C#中通過API實現的打印類 實例代碼
using System;
using System.Collections;
using System.Text;
using System.Runtime.InteropServices;
using System.Security;
using System.ComponentModel;
using System.Drawing.Printing;
namespace PrinterAPI
{
public class Printer
{
private Printer()
{
}
///泥人張版本加強版
#region API聲明
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Auto)]
internal struct structPrinterDefaults
{
[MarshalAs(UnmanagedType.LPTStr)]
public String pDatatype;
public IntPtr pDevMode;
[MarshalAs(UnmanagedType.I4)]
public int DesiredAccess;
};
[DllImport("winspool.Drv", EntryPoint = "OpenPrinter", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = false, CallingConvention = CallingConvention.StdCall),
SuppressUnmanagedCodeSecurityAttribute()]
internal static extern bool OpenPrinter([MarshalAs(UnmanagedType.LPTStr)]
string printerName,
out IntPtr phPrinter,
ref structPrinterDefaults pd);
[DllImport("winspool.Drv", EntryPoint = "ClosePrinter", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = false,
CallingConvention = CallingConvention.StdCall), SuppressUnmanagedCodeSecurityAttribute()]
internal static extern bool ClosePrinter(IntPtr phPrinter);
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Auto)]
internal struct structSize
{
public Int32 width;
public Int32 height;
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Auto)]
internal struct structRect
{
public Int32 left;
public Int32 top;
public Int32 right;
public Int32 bottom;
}
[StructLayout(LayoutKind.Explicit, CharSet = CharSet.Unicode)]
internal struct FormInfo1
{
[FieldOffset(0), MarshalAs(UnmanagedType.I4)]
public uint Flags;
[FieldOffset(4), MarshalAs(UnmanagedType.LPWStr)]
public String pName;
[FieldOffset(8)]
public structSize Size;
[FieldOffset(16)]
public structRect ImageableArea;
};
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi)]
internal struct structDevMode
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public String
dmDeviceName;
[MarshalAs(UnmanagedType.U2)]
public short dmSpecVersion;
[MarshalAs(UnmanagedType.U2)]
public short dmDriverVersion;
[MarshalAs(UnmanagedType.U2)]
public short dmSize;
[MarshalAs(UnmanagedType.U2)]
public short dmDriverExtra;
[MarshalAs(UnmanagedType.U4)]
public int dmFields;
[MarshalAs(UnmanagedType.I2)]
public short dmOrientation;
[MarshalAs(UnmanagedType.I2)]
public short dmPaperSize;
[MarshalAs(UnmanagedType.I2)]
public short dmPaperLength;
[MarshalAs(UnmanagedType.I2)]
public short dmPaperWidth;
[MarshalAs(UnmanagedType.I2)]
public short dmScale;
[MarshalAs(UnmanagedType.I2)]
public short dmCopies;
[MarshalAs(UnmanagedType.I2)]
public short dmDefaultSource;
[MarshalAs(UnmanagedType.I2)]
public short dmPrintQuality;
[MarshalAs(UnmanagedType.I2)]
public short dmColor;
[MarshalAs(UnmanagedType.I2)]
public short dmDuplex;
[MarshalAs(UnmanagedType.I2)]
public short dmYResolution;
[MarshalAs(UnmanagedType.I2)]
public short dmTTOption;
[MarshalAs(UnmanagedType.I2)]
public short dmCollate;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
public String dmFormName;
[MarshalAs(UnmanagedType.U2)]
public short dmLogPixels;
[MarshalAs(UnmanagedType.U4)]
public int dmBitsPerPel;
[MarshalAs(UnmanagedType.U4)]
public int dmPelsWidth;
[MarshalAs(UnmanagedType.U4)]
public int dmPelsHeight;
[MarshalAs(UnmanagedType.U4)]
public int dmNup;
[MarshalAs(UnmanagedType.U4)]
public int dmDisplayFrequency;
[MarshalAs(UnmanagedType.U4)]
public int dmICMMethod;
[MarshalAs(UnmanagedType.U4)]
public int dmICMIntent;
[MarshalAs(UnmanagedType.U4)]
public int dmMediaType;
[MarshalAs(UnmanagedType.U4)]
public int dmDitherType;
[MarshalAs(UnmanagedType.U4)]
public int dmReserved1;
[MarshalAs(UnmanagedType.U4)]
public int dmReserved2;
}
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Auto)]
internal struct PRINTER_INFO_9
{
public IntPtr pDevMode;
}
[DllImport("winspool.Drv", EntryPoint = "AddFormW", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = true,
CallingConvention = CallingConvention.StdCall), SuppressUnmanagedCodeSecurityAttribute()]
internal static extern bool AddForm(
IntPtr phPrinter,
[MarshalAs(UnmanagedType.I4)] int level,
ref FormInfo1 form);
[DllImport("winspool.Drv", EntryPoint = "DeleteForm", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = false, CallingConvention = CallingConvention.StdCall),
SuppressUnmanagedCodeSecurityAttribute()]
internal static extern bool DeleteForm(
IntPtr phPrinter,
[MarshalAs(UnmanagedType.LPTStr)] string pName);
[DllImport("kernel32.dll", EntryPoint = "GetLastError", SetLastError = false,
ExactSpelling = true, CallingConvention = CallingConvention.StdCall),
SuppressUnmanagedCodeSecurityAttribute()]
internal static extern Int32 GetLastError();
[DllImport("GDI32.dll", EntryPoint = "CreateDC", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = false,
CallingConvention = CallingConvention.StdCall),
SuppressUnmanagedCodeSecurityAttribute()]
internal static extern IntPtr CreateDC([MarshalAs(UnmanagedType.LPTStr)]
string pDrive,
[MarshalAs(UnmanagedType.LPTStr)] string pName,
[MarshalAs(UnmanagedType.LPTStr)] string pOutput,
ref structDevMode pDevMode);
[DllImport("GDI32.dll", EntryPoint = "ResetDC", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = false,
CallingConvention = CallingConvention.StdCall),
SuppressUnmanagedCodeSecurityAttribute()]
internal static extern IntPtr ResetDC(
IntPtr hDC,
ref structDevMode
pDevMode);
[DllImport("GDI32.dll", EntryPoint = "DeleteDC", SetLastError = true,
CharSet = CharSet.Unicode, ExactSpelling = false,
CallingConvention = CallingConvention.StdCall),
SuppressUnmanagedCodeSecurityAttribute()]
internal static extern bool DeleteDC(IntPtr hDC);
[DllImport("winspool.Drv", EntryPoint = "SetPrinterA", SetLastError = true,
CharSet = CharSet.Auto, ExactSpelling = true,
CallingConvention = CallingConvention.StdCall), SuppressUnmanagedCodeSecurityAttribute()]
internal static extern bool SetPrinter(
IntPtr hPrinter,
[MarshalAs(UnmanagedType.I4)] int level,
IntPtr pPrinter,
[MarshalAs(UnmanagedType.I4)] int command);
[DllImport("winspool.Drv", EntryPoint = "DocumentPropertiesA", SetLastError = true,
ExactSpelling = true, CallingConvention = CallingConvention.StdCall)]
internal static extern int DocumentProperties(
IntPtr hwnd,
IntPtr hPrinter,
[MarshalAs(UnmanagedType.LPStr)] string pDeviceName,
IntPtr pDevModeOutput,
IntPtr pDevModeInput,
int fMode
);
[DllImport("winspool.Drv", EntryPoint = "GetPrinterA", SetLastError = true,
ExactSpelling = true, CallingConvention = CallingConvention.StdCall)]
internal static extern bool GetPrinter(
IntPtr hPrinter,
int dwLevel,
IntPtr pPrinter,
int dwBuf,
out int dwNeeded
);
[Flags]
internal enum SendMessageTimeoutFlags : uint
{
SMTO_NORMAL = 0x0000,
SMTO_BLOCK = 0x0001,
SMTO_ABORTIFHUNG = 0x0002,
SMTO_NOTIMEOUTIFNOTHUNG = 0x0008
}
const int WM_SETTINGCHANGE = 0x001A;
const int HWND_BROADCAST = 0xffff;
[DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)]
internal static extern IntPtr SendMessageTimeout(
IntPtr windowHandle,
uint Msg,
IntPtr wParam,
IntPtr lParam,
SendMessageTimeoutFlags flags,
uint timeout,
out IntPtr result
);
//EnumPrinters用到的函數和結構體
[DllImport("winspool.drv", CharSet = CharSet.Auto, SetLastError = true)]
private static extern bool EnumPrinters(PrinterEnumFlags Flags, string Name, uint Level,
IntPtr pPrinterEnum, uint cbBuf,
ref uint pcbNeeded, ref uint pcReturned);
[StructLayout(LayoutKind.Sequential)]
internal struct PRINTER_INFO_2
{
public string pServerName;
public string pPrinterName;
public string pShareName;
public string pPortName;
public string pDriverName;
public string pComment;
public string pLocation;
public IntPtr pDevMode;
public string pSepFile;
public string pPrintProcessor;
public string pDatatype;
public string pParameters;
public IntPtr pSecurityDescriptor;
public uint Attributes;
public uint Priority;
public uint DefaultPriority;
public uint StartTime;
public uint UntilTime;
public uint Status;
public uint cJobs;
public uint AveragePPM;
}
[FlagsAttribute]
internal enum PrinterEnumFlags
{
PRINTER_ENUM_DEFAULT = 0x00000001,
PRINTER_ENUM_LOCAL = 0x00000002,
PRINTER_ENUM_CONNECTIONS = 0x00000004,
PRINTER_ENUM_FAVORITE = 0x00000004,
PRINTER_ENUM_NAME = 0x00000008,
PRINTER_ENUM_REMOTE = 0x00000010,
PRINTER_ENUM_SHARED = 0x00000020,
PRINTER_ENUM_NETWORK = 0x00000040,
PRINTER_ENUM_EXPAND = 0x00004000,
PRINTER_ENUM_CONTAINER = 0x00008000,
PRINTER_ENUM_ICONMASK = 0x00ff0000,
PRINTER_ENUM_ICON1 = 0x00010000,
PRINTER_ENUM_ICON2 = 0x00020000,
PRINTER_ENUM_ICON3 = 0x00040000,
PRINTER_ENUM_ICON4 = 0x00080000,
PRINTER_ENUM_ICON5 = 0x00100000,
PRINTER_ENUM_ICON6 = 0x00200000,
PRINTER_ENUM_ICON7 = 0x00400000,
PRINTER_ENUM_ICON8 = 0x00800000,
PRINTER_ENUM_HIDE = 0x01000000
}
//打印機狀態
[FlagsAttribute]
internal enum PrinterStatus
{
PRINTER_STATUS_BUSY = 0x00000200,
PRINTER_STATUS_DOOR_OPEN = 0x00400000,
PRINTER_STATUS_ERROR = 0x00000002,
PRINTER_STATUS_INITIALIZING = 0x00008000,
PRINTER_STATUS_IO_ACTIVE = 0x00000100,
PRINTER_STATUS_MANUAL_FEED = 0x00000020,
PRINTER_STATUS_NO_TONER = 0x00040000,
PRINTER_STATUS_NOT_AVAILABLE = 0x00001000,
PRINTER_STATUS_OFFLINE = 0x00000080,
PRINTER_STATUS_OUT_OF_MEMORY = 0x00200000,
PRINTER_STATUS_OUTPUT_BIN_FULL = 0x00000800,
PRINTER_STATUS_PAGE_PUNT = 0x00080000,
PRINTER_STATUS_PAPER_JAM = 0x00000008,
PRINTER_STATUS_PAPER_OUT = 0x00000010,
PRINTER_STATUS_PAPER_PROBLEM = 0x00000040,
PRINTER_STATUS_PAUSED = 0x00000001,
PRINTER_STATUS_PENDING_DELETION = 0x00000004,
PRINTER_STATUS_PRINTING = 0x00000400,
PRINTER_STATUS_PROCESSING = 0x00004000,
PRINTER_STATUS_TONER_LOW = 0x00020000,
PRINTER_STATUS_USER_INTERVENTION = 0x00100000,
PRINTER_STATUS_WAITING = 0x20000000,
PRINTER_STATUS_WARMING_UP = 0x00010000
}
//GetDefaultPrinter用到的API函數說明
[DllImport("winspool.drv", CharSet = CharSet.Auto, SetLastError = true)]
internal static extern bool GetDefaultPrinter(StringBuilder pszBuffer, ref int size);
//SetDefaultPrinter用到的API函數聲明
[DllImport("winspool.drv", CharSet = CharSet.Auto, SetLastError = true)]
internal static extern bool SetDefaultPrinter(string Name);
//EnumFormsA用到的函數聲明，應該和EnumPrinters類似
[DllImport("winspool.drv", EntryPoint = "EnumForms")]
internal static extern int EnumFormsA(IntPtr hPrinter, int Level, ref byte pForm, int cbBuf, ref int pcbNeeded, ref int pcReturned);
#endregion API聲明
internal static int GetPrinterStatusInt(string PrinterName)
{
int intRet = 0;
IntPtr hPrinter;
structPrinterDefaults defaults = new structPrinterDefaults();
if (OpenPrinter(PrinterName, out hPrinter, ref defaults))
{
int cbNeeded = 0;
bool bolRet = GetPrinter(hPrinter, 2, IntPtr.Zero, 0, out cbNeeded);
if (cbNeeded > 0)
{
IntPtr pAddr = Marshal.AllocHGlobal((int)cbNeeded);
bolRet = GetPrinter(hPrinter, 2, pAddr, cbNeeded, out cbNeeded);
if (bolRet)
{
PRINTER_INFO_2 Info2 = new PRINTER_INFO_2();
Info2 = (PRINTER_INFO_2)Marshal.PtrToStructure(pAddr, typeof(PRINTER_INFO_2));
intRet = System.Convert.ToInt32(Info2.Status);
}
Marshal.FreeHGlobal(pAddr);
}
ClosePrinter(hPrinter);
}
return intRet;
}
internal static PRINTER_INFO_2[] EnumPrintersByFlag(PrinterEnumFlags Flags)
{
uint cbNeeded = 0;
uint cReturned = 0;
bool ret = EnumPrinters( PrinterEnumFlags.PRINTER_ENUM_LOCAL, null, 2, IntPtr.Zero, 0, ref cbNeeded, ref cReturned);
IntPtr pAddr = Marshal.AllocHGlobal((int)cbNeeded);
ret = EnumPrinters(PrinterEnumFlags.PRINTER_ENUM_LOCAL, null, 2, pAddr, cbNeeded, ref cbNeeded, ref cReturned);
if (ret)
{
PRINTER_INFO_2[] Info2 = new PRINTER_INFO_2[cReturned];
int offset = pAddr.ToInt32();
for (int i = 0; i < cReturned; i++)
{
Info2[i].pServerName = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pPrinterName = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pShareName = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pPortName = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pDriverName = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pComment = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pLocation = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pDevMode = Marshal.ReadIntPtr(new IntPtr(offset));
offset += 4;
Info2[i].pSepFile = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pPrintProcessor = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pDatatype = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pParameters = Marshal.PtrToStringAuto(Marshal.ReadIntPtr(new IntPtr(offset)));
offset += 4;
Info2[i].pSecurityDescriptor = Marshal.ReadIntPtr(new IntPtr(offset));
offset += 4;
Info2[i].Attributes = (uint )Marshal.ReadIntPtr(new IntPtr(offset));
offset += 4;
Info2[i].Priority = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
Info2[i].DefaultPriority = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
Info2[i].StartTime = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
Info2[i].UntilTime = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
Info2[i].Status = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
Info2[i].cJobs = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
Info2[i].AveragePPM = (uint)Marshal.ReadInt32(new IntPtr(offset));
offset += 4;
}
Marshal.FreeHGlobal(pAddr);
return Info2;
}
else
{
return new PRINTER_INFO_2[0];
}
}
#region 獲取當前指定打印機的狀態
/// </summary>
/// 獲取當前指定打印機的狀態
/// </summary>
/// <param name="PrinterName">打印機名稱</param>
/// <returns>打印機狀態描述</returns>
public static string GetPrinterStatus(string PrinterName)
{
int intValue = GetPrinterStatusInt(PrinterName);
string strRet = string.Empty;
switch (intValue)
{
case 0:
strRet = "準備就緒（Ready）";
break;
case 0x00000200:
strRet = "忙(Busy）";
break;
case 0x00400000:
strRet = "門被打開（Printer Door Open）";
break;
case 0x00000002:
strRet = "錯誤(Printer Error）";
break;
case 0x0008000:
strRet = "正在初始化(Initializing）";
break;
case 0x00000100:
strRet = "正在輸入或輸出（I/O Active）";
break;
case 0x00000020:
strRet = "手工送紙（Manual Feed）";
break;
case 0x00040000:
strRet = "無墨粉（No Toner）";
break;
case 0x00001000:
strRet = "不可用（Not Available）";
break;
case 0x00000080:
strRet = "脫機（Off Line）";
break;
case 0x00200000:
strRet = "內存溢出（Out of Memory）";
break;
case 0x00000800:
strRet = "輸出口已滿（Output Bin Full）";
break;
case 0x00080000:
strRet = "當前頁無法打?。≒age Punt）";
break;
case 0x00000008:
strRet = "塞紙（Paper Jam）";
break;
case 0x00000010:
strRet = "打印紙用完（Paper Out）";
break;
case 0x00000040:
strRet = "紙張問題（Page Problem）";
break;
case 0x00000001:
strRet = "暫停（Paused）";
break;
case 0x00000004:
strRet = "正在刪除（Pending Deletion）";
break;
case 0x00000400:
strRet = "正在打?。≒rinting）";
break;
case 0x00004000:
strRet = "正在處理（Processing）";
break;
case 0x00020000:
strRet = "墨粉不足（Toner Low）";
break;
case 0x00100000:
strRet = "需要用戶干預（User Intervention）";
break;
case 0x20000000:
strRet = "等待（Waiting）";
break;
case 0x00010000:
strRet = "正在準備（Warming Up）";
break;
default:
strRet = "未知狀態（Unknown Status）";
break;
}
return strRet;
}
#endregion 獲取當前指定打印機的狀態
#region 刪除已經存在的自定義紙張
/**/
/// <summary>
/// 刪除已經存在的自定義紙張
/// </summary>
/// <param name="PrinterName">打印機名稱</param>
/// <param name="PaperName">紙張名稱</param>
public static void DeleteCustomPaperSize(string PrinterName, string PaperName)
{
const int PRINTER_ACCESS_USE = 0x00000008;
const int PRINTER_ACCESS_ADMINISTER = 0x00000004;
structPrinterDefaults defaults = new structPrinterDefaults();
defaults.pDatatype = null;
defaults.pDevMode = IntPtr.Zero;
defaults.DesiredAccess = PRINTER_ACCESS_ADMINISTER | PRINTER_ACCESS_USE;
IntPtr hPrinter = IntPtr.Zero;
//打開打印機
if (OpenPrinter(PrinterName, out hPrinter, ref defaults))
{
try
{
DeleteForm(hPrinter, PaperName);
ClosePrinter(hPrinter);
}
catch
{
}
}
}
#endregion 刪除已經存在的自定義紙張
#region 指定的打印機設置以mm為單位的自定義紙張(Form)
/**/
/// <summary>
/// 指定的打印機設置以mm為單位的自定義紙張(Form)
/// </summary>
/// <param name="PrinterName">打印機名稱</param>
/// <param name="PaperName">Form名稱</param>
/// <param name="WidthInMm">以mm為單位的寬度</param>
/// <param name="HeightInMm">以mm為單位的高度</param>
public static void AddCustomPaperSize(string PrinterName, string PaperName, float WidthInMm, float HeightInMm)
{
if (PlatformID.Win32NT == Environment.OSVersion.Platform)
{
const int PRINTER_ACCESS_USE = 0x00000008;
const int PRINTER_ACCESS_ADMINISTER = 0x00000004;
const int FORM_PRINTER = 0x00000002;
structPrinterDefaults defaults = new structPrinterDefaults();
defaults.pDatatype = null;
defaults.pDevMode = IntPtr.Zero;
defaults.DesiredAccess = PRINTER_ACCESS_ADMINISTER | PRINTER_ACCESS_USE;
IntPtr hPrinter = IntPtr.Zero;
//打開打印機
if (OpenPrinter(PrinterName, out hPrinter, ref defaults))
{
try
{
//如果Form存在刪除之
DeleteForm(hPrinter, PaperName);
//創建并初始化FORM_INFO_1
FormInfo1 formInfo = new FormInfo1();
formInfo.Flags = 0;
formInfo.pName = PaperName;
formInfo.Size.width = (int)(WidthInMm * 1000.0);
formInfo.Size.height = (int)(HeightInMm * 1000.0);
formInfo.ImageableArea.left = 0;
formInfo.ImageableArea.right = formInfo.Size.width;
formInfo.ImageableArea.top = 0;
formInfo.ImageableArea.bottom = formInfo.Size.height;
if (!AddForm(hPrinter, 1, ref formInfo))
{
StringBuilder strBuilder = new StringBuilder();
strBuilder.AppendFormat("向打印機 {1} 添加自定義紙張 {0} 失??！錯誤代號：{2}",
PaperName, PrinterName, GetLastError());
throw new ApplicationException(strBuilder.ToString());
}
//初始化
const int DM_OUT_BUFFER = 2;
const int DM_IN_BUFFER = 8;
structDevMode devMode = new structDevMode();
IntPtr hPrinterInfo, hDummy;
PRINTER_INFO_9 printerInfo;
printerInfo.pDevMode = IntPtr.Zero;
int iPrinterInfoSize, iDummyInt;
int iDevModeSize = DocumentProperties(IntPtr.Zero, hPrinter, PrinterName, IntPtr.Zero, IntPtr.Zero, 0);
if (iDevModeSize < 0)
throw new ApplicationException("無法取得DEVMODE結構的大??！");
//分配緩沖
IntPtr hDevMode = Marshal.AllocCoTaskMem(iDevModeSize + 100);
//獲取DEV_MODE指針
int iRet = DocumentProperties(IntPtr.Zero, hPrinter, PrinterName, hDevMode, IntPtr.Zero, DM_OUT_BUFFER);
if (iRet < 0)
throw new ApplicationException("無法獲得DEVMODE結構！");
//填充DEV_MODE
devMode = (structDevMode)Marshal.PtrToStructure(hDevMode, devMode.GetType());
devMode.dmFields = 0x10000;
//FORM名稱
devMode.dmFormName = PaperName;
Marshal.StructureToPtr(devMode, hDevMode, true);
iRet = DocumentProperties(IntPtr.Zero, hPrinter, PrinterName,
printerInfo.pDevMode, printerInfo.pDevMode, DM_IN_BUFFER | DM_OUT_BUFFER);
if (iRet < 0)
throw new ApplicationException("無法為打印機設定打印方向！");
GetPrinter(hPrinter, 9, IntPtr.Zero, 0, out iPrinterInfoSize);
if (iPrinterInfoSize == 0)
throw new ApplicationException("調用GetPrinter方法失??！");
hPrinterInfo = Marshal.AllocCoTaskMem(iPrinterInfoSize + 100);
bool bSuccess = GetPrinter(hPrinter, 9, hPrinterInfo, iPrinterInfoSize, out iDummyInt);
if (!bSuccess)
throw new ApplicationException("調用GetPrinter方法失敗！");
printerInfo = (PRINTER_INFO_9)Marshal.PtrToStructure(hPrinterInfo, printerInfo.GetType());
printerInfo.pDevMode = hDevMode;
Marshal.StructureToPtr(printerInfo, hPrinterInfo, true);
bSuccess = SetPrinter(hPrinter, 9, hPrinterInfo, 0);
if (!bSuccess)
throw new Win32Exception(Marshal.GetLastWin32Error(), "調用SetPrinter方法失敗，無法進行打印機設置！");
SendMessageTimeout(
new IntPtr(HWND_BROADCAST),
WM_SETTINGCHANGE,
IntPtr.Zero,
IntPtr.Zero,
Printer.SendMessageTimeoutFlags.SMTO_NORMAL,
1000,
out hDummy);
}
finally
{
ClosePrinter(hPrinter);
}
}
else
{
StringBuilder strBuilder = new StringBuilder();
strBuilder.AppendFormat("無法打開打印機{0}, 錯誤代號: {1}",
PrinterName, GetLastError());
throw new ApplicationException(strBuilder.ToString());
}
}
else
{
structDevMode pDevMode = new structDevMode();
IntPtr hDC = CreateDC(null, PrinterName, null, ref pDevMode);
if (hDC != IntPtr.Zero)
{
const long DM_PAPERSIZE = 0x00000002L;
const long DM_PAPERLENGTH = 0x00000004L;
const long DM_PAPERWIDTH = 0x00000008L;
pDevMode.dmFields = (int)(DM_PAPERSIZE | DM_PAPERWIDTH | DM_PAPERLENGTH);
pDevMode.dmPaperSize = 256;
pDevMode.dmPaperWidth = (short)(WidthInMm * 1000.0);
pDevMode.dmPaperLength = (short)(HeightInMm * 1000.0);
ResetDC(hDC, ref pDevMode);
DeleteDC(hDC);
}
}
}
#endregion 指定的打印機設置以mm為單位的自定義紙張(Form)
#region 獲取本地打印機列表
/**/
/// <summary>
/// 獲取本地打印機列表
/// 可以通過制定參數獲取網絡打印機
/// </summary>
/// <returns>打印機列表</returns>
public static System.Collections.ArrayList GetPrinterList()
{
System.Collections.ArrayList alRet = new System.Collections.ArrayList();
PRINTER_INFO_2[] Info2 = EnumPrintersByFlag(PrinterEnumFlags.PRINTER_ENUM_LOCAL);
for (int i = 0; i < Info2.Length; i++)
{
alRet.Add(Info2[i].pPrinterName);
}
return alRet;
}
#endregion 獲取本地打印機列表
#region 獲取本機的默認打印機名稱
/**/
/// <summary>
/// 獲取本機的默認打印機名稱
/// </summary>
/// <returns>默認打印機名稱</returns>
public static string GetDeaultPrinterName()
{
StringBuilder dp = new StringBuilder(256);
int size = dp.Capacity;
if (GetDefaultPrinter(dp, ref size))
{
return dp.ToString();
}
else
{
return string.Empty;
}
}
#endregion 獲取本機的默認打印機名稱
#region 設置默認打印機
/**/
/// <summary>
/// 設置默認打印機
/// </summary>
/// <param name="PrinterName">可用的打印機名稱</param>
public static void SetPrinterToDefault(string PrinterName)
{
SetDefaultPrinter(PrinterName);
}
#endregion 設置默認打印機
#region 判斷打印機是否在系統可用的打印機列表中
/**/
///// <summary>
///// 判斷打印機是否在系統可用的打印機列表中
///// </summary>
///// <param name="PrinterName">打印機名稱</param>
///// <returns>是：在；否：不在</returns>
public static bool PrinterInList(string PrinterName)
{
bool bolRet = false;
System.Collections.ArrayList alPrinters = GetPrinterList();
for (int i = 0; i < alPrinters.Count; i++)
{
if (PrinterName == alPrinters[i].ToString())
{
bolRet = true;
break;
}
}
alPrinters.Clear();
alPrinters = null;
return bolRet;
}
#endregion 判斷打印機是否在系統可用的打印機列表中
#region 判斷表單是否在指定的打印機所支持的紙張列表中
