mybatisPlus更新字段值為null的解決方案
問題描述
用Mybatis-Plus的update()或者updateById()來更新數據時,無法將字段設置為null值(更新后數據還是原來的值)。
TableField源碼
/* * Copyright (c) 2011-2020, baomidou (jobob@qq.com). * <p> * Licensed under the Apache License, Version 2.0 (the "License"); you may not * use this file except in compliance with the License. You may obtain a copy of * the License at * <p> * https://www.apache.org/licenses/LICENSE-2.0 * <p> * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations under * the License. */ package com.baomidou.mybatisplus.annotation; import org.apache.ibatis.mapping.ParameterMapping; import org.apache.ibatis.mapping.ResultMapping; import org.apache.ibatis.type.JdbcType; import org.apache.ibatis.type.TypeHandler; import org.apache.ibatis.type.UnknownTypeHandler; import java.lang.annotation.*; /** * 表字段標識 * * @author hubin sjy tantan * @since 2016-09-09 */ @Documented @Retention(RetentionPolicy.RUNTIME) @Target({ElementType.FIELD, ElementType.ANNOTATION_TYPE}) public @interface TableField { /** * 數據庫字段值, * 不需要配置該值的情況: * <li> 當 {@link com.baomidou.mybatisplus.core.MybatisConfiguration#mapUnderscoreToCamelCase} 為 true 時, * (mp下默認是true,mybatis默認是false), 數據庫字段值.replace("_","").toUpperCase() == 實體屬性名.toUpperCase() </li> * <li> 當 {@link com.baomidou.mybatisplus.core.MybatisConfiguration#mapUnderscoreToCamelCase} 為 false 時, * 數據庫字段值.toUpperCase() == 實體屬性名.toUpperCase()</li> */ String value() default ""; /** * 是否為數據庫表字段 * 默認 true 存在,false 不存在 */ boolean exist() default true; /** * 字段 where 實體查詢比較條件 * 默認 {@link SqlCondition.EQUAL} */ String condition() default ""; /** * 字段 update set 部分注入, 該注解優于 el 注解使用 * <p> * 例1:@TableField(.. , update="%s+1") 其中 %s 會填充為字段 * 輸出 SQL 為:update 表 set 字段=字段+1 where ... * <p> * 例2:@TableField(.. , update="now()") 使用數據庫時間 * 輸出 SQL 為:update 表 set 字段=now() where ... */ String update() default ""; /** * 字段驗證策略之 insert: 當insert操作時,該字段拼接insert語句時的策略 * IGNORED: 直接拼接 insert into table_a(column) values (#{columnProperty}); * NOT_NULL: insert into table_a(<if test="columnProperty != null">column</if>) values (<if test="columnProperty != null">#{columnProperty}</if>) * NOT_EMPTY: insert into table_a(<if test="columnProperty != null and columnProperty!=''">column</if>) values (<if test="columnProperty != null and columnProperty!=''">#{columnProperty}</if>) * * @since 3.1.2 */ FieldStrategy insertStrategy() default FieldStrategy.DEFAULT; /** * 字段驗證策略之 update: 當更新操作時,該字段拼接set語句時的策略 * IGNORED: 直接拼接 update table_a set column=#{columnProperty}, 屬性為null/空string都會被set進去 * NOT_NULL: update table_a set <if test="columnProperty != null">column=#{columnProperty}</if> * NOT_EMPTY: update table_a set <if test="columnProperty != null and columnProperty!=''">column=#{columnProperty}</if> * * @since 3.1.2 */ FieldStrategy updateStrategy() default FieldStrategy.DEFAULT; /** * 字段驗證策略之 where: 表示該字段在拼接where條件時的策略 * IGNORED: 直接拼接 column=#{columnProperty} * NOT_NULL: <if test="columnProperty != null">column=#{columnProperty}</if> * NOT_EMPTY: <if test="columnProperty != null and columnProperty!