        {
            await Task.Delay(10);

            //讀取Excel
            _cameraList = new List<CameraInfo>();
            using (FileStream fs = new FileStream(openFileDialog1.FileName, FileMode.Open, FileAccess.Read, FileShare.Read))
            {
                XSSFWorkbook workbook = new XSSFWorkbook(fs);
                ISheet sheet = workbook.GetSheetAt(0);
                for (int i = 1; i <= sheet.LastRowNum; i++)
                {
                    IRow row = sheet.GetRow(i);
                    CameraInfo cameraInfo = new CameraInfo();
                    cameraInfo.CameraNo = row.GetCell(1).StringCellValue.Trim();
                    cameraInfo.City = row.GetCell(2).StringCellValue.Trim();
                    cameraInfo.County = row.GetCell(3).StringCellValue.Trim();
                    cameraInfo.CameraName = row.GetCell(4).StringCellValue.Trim();
                    cameraInfo.Lng = row.GetCell(5).StringCellValue.Trim();
                    cameraInfo.Lat = row.GetCell(6).StringCellValue.Trim();
                    cameraInfo.CameraFunType = row.GetCell(7).StringCellValue.Trim();
                    cameraInfo.Region = row.GetCell(8).StringCellValue.Trim();
                    cameraInfo.Type = row.GetCell(9).StringCellValue.Trim();
                    cameraInfo.Status = row.GetCell(10).StringCellValue.Trim();
                    cameraInfo.Mac = row.GetCell(11).StringCellValue.Trim();
                    cameraInfo.Ip = row.GetCell(12).StringCellValue.Trim();
                    _cameraList.Add(cameraInfo);
                }
            }

            //過濾數據
            _cameraList = _cameraList.FindAll(cameraInfo =>
            {
                if (!string.IsNullOrWhiteSpace(cameraInfo.Lng) && !string.IsNullOrWhiteSpace(cameraInfo.Lat))
                {
                    double lng = Convert.ToDouble(cameraInfo.Lng);
                    double lat = Convert.ToDouble(cameraInfo.Lat);
                    bool bl = (bool)_engine.Invoke("calc", new object[] { lng, lat, _selectedRegionPoints });
                    if (bl) //區域內
                    {
                        return false;
                    }
                    else //區域外
                    {
                        return true;
                    }
                }
                else
                {
                    return false;
                }
            });

            saveFileDialog1.Title = "選擇處理結果要保存的位置及文件名";
            saveFileDialog1.Filter = "Excel文件(*.xlsx)|*.xlsx";
            if (saveFileDialog1.ShowDialog() == DialogResult.OK)
            {
                if (File.Exists(saveFileDialog1.FileName))
                {
                    File.Delete(saveFileDialog1.FileName);
                }
                string template = AppDomain.CurrentDomain.BaseDirectory + "點位模板.xlsx";
                XSSFWorkbook workbook;
                using (FileStream fs = new FileStream(template, FileMode.Open, FileAccess.Read, FileShare.Read))
                {
                    workbook = new XSSFWorkbook(fs);

                    using (FileStream fs2 = new FileStream(saveFileDialog1.FileName, FileMode.OpenOrCreate, FileAccess.ReadWrite))
                    {
                        ISheet sheet = workbook.GetSheetAt(0);
                        sheet.RemoveRow(sheet.GetRow(1));
                        sheet.RemoveRow(sheet.GetRow(2));
                        Dictionary<int, ICellStyle> cellStyles = GetCellStyles(sheet);
                        int i = 1;
                        foreach (CameraInfo cameraInfo in _cameraList)
                        {
                            IRow row = sheet.CreateRow(i);
                            ICell cell1 = row.CreateCell(1, CellType.String);
                            ICell cell2 = row.CreateCell(2, CellType.String);
                            ICell cell3 = row.CreateCell(3, CellType.String);
                            ICell cell4 = row.CreateCell(4, CellType.String);
                            ICell cell5 = row.CreateCell(5, CellType.String);
                            ICell cell6 = row.CreateCell(6, CellType.String);
                            ICell cell7 = row.CreateCell(7, CellType.String);
                            ICell cell8 = row.CreateCell(8, CellType.String);
                            ICell cell9 = row.CreateCell(9, CellType.String);
                            ICell cell10 = row.CreateCell(10, CellType.String);
                            ICell cell11 = row.CreateCell(11, CellType.String);
                            ICell cell12 = row.CreateCell(12, CellType.String);
                            SetCellStyles(row, cellStyles);
                            cell1.SetCellValue(cameraInfo.CameraNo);
                            cell2.SetCellValue(cameraInfo.City);
                            cell3.SetCellValue(cameraInfo.County);
                            cell4.SetCellValue(cameraInfo.CameraName);
                            cell5.SetCellValue(cameraInfo.Lng);
                            cell6.SetCellValue(cameraInfo.Lat);
                            cell7.SetCellValue(cameraInfo.CameraFunType);
                            cell8.SetCellValue(cameraInfo.Region);
                            cell9.SetCellValue(cameraInfo.Type);
                            cell10.SetCellValue(cameraInfo.Status);
                            cell11.SetCellValue(cameraInfo.Mac);
                            cell12.SetCellValue(cameraInfo.Ip);
                            i++;
                        }
                        workbook.Write(fs2);
                    }
                    MessageBox.Show("完成");
                }
            }
        }

        private Dictionary<int, ICellStyle> GetCellStyles(ISheet sheet)
        {
            var styleRow = sheet.GetRow(5);
            Dictionary<int, ICellStyle> result = new Dictionary<int, ICellStyle>();
            for (int i = 1; i <= 12; i++)
            {
                result.Add(i, styleRow.GetCell(i).CellStyle);
            }
            return result;
        }

        private void SetCellStyles(IRow row, Dictionary<int, ICellStyle> styles)
        {
            for (int i = 1; i <= 12; i++)
            {
                row.GetCell(i).CellStyle = styles[i];
            }
        }

        private void Form1_FormClosing(object sender, FormClosingEventArgs e)
        {
            _engine.Dispose();
        }

        private void button2_Click(object sender, EventArgs e)
        {
            folderBrowserDialog1.Description = "選擇模板文件保存位置";
            if (folderBrowserDialog1.ShowDialog() == DialogResult.OK)
            {
                string template = AppDomain.CurrentDomain.BaseDirectory + "點位模板.xlsx";
                string filePath = Path.Combine(folderBrowserDialog1.SelectedPath, "點位模板.xlsx");
                if (File.Exists(filePath))
                {
                    if (MessageBox.Show("模板文件已存在，是否覆蓋？", "提示", MessageBoxButtons.OKCancel) == DialogResult.OK)
                    {
                        File.Copy(template, filePath, true);
                        MessageBox.Show("下載完成");
                    }
                }
                else
                {
                    File.Copy(template, filePath, true);
                    MessageBox.Show("下載完成");
                }
            }
        }
    }
}

到此這篇關于C#調用js庫的方法小結的文章就介紹到這了,更多相關C#調用js內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: