Android之帶group指示器的ExpandableListView(自寫)
更新時間:2013年06月14日 15:03:17 作者:
Android缺省的ExpandableListView的group header無法固定在界面上,在網上搜索了好多都不盡人意,于是乎在別人的基礎上改進了一點點,原理都差不多
我們都知道Android缺省的ExpandableListView的group header無法固定在界面上,當向下滾動后,不能對當前顯示的那些child 指示出它們歸屬于哪個group,在網上搜了很多關于仿手機QQ好友分組效果的ExpandableListView,發現都不盡如意,于是乎在別人的基礎上改進了一點點,其實原理還是差不多的,只是增加了往上擠出去的動畫效果,而且更加簡單,只不過還是沒有完全到達跟QQ一樣的效果,希望有高手能實現更加逼真的效果,下面我們先看看效果圖:
我這里沒有把ExpandableListView獨立出來形成一個新的控件,跟網上很多朋友一樣,監聽OnScrollListener事件,當group不是在第一個位置時,就把我們頭部的那個indicator顯示出來,并且讓它的view跟當前child所在group的view一樣的,然后再增加一個點擊關閉組的事件,即達到了簡單的仿QQ好友分組的效果。
下面我們先來看看主要的布局文件:main.xml,下面那個topGroup的FrameLayout就是我們的指示器。
<?xml version="1.0" encoding="utf-8"?>
<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent" >
<ExpandableListView
android:id="@+id/expandableListView"
android:layout_width="match_parent"
android:layout_height="match_parent" >
</ExpandableListView>
<FrameLayout
android:id="@+id/topGroup"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:orientation="vertical" >
</FrameLayout>
</FrameLayout>
其中最重要的是下面這部分:我們監聽onSroll這個接口事件,當ListView在滑動時,做相應的處理,代碼中注釋比較多,我這里就不多作說明了。
/**
* here is very importance for indicator group
*/
public void onScroll(AbsListView view, int firstVisibleItem,
int visibleItemCount, int totalItemCount) {
final ExpandableListView listView = (ExpandableListView) view;
/**
* calculate point (0,0)
*/
int npos = view.pointToPosition(0, 0);// 其實就是firstVisibleItem
if (npos == AdapterView.INVALID_POSITION)// 如果第一個位置值無效
return;
long pos = listView.getExpandableListPosition(npos);
int childPos = ExpandableListView.getPackedPositionChild(pos);// 獲取第一行child的id
int groupPos = ExpandableListView.getPackedPositionGroup(pos);// 獲取第一行g(shù)roup的id
if (childPos == AdapterView.INVALID_POSITION) {// 第一行不是顯示child,就是group,此時沒必要顯示指示器
View groupView = listView.getChildAt(npos
- listView.getFirstVisiblePosition());// 第一行的view
indicatorGroupHeight = groupView.getHeight();// 獲取group的高度
indicatorGroup.setVisibility(View.GONE);// 隱藏指示器
} else {
indicatorGroup.setVisibility(View.VISIBLE);// 滾動到第一行是child,就顯示指示器
}
// get an error data, so return now
if (indicatorGroupHeight == 0) {
return;
}
// update the data of indicator group view
if (groupPos != indicatorGroupId) {// 如果指示器顯示的不是當前group
mAdapter.getGroupView(groupPos, listView.isGroupExpanded(groupPos),
indicatorGroup.getChildAt(0), null);// 將指示器更新為當前group
indicatorGroupId = groupPos;
Log.e(TAG, PRE + "bind to new group,group position = " + groupPos);
// mAdapter.hideGroup(indicatorGroupId); // we set this group view
// to be hided
// 為此指示器增加點擊事件
indicatorGroup.setOnClickListener(new OnClickListener() {
public void onClick(View v) {
// TODO Auto-generated method stub
listView.collapseGroup(indicatorGroupId);
