欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Rust多線程Web服務器搭建過程

 更新時間：2023年04月26日 09:35:50   作者：QIAOPENGJUN  
這篇文章主要介紹了Rust多線程 Web 服務器搭建過程,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下

最后的項目：多線程 Web 服務器

構建多線程 Web 服務器

  • 在 socket 上監聽 TCP 連接
  • 解析少量的 HTTP 請求
  • 創建一個合適的 HTTP 響應
  • 使用線程池改進服務器的吞吐量
  • 優雅的停機和清理
  • 注意：并不是最佳實踐

創建項目

~/rust
? cargo new hello
     Created binary (application) `hello` package

~/rust
?

main.rs 文件

use std::net::TcpListener;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        println!("Connection established!");
    }
}

修改一：

use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        handle_connection(stream);
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    println!("Request: {}", String::from_utf8_lossy(&buffer[..]));
}

修改二：

use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        handle_connection(stream);
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    // 請求
    // Method Request-URI HTTP-Version CRLF
    // headers CRLF
    // message-body

    // 響應
    // HTTP-Version Status-Code Reason-Phrase CRLF
    // headers CRLF
    // message-body

    let response = "HTTP/1.1 200 OK\r\n\r\n";

    stream.write(response.as_bytes()).unwrap();
    stream.flush().unwrap();

    println!("Request: {}", String::from_utf8_lossy(&buffer[..]));
}

修改三：

use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        handle_connection(stream);
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    // 請求
    // Method Request-URI HTTP-Version CRLF
    // headers CRLF
    // message-body

    // 響應
    // HTTP-Version Status-Code Reason-Phrase CRLF
    // headers CRLF
    // message-body

    let contents = fs::read_to_string("hello.html").unwrap();
    let response = format!("HTTP/1.1 200 OK\r\n\r\n{}", contents);

    stream.write(response.as_bytes()).unwrap();
    stream.flush().unwrap();
}

修改四：

use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        handle_connection(stream);
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    let get = b"GET / HTTP/1.1\r\n";

    if buffer.starts_with(get) {
        let contents = fs::read_to_string("hello.html").unwrap();
        let response = format!("HTTP/1.1 200 OK\r\n\r\n{}", contents);

        stream.write(response.as_bytes()).unwrap();
        stream.flush().unwrap();
    } else {
        let status_line = "HTTP/1.1 404 NOT FOUND\r\n\r\n";
        let contents = fs::read_to_string("404.html").unwrap();

        let response = format!("{}{}", status_line, contents);

        stream.write(response.as_bytes()).unwrap();
        stream.flush().unwrap();
    }
}

修改五：

use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        handle_connection(stream);
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    let get = b"GET / HTTP/1.1\r\n";

    let (status_line, filename) = if buffer.starts_with(get) {
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else {
        ("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
    };

    let contents = fs::read_to_string(filename).unwrap();

    let response = format!("{}{}", status_line, contents);

    stream.write(response.as_bytes()).unwrap();
    stream.flush().unwrap();
}

hello.html 文件

<!DOCTYPE html>
<html lang="en">
    <head>
        <meta charset="utf-8">
        <title>Hello</title>
    </head>

    <body>
        <h1>Hello</h1>
        <p>Hi from Rust</p>
    </body>
</html>

404.html 文件

<!DOCTYPE html>
<html lang="en">
    <head>
        <meta charset="utf-8">
        <title>Hello!</title>
    </head>
    <body>
        <h1>Oops!</h1>
        <p>Sorry, I don't know what you're asking for.</p>
    </body>
</html>

單線程Web服務器

use std::fs;
use std::thread;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
use std::time::Duration;

fn main() {
    let listener = TcpListener::bind("127.0.0.1:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        handle_connection(stream);
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    let get = b"GET / HTTP/1.1\r\n";
    let sleep = b"GET /sleep HTTP/1.1\r\n";

    let (status_line, filename) = if buffer.starts_with(get) {
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else if buffer.starts_with(sleep) {
        thread::sleep(Duration::from_secs(5));
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else {
        ("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
    };

    let contents = fs::read_to_string(filename).unwrap();

    let response = format!("{}{}", status_line, contents);

    stream.write(response.as_bytes()).unwrap();
    stream.flush().unwrap();
}

開啟線程

use std::fs;
use std::thread;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
use std::time::Duration;

fn main() {
    let listener = TcpListener::bind("localhost:7878").unwrap();
    for stream in listener.incoming() {
        let stream = stream.unwrap();

