欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

vue2+springsecurity權限系統的實現

 更新時間:2023年05月04日 11:17:08   作者:用戶6125466032139  
本文主要介紹了vue2+springsecurity權限系統的實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧

準備內容

新建項目,SpringBoot采用2.7.11,spring-boot-starter-security,vue 2.0

默認會自動啟動攔截裝置,可以這樣取消,先這樣配置一下

@SpringBootApplication(exclude = {SecurityAutoConfiguration.class})

JWT 校驗用戶的憑證(頭部,載荷,簽證)

引入依賴

<!-- JWT -->
<dependency>
    <groupId>com.auth0</groupId>
    <artifactId>java-jwt</artifactId>
    <version>3.2.0</version>
</dependency>

邏輯:用戶登錄后,請求頭中加一個token參數,如果有則表示可以訪問,沒有就不能訪問,這是一個小測試還是有點缺陷的

SpringSecurity 權限控制

一共有兩個最主要攔截器

  • 登陸驗證攔截器AuthenticationProcessingFilter

  • 資源管理攔截器AbstractSecurityInterceptor

但攔截器里面的實現需要一些組件來實現分別是

  • AuthenticationManager認證管理器

  • accessDecisionManager決策管理器等組件來支撐。

流程圖解讀:

  • 用戶提交用戶名、密碼被SecurityFilterChain中的 UsernamePasswordAuthenticationFilter 過濾器獲取到,封裝為請求Authentication,通常情況下是UsernamePasswordAuthenticationToken這個實 現類。

  • 然后過濾器將Authentication提交至認證管理器(AuthenticationManager)進行認證 。

  • 認證成功后, AuthenticationManager 身份管理器返回一個被填充滿了信息的(包括上面提到的權 限信息, 身份信息,細節信息,但密碼通常會被移除) Authentication 實例。

  • SecurityContextHolder 安全上下文容器將第3步填充了信息的 Authentication
    通過 SecurityContextHolder.getContext().setAuthentication(…)方法,設置到其中。 可以看出 AuthenticationManager接口(認證管理器)是認證相關的核心接口,也是發起認證的出發點,它的實 現類為ProviderManager。而Spring Security支持多種認證方式,因此ProviderManager維護著一個 List 列表,存放多種認證方式,最終實際的認證工作是由 AuthenticationProvider完成的。咱們知道 web表單的對應的AuthenticationProvider實現類為 DaoAuthenticationProvider,它的內部又維護著 一個UserDetailsService負責UserDetails的獲取。最終 AuthenticationProvider將UserDetails填充至 Authentication。

現在關掉之前的SecurityAutoConfiguration.class,打開是不是直接跳轉到了登錄頁面呢,無法訪問接口了

配置 SpringSecurity

先說下創建token的工具類

/**
 * 簽發JWT
 *
 * @param id 用戶ID
 * @param subject   可以是JSON數據 盡可能少
 * @param ttlMillis 不知道
 * @return 結果
 */
public static String createJWT(String id, String subject, long ttlMillis) {
    SignatureAlgorithm signatureAlgorithm = SignatureAlgorithm.HS256;
    // 獲取當前時間毫秒
    long nowMillis = System.currentTimeMillis();
    // 獲取當前時間日期類型
    Date now = new Date(nowMillis);
    // 生成一個加密的key
    SecretKey secretKey = generalKey();
    JwtBuilder builder = Jwts.builder()
            .setId(id)
            .setSubject(subject)   // 主題
            .setIssuer("ChiHaiKeJi2016")     // 簽發者
            .setIssuedAt(now)   // 簽發時間
            .signWith(signatureAlgorithm, secretKey); // 簽名算法以及密匙
    if (ttlMillis >= 0) {
        long expMillis = nowMillis + ttlMillis;
        Date expDate = new Date(expMillis);
        builder.setExpiration(expDate); // 過期時間
    }
    return builder.compact();
}
/**
 * 生成jwt token
 * @param username 用戶名
 */
public static String genJwtToken(String username) {
    return createJWT(username, username, 60 * 60 * 1000);
}
/**
 * 生成加密Key
 */
public static SecretKey generalKey() {
    // 目前只知道這個方法生成一個key,并用base64解碼
    byte[] encodedKey = Base64.decode(JwtConstant.JWT_SECERT);
    // 目前不知道啥意思
    return new SecretKeySpec(encodedKey, 0, encodedKey.length, "AES");
}