}
});
}
if (indicatorGroupId == -1) // 如果此時grop的id無效,則返回
return;
/**
* calculate point (0,indicatorGroupHeight) 下面是形成往上推出的效果
*/
int showHeight = indicatorGroupHeight;
int nEndPos = listView.pointToPosition(0, indicatorGroupHeight);// 第二個item的位置
if (nEndPos == AdapterView.INVALID_POSITION)// 如果無效直接返回
return;
long pos2 = listView.getExpandableListPosition(nEndPos);
int groupPos2 = ExpandableListView.getPackedPositionGroup(pos2);// 獲取第二個group的id
if (groupPos2 != indicatorGroupId) {// 如果不等于指示器當前的group
View viewNext = listView.getChildAt(nEndPos
- listView.getFirstVisiblePosition());
showHeight = viewNext.getTop();
Log.e(TAG, PRE + "update the show part height of indicator group:"
+ showHeight);
}
// update group position
MarginLayoutParams layoutParams = (MarginLayoutParams) indicatorGroup
.getLayoutParams();
layoutParams.topMargin = -(indicatorGroupHeight - showHeight);
indicatorGroup.setLayoutParams(layoutParams);
}
本文源碼下載
最后跟大家分享一下另外一個仿iPhone通訊錄效果的代碼。它是ListView的擴展,效果最好。希望有高手能把ExpandableListView擴展成一樣的效果。
源碼下載

我這里沒有把ExpandableListView獨立出來形成一個新的控件,跟網上很多朋友一樣,監聽OnScrollListener事件,當group不是在第一個位置時,就把我們頭部的那個indicator顯示出來,并且讓它的view跟當前child所在group的view一樣的,然后再增加一個點擊關閉組的事件,即達到了簡單的仿QQ好友分組的效果。
下面我們先來看看主要的布局文件:main.xml,下面那個topGroup的FrameLayout就是我們的指示器。
復制代碼 代碼如下:
<?xml version="1.0" encoding="utf-8"?>
<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent" >
<ExpandableListView
android:id="@+id/expandableListView"
android:layout_width="match_parent"
android:layout_height="match_parent" >
</ExpandableListView>
<FrameLayout
android:id="@+id/topGroup"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:orientation="vertical" >
</FrameLayout>
</FrameLayout>
其中最重要的是下面這部分:我們監聽onSroll這個接口事件,當ListView在滑動時,做相應的處理,代碼中注釋比較多,我這里就不多作說明了。
復制代碼 代碼如下:
/**
* here is very importance for indicator group
*/
public void onScroll(AbsListView view, int firstVisibleItem,
int visibleItemCount, int totalItemCount) {
final ExpandableListView listView = (ExpandableListView) view;
/**
* calculate point (0,0)
*/
int npos = view.pointToPosition(0, 0);// 其實就是firstVisibleItem
if (npos == AdapterView.INVALID_POSITION)// 如果第一個位置值無效
return;
long pos = listView.getExpandableListPosition(npos);
int childPos = ExpandableListView.getPackedPositionChild(pos);// 獲取第一行child的id
int groupPos = ExpandableListView.getPackedPositionGroup(pos);// 獲取第一行g(shù)roup的id
if (childPos == AdapterView.INVALID_POSITION) {// 第一行不是顯示child,就是group,此時沒必要顯示指示器
View groupView = listView.getChildAt(npos
- listView.getFirstVisiblePosition());// 第一行的view
indicatorGroupHeight = groupView.getHeight();// 獲取group的高度
indicatorGroup.setVisibility(View.GONE);// 隱藏指示器
} else {
indicatorGroup.setVisibility(View.VISIBLE);// 滾動到第一行是child,就顯示指示器
}
// get an error data, so return now
if (indicatorGroupHeight == 0) {
return;
}
// update the data of indicator group view
if (groupPos != indicatorGroupId) {// 如果指示器顯示的不是當前group
mAdapter.getGroupView(groupPos, listView.isGroupExpanded(groupPos),
indicatorGroup.getChildAt(0), null);// 將指示器更新為當前group
indicatorGroupId = groupPos;
Log.e(TAG, PRE + "bind to new group,group position = " + groupPos);
// mAdapter.hideGroup(indicatorGroupId); // we set this group view
// to be hided
// 為此指示器增加點擊事件
indicatorGroup.setOnClickListener(new OnClickListener() {
public void onClick(View v) {
// TODO Auto-generated method stub
listView.collapseGroup(indicatorGroupId);
}
});
}
if (indicatorGroupId == -1) // 如果此時grop的id無效,則返回
return;
/**
* calculate point (0,indicatorGroupHeight) 下面是形成往上推出的效果
*/
int showHeight = indicatorGroupHeight;
int nEndPos = listView.pointToPosition(0, indicatorGroupHeight);// 第二個item的位置
if (nEndPos == AdapterView.INVALID_POSITION)// 如果無效直接返回
return;
long pos2 = listView.getExpandableListPosition(nEndPos);
int groupPos2 = ExpandableListView.getPackedPositionGroup(pos2);// 獲取第二個group的id
if (groupPos2 != indicatorGroupId) {// 如果不等于指示器當前的group
View viewNext = listView.getChildAt(nEndPos
- listView.getFirstVisiblePosition());
showHeight = viewNext.getTop();
Log.e(TAG, PRE + "update the show part height of indicator group:"
+ showHeight);
}
// update group position
MarginLayoutParams layoutParams = (MarginLayoutParams) indicatorGroup
.getLayoutParams();
layoutParams.topMargin = -(indicatorGroupHeight - showHeight);
indicatorGroup.setLayoutParams(layoutParams);
}
本文源碼下載
最后跟大家分享一下另外一個仿iPhone通訊錄效果的代碼。它是ListView的擴展,效果最好。希望有高手能把ExpandableListView擴展成一樣的效果。
源碼下載
您可能感興趣的文章:
- Android ViewPager小圓點指示器
- Android實現引導頁的圓點指示器
- Android之IphoneTreeView帶組指示器的ExpandableListView效果
- Android TabLayout設置指示器寬度的方法
- Android實現仿網易新聞的頂部導航指示器
- Android自定義ViewPagerIndicator實現炫酷導航欄指示器(ViewPager+Fragment)
- Android實現基于ViewPager的無限循環自動播放帶指示器的輪播圖CarouselFigureView控件
- Android開發實現的ViewPager引導頁功能(動態加載指示器)詳解
- Android progressbar實現帶底部指示器和文字的進度條
- Android自定義圓點指示器
相關文章
Android ListView自定義Adapter實現仿QQ界面
這篇文章主要為大家詳細介紹了ListView自定義Adapter實現仿QQ界面,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-10-10Android仿滴滴出行驗證碼輸入框功能實例代碼
最近項目經理交給我們組一個類似滴滴出行填寫驗證碼的彈框功能,拿到這個項目需求真是把我忙暈了,下面通過本文給大家分享Android仿滴滴出行驗證碼輸入框功能實例代碼,需要的朋友參考下吧2017-12-12Kotlin + Flow 實現Android 應用初始化任務啟動庫
這篇文章主要介紹了Kotlin + Flow 實現Android 應用初始化任務啟動庫的方法,幫助大家更好的理解和學習使用Android,感興趣的朋友可以了解下2021-03-03Android 解決WebView多進程崩潰的方法
這篇文章主要介紹了Android 解決WebView多進程崩潰的方法,幫助大家更好的理解和學習使用Android開發,感興趣的朋友可以了解下2021-03-03Android下的CMD命令之關機重啟及重啟recovery
這篇文章主要介紹了Android下的CMD命令之關機重啟及重啟recovery,本文涉及到cmd命令知識點,通過了解cmd命令就可以很容易的實現此功能了,需要的朋友一起看看吧2016-08-08