        thread::spawn(|| {
            handle_connection(stream);
        });
    }
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    let get = b"GET / HTTP/1.1\r\n";
    let sleep = b"GET /sleep HTTP/1.1\r\n";

    let (status_line, filename) = if buffer.starts_with(get) {
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else if buffer.starts_with(sleep) {
        thread::sleep(Duration::from_secs(5));
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else {
        ("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
    };

    let contents = fs::read_to_string(filename).unwrap();

    let response = format!("{}{}", status_line, contents);

    stream.write(response.as_bytes()).unwrap();
    stream.flush().unwrap();
}

lib.rs 文件

use std::thread;

pub struct ThreadPool {
    threads: Vec<thread::JoinHandle<()>>,
}

impl ThreadPool {
    /// Creates a new ThreadPool.
    /// 
    /// The size is the number of threads in the pool.
    /// 
    /// # Panics
    /// 
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let mut threads = Vec::with_capacity(size);

        for _ in 0..size {
            // create some threads and store them in the vector
        }
        ThreadPool { threads }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
    }
}

lib.rs 修改一

use std::thread;

pub struct ThreadPool {
    workers: Vec<Worker>,
}

impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id));
        }
        ThreadPool { workers }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

impl Worker {
    fn new(id: usize) -> Worker {
        let thread = thread::spawn(|| {});

        Worker { id, thread }
    }
}

lib.rs 修改二

use std::thread;
use std::sync::mpsc;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

struct Job;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, receiver));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

impl Worker {
    fn new(id: usize, receiver: mpsc::Receiver<Job>) -> Worker {
        let thread = thread::spawn(|| {
            receiver;
        });

        Worker { id, thread }
    }
}

lib.rs 修改三

use std::thread;
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

struct Job;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
        let thread = thread::spawn(|| {
            receiver;
        });

        Worker { id, thread }
    }
}

lib.rs 修改四

use std::thread;
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

// struct Job;
type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
        let job = Box::new(f);
        self.sender.send(job).unwrap();
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
        let thread = thread::spawn(move || loop {
            let job = receiver.lock().unwrap().recv().unwrap();

            println!("Worker {} got a job; executing.", id);

            (*job)();
        });

        Worker { id, thread }
    }
}

lib.rs 修改五

use std::thread;
use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
        let job = Box::new(f);
        self.sender.send(job).unwrap();
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

trait FnBox {
    fn call_box(self: Box<Self>);
}

impl<F: FnOnce()> FnBox for F {
    fn call_box(self: Box<F>) {
        (*self)()
    }
}

type Job = Box<dyn FnBox + Send + 'static>;

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
        let thread = thread::spawn(move || loop {
            let job = receiver.lock().unwrap().recv().unwrap();

            println!("Worker {} got a job; executing.", id);

            // (*job)();
            job.call_box();
        });

        Worker { id, thread }
    }
}

lib.rs 修改六

use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
        let job = Box::new(f);
        self.sender.send(job).unwrap();
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

trait FnBox {
    fn call_box(self: Box<Self>);
}

impl<F: FnOnce()> FnBox for F {
    fn call_box(self: Box<F>) {
        (*self)()
    }
}

type Job = Box<dyn FnBox + Send + 'static>;

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
        let thread = thread::spawn(move || loop {
            while let Ok(job) = receiver.lock().unwrap().recv() {
                println!("Worker {} got a job; executing.", id);

                job.call_box();
            }
        });

        Worker { id, thread }
    }
}

優雅的停機和清理

use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
        let job = Box::new(f);
        self.sender.send(job).unwrap();
    }
}

impl Drop for ThreadPool {
    fn drop(&mut self) {
        for worker in &mut self.workers {
            println!("Shutting down worker {}", worker.id);

            worker.thread.join().unwrap()
        }
    }
}

struct Worker {
    id: usize,
    thread: thread::JoinHandle<()>,
}

trait FnBox {
    fn call_box(self: Box<Self>);
}

impl<F: FnOnce()> FnBox for F {
    fn call_box(self: Box<F>) {
        (*self)()
    }
}

type Job = Box<dyn FnBox + Send + 'static>;

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
        let thread = thread::spawn(move || loop {
            while let Ok(job) = receiver.lock().unwrap().recv() {
                println!("Worker {} got a job; executing.", id);

                job.call_box();
            }
        });