配置信息--新建SecurityConfig

@Configuration
@EnableWebSecurity
@EnableGlobalMethodSecurity(prePostEnabled = true)
public class SecurityConfig {
    // 白名單
    private static final String[] URL_WHITE_LIST = {"/login"};
    @Resource
    private LoginHandler loginHandler;
    // 密碼加密方式
    @Bean
    protected PasswordEncoder passwordEncoder() {
        return new BCryptPasswordEncoder();
    }
    @Bean
    protected SecurityFilterChain filterChain(HttpSecurity httpSecurity) throws Exception {
        // 開啟跨域 以及csrf攻擊關閉
        httpSecurity.cors().and().csrf().disable()
                // 登錄登出配置
                .formLogin()
                // 登錄成功接口
                .successHandler(loginHandler)
                // 登錄失敗的接口
                .failureHandler(loginHandler)
//                .and().logout().logoutSuccessHandler()
                // session禁用配置
                .and().sessionManagement().sessionCreationPolicy(SessionCreationPolicy.STATELESS) // 無狀態,前后端分離
                // 攔截規則配置 // // 白名單內容放行
                .and().authorizeRequests().antMatchers(URL_WHITE_LIST).permitAll()
                // 需要認證
                .anyRequest().authenticated();
        return httpSecurity.build();
    }
}

配置登錄失敗與成功接口---新建---LoginHandler 處理類

/**
 * 登錄成功與失敗處理器
 */
@Component
public class LoginHandler implements AuthenticationSuccessHandler, AuthenticationFailureHandler {
    // 登錄成功的
    @Override
    public void onAuthenticationSuccess(HttpServletRequest request, HttpServletResponse response, Authentication authentication) throws IOException, ServletException {
        response.setContentType("application/json;charset=UTF-8");
        ServletOutputStream stream = response.getOutputStream();
        // 獲取token
        String token = JwtUtils.genJwtToken("user");
        // 寫入數據
        stream.write(JSONUtil.toJsonStr(new Result("登錄成功", token)).getBytes());
        stream.flush();
        stream.close();
    }
    // 登錄失敗的
    @Override
    public void onAuthenticationFailure(HttpServletRequest request, HttpServletResponse response, AuthenticationException exception) throws IOException, ServletException {
        response.setContentType("application/json;charset=UTF-8");
        ServletOutputStream stream = response.getOutputStream();
        String message = exception.getMessage();
        if (exception instanceof BadCredentialsException) {
            message = "用戶名或者密碼錯誤!";
        }
        stream.write(JSONUtil.toJsonStr(new Result(message)).getBytes(StandardCharsets.UTF_8));
        stream.flush();
        stream.close();
    }
}

在用戶service實現類中自定義查詢數據庫

@Service
public class SysUserServiceImpl implements SysUserService, UserDetailsService {
    @Resource
    private SysUserMapper sysUserMapper;
    // 自定義查詢參數是用戶名
    @Override
    public UserDetails loadUserByUsername(String username) throws UsernameNotFoundException {
        LambdaQueryWrapper<SysUser> sysUserLambdaQueryWrapper = new LambdaQueryWrapper<>();
        sysUserLambdaQueryWrapper.eq(SysUser::getUsername, username);
        SysUser user = sysUserMapper.selectOne(sysUserLambdaQueryWrapper);
        if (user == null) {
            throw new UsernameNotFoundException("用戶名或密碼錯誤!");
        } else if ("1".equals(user.getStatus())) {
            throw new UsernameNotFoundException("該用戶已被封禁!");
        }
        // 第三個是擁有權限
        return new User(user.getUsername(), user.getPassword(), getUserAuthority());
    }
    // 權限
    private List<GrantedAuthority> getUserAuthority() {
        return new ArrayList<>();
    }
}