=''">column=#{columnProperty}</if> * * @since 3.1.2 */ FieldStrategy whereStrategy() default FieldStrategy.DEFAULT; /** * 字段自動填充策略 */ FieldFill fill() default FieldFill.DEFAULT; /** * 是否進行 select 查詢 * <p>大字段可設置為 false 不加入 select 查詢范圍</p> */ boolean select() default true; /** * 是否保持使用全局的 Format 的值 * <p> 只生效于 既設置了全局的 Format 也設置了上面 {@link #value()} 的值 </p> * <li> 如果是 false , 全局的 Format 不生效 </li> * * @since 3.1.1 */ boolean keepGlobalFormat() default false; /** * JDBC類型 (該默認值不代表會按照該值生效), * 只生效與 mp 自動注入的 method, * 建議配合 {@link TableName#autoResultMap()} 一起使用 * <p> * {@link ResultMapping#jdbcType} and {@link ParameterMapping#jdbcType} * * @since 3.1.2 */ JdbcType jdbcType() default JdbcType.UNDEFINED; /** * 類型處理器 (該默認值不代表會按照該值生效), * 只生效與 mp 自動注入的 method, * 建議配合 {@link TableName#autoResultMap()} 一起使用 * <p> * {@link ResultMapping#typeHandler} and {@link ParameterMapping#typeHandler} * * @since 3.1.2 */ Class<? extends TypeHandler> typeHandler() default UnknownTypeHandler.class; /** * 只在使用了 {@link #typeHandler()} 時判斷是否輔助追加 javaType * <p> * 一般情況下不推薦使用 * {@link ParameterMapping#javaType} * * @since 3.4.0 @2020-07-23 */ boolean javaType() default false; /** * 指定小數點后保留的位數, * 只生效與 mp 自動注入的 method, * 建議配合 {@link TableName#autoResultMap()} 一起使用 * <p> * {@link ParameterMapping#numericScale} * * @since 3.1.2 */ String numericScale() default ""; }
FieldStrategy 源碼
更新策略默認是不為Null
/* * Copyright (c) 2011-2020, baomidou (jobob@qq.com). * <p> * Licensed under the Apache License, Version 2.0 (the "License"); you may not * use this file except in compliance with the License. You may obtain a copy of * the License at * <p> * https://www.apache.org/licenses/LICENSE-2.0 * <p> * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations under * the License. */ package com.baomidou.mybatisplus.annotation; /** * 字段策略枚舉類 * <p> * 如果字段是基本數據類型則最終效果等同于 {@link #IGNORED} * * @author hubin * @since 2016-09-09 */ public enum FieldStrategy { /** * 忽略判斷 */ IGNORED, /** * 非NULL判斷 */ NOT_NULL, /** * 非空判斷(只對字符串類型字段,其他類型字段依然為非NULL判斷) */ NOT_EMPTY, /** * 默認的,一般只用于注解里 * <p>1. 在全局里代表 NOT_NULL</p> * <p>2. 在注解里代表 跟隨全局</p> */ DEFAULT, /** * 不加入 SQL */ NEVER }
設置為null的方案
使用UpdateWrapper更新
userService.lambdaUpdate() .eq(User::getId, user.getId()) .set(User::getUserName, user.getUserName()) .set(User::getNickName, null) .update();
設置全局的field-strategy(不推薦)
mybatis-plus: global-config: # 字段策略 0:忽略判斷,直接拼SQL, 1:非NULL, 2:非空,3:默認;4:永遠不加入SQL field-strategy: 0
設置某個字段的field-strategy
在實體的某個字段上設置
@ApiModelProperty(value = "所在黨組織") @TableField(updateStrategy = FieldStrategy.IGNORED) private Long partyOrgId;
更新時直接將值設置為null
staffInfo.setPartyOrgId(null)
總結
到此這篇關于mybatisPlus更新字段值為null的文章就介紹到這了,更多相關mybatisPlus更新字段值為null內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
仿釘釘流程輕松實現JSON轉BPMN完整實現過程示例
這篇文章主要為大家介紹了仿釘釘流程輕松實現JSON轉BPMN完整實現過程示例,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-08-08IntelliJ?IDEA?2023.1.4?無法刷新Maven項目模塊的問題及解決方法
這篇文章主要介紹了如何排查?IDEA?自身報錯問題,本文以IntelliJ?IDEA?2023.1.4無法刷新項目Maven模塊的問題為例,給大家詳細講解,需要的朋友可以參考下2023-08-08IDEA解決@Slf4j中l(wèi)og報紅問題
在IntelliJ IDEA中使用log.info()時,如果出現錯誤,通常是因?yàn)槿鄙貺ombok插件,以下是解決方法:打開IntelliJ IDEA,進入設置(File > Settings 或者 Ctrl+Alt+S),在Plugins部分點擊Browse repositories,搜索Lombok并安裝,安裝完成后,問題通??梢越鉀Q2024-12-12Java字節碼操縱框架ASM圖文實例詳解
這篇文章主要為大家介紹了Java字節碼操縱框架ASM圖文實例詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-07-07