        Worker { id, thread }
    }
}

修改優化一：

use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Job>,
}

// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
        let job = Box::new(f);
        self.sender.send(job).unwrap();
    }
}

impl Drop for ThreadPool {
    fn drop(&mut self) {
        for worker in &mut self.workers {
            println!("Shutting down worker {}", worker.id);

            if let Some(thread) = worker.thread.take() {
                thread.join().unwrap();
            }
        }
    }
}

struct Worker {
    id: usize,
    thread: Option<thread::JoinHandle<()>>,
}

trait FnBox {
    fn call_box(self: Box<Self>);
}

impl<F: FnOnce()> FnBox for F {
    fn call_box(self: Box<F>) {
        (*self)()
    }
}

type Job = Box<dyn FnBox + Send + 'static>;

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Job>>>) -> Worker {
        let thread = thread::spawn(move || loop {
            while let Ok(job) = receiver.lock().unwrap().recv() {
                println!("Worker {} got a job; executing.", id);

                job.call_box();
            }
        });

        Worker {
            id,
            thread: Some(thread),
        }
    }
}

最終版 lib.rs 文件

use std::sync::mpsc;
use std::sync::Arc;
use std::sync::Mutex;
use std::thread;

enum Message {
    NewJob(Job),
    Terminate,
}

pub struct ThreadPool {
    workers: Vec<Worker>,
    sender: mpsc::Sender<Message>,
}

// struct Job;
// type Job = Box<FnOnce() + Send + 'static>;
impl ThreadPool {
    /// Creates a new ThreadPool.
    ///
    /// The size is the number of threads in the pool.
    ///
    /// # Panics
    ///
    /// The `new` function will panic if the size is zero.
    pub fn new(size: usize) -> ThreadPool {
        assert!(size > 0);
        let (sender, receiver) = mpsc::channel();
        let receiver = Arc::new(Mutex::new(receiver));
        let mut workers = Vec::with_capacity(size);

        for id in 0..size {
            workers.push(Worker::new(id, Arc::clone(&receiver)));
        }
        ThreadPool { workers, sender }
    }

    pub fn execute<F>(&self, f: F)
    where
        F: FnOnce() + Send + 'static,
    {
        let job = Box::new(f);
        self.sender.send(Message::NewJob(job)).unwrap();
    }
}

impl Drop for ThreadPool {
    fn drop(&mut self) {
        println!("Sending terminate message to all workers.");

        for _ in &mut self.workers {
            self.sender.send(Message::Terminate).unwrap();
        }
        println!("Shutting down all workers.");
        
        for worker in &mut self.workers {
            println!("Shutting down worker {}", worker.id);

            if let Some(thread) = worker.thread.take() {
                thread.join().unwrap();
            }
        }
    }
}

struct Worker {
    id: usize,
    thread: Option<thread::JoinHandle<()>>,
}

trait FnBox {
    fn call_box(self: Box<Self>);
}

impl<F: FnOnce()> FnBox for F {
    fn call_box(self: Box<F>) {
        (*self)()
    }
}

type Job = Box<dyn FnBox + Send + 'static>;

impl Worker {
    fn new(id: usize, receiver: Arc<Mutex<mpsc::Receiver<Message>>>) -> Worker {
        let thread = thread::spawn(move || loop {
            let message = receiver.lock().unwrap().recv().unwrap();
            match message {
                Message::NewJob(job) => {
                    println!("Worker {} got a job; executing.", id);
                    job.call_box();
                }
                Message::Terminate => {
                    println!("Worker {} got a job; executing.", id);
                    break;
                }
            }
        });

        Worker {
            id,
            thread: Some(thread),
        }
    }
}

最終版 main.rs 文件

use hello::ThreadPool;
use std::fs;
use std::io::prelude::*;
use std::net::TcpListener;
use std::net::TcpStream;
use std::thread;
use std::time::Duration;

fn main() {
    let listener = TcpListener::bind("localhost:7878").unwrap();
    let pool = ThreadPool::new(4);
    for stream in listener.incoming().take(2) {
        let stream = stream.unwrap();

        pool.execute(|| {
            handle_connection(stream);
        });
    }

    println!("Shutting down.");
}

fn handle_connection(mut stream: TcpStream) {
    let mut buffer = [0; 512];

    stream.read(&mut buffer).unwrap();

    let get = b"GET / HTTP/1.1\r\n";
    let sleep = b"GET /sleep HTTP/1.1\r\n";

    let (status_line, filename) = if buffer.starts_with(get) {
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else if buffer.starts_with(sleep) {
        thread::sleep(Duration::from_secs(5));
        ("HTTP/1.1 200 OK\r\n\r\n", "hello.html")
    } else {
        ("HTTP/1.1 404 NOT FOUND\r\n\r\n", "404.html")
    };

    let contents = fs::read_to_string(filename).unwrap();