再來說下前端,先配置跨域

module.exports = {
  devServer: {
    host: '0.0.0.0', // 可以忽略不寫
    port: 8080, // 它是用來修改你打開后的端口號的
    open: true, // 值為 true的話,項目啟動時自動打開到瀏覽器里邊, false不會打開
    proxy: {
      '/api': {
        target: 'http://localhost:82', // 跨域請求的公共地址
        ws: false, // 也可以忽略不寫,不寫不會影響跨域
        changeOrigin: true, // 是否開啟跨域,值為 true 就是開啟, false 不開啟
        pathRewrite: {
          '^/api': ''// 注冊全局路徑, 但是在你請求的時候前面需要加上 /api
        }
      }
    }
  }
}

配置axios,因?yàn)榕渲昧丝缬?,這個時候可以直接寫api了

import axios from 'axios'
const request = axios.create({
  baseURL: '/api' // 因?yàn)榕渲每缬蛄?
})
// 下面這是攔截器,攔截請求,自動加token令牌
request.interceptors.request.use(
  config => {
    config.headers.token = `${localStorage.getItem('token')}`
    return config
  }
)
export default request

說下如何請求前端登錄接口POST請求
    登錄接口就是login,傳入username和password就可以了

export const Login = function (data) {
  return request({
    method: 'post',
    url: 'login',
    data: qs.stringify(data)
  })
}

到此這篇關于vue2+springsecurity權限系統的實現的文章就介紹到這了,更多相關vue springsecurity權限內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!

相關文章

  • vue微信分享 vue實現當前頁面分享其他頁面

    vue微信分享 vue實現當前頁面分享其他頁面

    這篇文章主要為大家詳細介紹了vue微信分享功能,vue實現當前頁面分享其他頁面,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2017-12-12
  • Vue Cli項目重構為Vite的方法步驟

    Vue Cli項目重構為Vite的方法步驟

    本文主要介紹了Vue Cli項目重構為Vite的方法步驟,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2023-04-04
  • vue3.0響應式函數原理詳細

    vue3.0響應式函數原理詳細

    這篇文章主要介紹了vue3.0響應式函數原理,Vue3的響應式系統可以監聽動態添加的屬性還可以監聽屬性的刪除操作,以及數組的索引以及l(fā)ength屬性的修改操作。另外Vue3的響應式系統還可以作為模塊單獨使用。下面更多介紹,需要的小伙伴可以才可以參考一下
    2022-02-02
  • vue2.0 實現富文本編輯器功能

    vue2.0 實現富文本編輯器功能

    這篇文章主要介紹了vue2.0 實現富文本編輯器功能,本文給大家介紹的非常詳細,具有一定的參考借鑒價值 ,需要的朋友可以參考下
    2019-05-05
  • 詳解vue生命周期

    詳解vue生命周期

    這篇文章主要為大家介紹了vue的生命周期,具有一定的參考價值,感興趣的小伙伴們可以參考一下,希望能夠給你帶來幫助
    2021-11-11
  • vue中監聽input框獲取焦點及失去焦點的問題

    vue中監聽input框獲取焦點及失去焦點的問題

    這篇文章主要介紹了vue中監聽input框獲取焦點,失去焦點的問題,本文給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下
    2022-07-07
  • Vue使用NPM方式搭建項目

    Vue使用NPM方式搭建項目

    這篇文章主要介紹了Vue項目搭建過程,使用NPM方式搭建的,本文分步驟給大家介紹的非常詳細,具有一定的參考借鑒價值 ,需要的朋友可以參考下
    2018-10-10
  • vue中v-mode詳解及使用示例詳解

    vue中v-mode詳解及使用示例詳解

    這篇文章主要介紹了vue中v-mode詳解以及具體的使用示例,在組件中使用?v-model?時,需要定義model選項,指定綁定的prop和事件,本文結合實例代碼給大家介紹的非常詳細,需要的朋友可以參考下
    2024-03-03
  • vue.js與后臺數據交互的實例講解

    vue.js與后臺數據交互的實例講解

    今天小編就為大家分享一篇vue.js與后臺數據交互的實例講解,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧
    2018-08-08
  • vue使用less報錯:Inline JavaScript is not enabled問題

    vue使用less報錯:Inline JavaScript is not ena

    這篇文章主要介紹了vue使用less報錯:Inline JavaScript is not enabled問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
    2024-01-01

最新評論