    let response = format!("{}{}", status_line, contents);

    stream.write(response.as_bytes()).unwrap();
    stream.flush().unwrap();
}

運行

hello on  master [?] is ?? 0.1.0 via ?? 1.67.1 
? cargo run  
   Compiling hello v0.1.0 (/Users/qiaopengjun/rust/hello)
    Finished dev [unoptimized + debuginfo] target(s) in 0.43s
     Running `target/debug/hello`
Worker 0 got a job; executing.
Shutting down.
Sending terminate message to all workers.
Shutting down all workers.
Shutting down worker 0
Worker 1 got a job; executing.
Worker 2 got a job; executing.
Worker 3 got a job; executing.
Worker 1 got a job; executing.
Worker 0 got a job; executing.
Shutting down worker 1
Shutting down worker 2
Shutting down worker 3

hello on  master [?] is ?? 0.1.0 via ?? 1.67.1 took 21.9s 
?

到此這篇關于Rust多線程 Web 服務器搭建過程的文章就介紹到這了,更多相關rust多線程 Web 服務器內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

相關文章

  • Rust日期與時間的操作方法

    Rust日期與時間的操作方法

    Rust的時間操作主要用到chrono庫,接下來我將簡單選一些常用的操作進行介紹,感興趣的朋友跟隨小編一起看看吧
    2023-09-09
  • Rust處理命令行參數

    Rust處理命令行參數

    在Rust中,命令行參數是程序從命令行接收的輸入,它們?yōu)槌绦蛱峁┝诉\行時配置和數據的靈活性,本文就來介紹一下Rust處理命令行參數,具有一定的參考價值,感興趣的可以了解一下
    2024-03-03
  • 如何用Rust打印hello world

    如何用Rust打印hello world

    這篇文章主要介紹了如何用Rust打印hello world,本文分步驟通過圖文并茂的形式給大家講解的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
    2023-09-09
  • Rust遍歷 BinaryHeap的示例代碼

    Rust遍歷 BinaryHeap的示例代碼

    Rust 的 BinaryHeap 結構體實現了迭代器接口,因此你可以遍歷它,如果你想要遍歷 BinaryHeap 中的所有元素,你可以使用 .into_iter() 方法將其轉換為迭代器,并遍歷其中的元素,本文通過實例介紹Rust遍歷 BinaryHeap的相關知識,感興趣的朋友一起看看吧
    2024-04-04
  • 詳解rust?自動化測試、迭代器與閉包、智能指針、無畏并發

    詳解rust?自動化測試、迭代器與閉包、智能指針、無畏并發

    這篇文章主要介紹了rust?自動化測試、迭代器與閉包、智能指針、無畏并發,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下
    2023-11-11
  • Rust實現構建器模式和如何使用Bon庫中的構建器

    Rust實現構建器模式和如何使用Bon庫中的構建器

    這篇文章主要介紹了Rust實現構建器模式和如何使用Bon庫中的構建器,本文給大家介紹的非常詳細,感興趣的朋友跟隨小編一起看看吧
    2024-08-08
  • Rust 標準庫的結構及模塊路徑詳解

    Rust 標準庫的結構及模塊路徑詳解

    在 Rust 中,標準庫提供了一組核心功能,以幫助開發者執行常見的編程任務,這個路徑樹可以作為參考,幫助你更好地理解 Rust 標準庫的結構和模塊之間的關系,本文介紹 Rust 標準庫的結構,并提供相應的 use 路徑,感興趣的朋友一起看看吧
    2024-05-05
  • rust生命周期詳解

    rust生命周期詳解

    生命周期是rust中用來規定引用的有效作用域，在大多數時候，無需手動聲明，因為編譯器能夠自動推導，這篇文章主要介紹了rust生命周期相關知識,需要的朋友可以參考下
    2023-03-03
  • 深入探究在Rust中函數、方法和關聯函數有什么區別

    深入探究在Rust中函數、方法和關聯函數有什么區別

    在 Rust 中,函數、方法和關聯函數都是用來封裝行為的,它們之間的區別主要在于它們的定義和調用方式,本文將通過一個簡單的rust代碼示例來給大家講講Rust中函數、方法和關聯函數區別,需要的朋友可以參考下
    2023-08-08
  • vscode搭建rust開發環境的圖文教程

    vscode搭建rust開發環境的圖文教程

    Rust 是一種系統編程語言,它專注于內存安全、并發和性能,本文主要介紹了vscode搭建rust開發環境的圖文教程,具有一定的參考價值,感興趣的可以了解一下
    2024-03-03

最新評論