/**/
///// <summary>
///// 判斷表單是否在指定的打印機所支持的紙張列表中,表單就是我們平常所說的紙張
///// </summary>
///// <param name="PrinterName">打印機名稱</param>
///// <param name="PaperName">紙張名稱</param>
///// <returns>是：在；否：不在</returns>
public static bool FormInPrinter(string PrinterName, string PaperName)
{
bool bolRet = false;
System.Drawing.Printing.PrintDocument pd = new System.Drawing.Printing.PrintDocument();
pd.PrinterSettings.PrinterName = PrinterName;
foreach (System.Drawing.Printing.PaperSize ps in pd.PrinterSettings.PaperSizes)
{
if (ps.PaperName == PaperName)
{
bolRet = true;
break;
}
}
pd.Dispose();
return bolRet;
}
#endregion 判斷表單是否在指定的打印機所支持的紙張列表中
#region 判斷指定紙張的寬度和高度和與打印內容指定的寬度和高度是否匹配
/**/
/// <summary>
/// 判斷指定紙張的寬度和高度和與打印內容指定的寬度和高度是否匹配
/// </summary>
/// <param name="PrinterName">打印機名稱</param>
/// <param name="FormName">表單名稱</param>
/// <param name="Width">寬度</param>
/// <param name="Height">高度</param>
/// <returns></returns>
public static bool FormSameSize(string PrinterName, string FormName, decimal Width, decimal Height)
{
bool bolRet = false;
System.Drawing.Printing.PrintDocument pd = new System.Drawing.Printing.PrintDocument();
pd.PrinterSettings.PrinterName = PrinterName;
foreach (System.Drawing.Printing.PaperSize ps in pd.PrinterSettings.PaperSizes)
{
if (ps.PaperName == FormName)
{
decimal decWidth = FromInchToCM(System.Convert.ToDecimal(ps.Width));
decimal decHeight = FromInchToCM(System.Convert.ToDecimal(ps.Height));
//只要整數位相同即認為是同一紙張，畢竟inch到cm的轉換并不能整除
if (Math.Round(decWidth, 0) == Math.Round(Width, 0) && Math.Round(decHeight, 0) == Math.Round(Height, 0))
bolRet = true;
break;
}
}
pd.Dispose();
return bolRet;
}
#endregion 判斷指定紙張的寬度和高度和與打印內容指定的寬度和高度是否匹配
#region 英寸到厘米的轉換
/**/
/// <summary>
/// 英寸到厘米的轉換
/// /* = = = = = = = = = = = = = = = = *\
/// | 換算一下計量單位，將其換算成厘米 |
/// | 厘米 像素 英寸 |
/// | 1 38 0.395 |
/// | 0.026 1 0.01 |
/// | 2.54 96 1 |
/// \* = = = = = = = = = = = = = = = = */
/// </summary>
/// <param name="inch">英寸數</param>
/// <returns>厘米數，兩位小數</returns>
///
public static decimal FromInchToCM(decimal inch)
{
return Math.Round((System.Convert.ToDecimal((inch / 100)) * System.Convert.ToDecimal(2.5400)), 2);
}
#endregion 英寸到厘米的轉換
}
}
相關文章
詳解C#如何使用屏障實現多線程并發操作保持同步
這篇文章主要為大家詳細介紹了C#如何使用屏障實現多線程并發操作保持同步,文中的示例代碼簡潔易懂,具有一定的借鑒價值,有需要的小伙伴可以參考下2024-01-01
C#/.Net 中快速批量給SQLite數據庫插入測試數據
這篇文章主要介紹了C#/.Net 中快速批量給SQLite數據庫插入測試數據,本文直接給出實例代碼,需要的朋友可以參考下2015-06-06
本文主要介紹了C#實現http請求的兩種方式，get和post方式。文中通過示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2021-09-09
這篇文章主要介紹了C#?利用Autofac批量接口注入依賴的問題，本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-12-12
這篇文章主要為大家詳細介紹了C#拼圖游戲的編寫代碼，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2017-04-04
Entity?Framework代碼優先(Code?First)模式
這篇文章介紹了Entity?Framework代碼優先(Code?First)模式，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-06-06
Unity性能優化Shader函數ShaderUtil.GetShaderGlobalKeywords用法示例
這篇文章主要為大家介紹了Unity性能優化Shader函數ShaderUtil.GetShaderGlobalKeywords用法示例詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-09-09
這篇文章主要介紹了C# 構造方法(函數)的的相關資料，文中講解非常詳細，幫助大家更好的學習C#，感興趣的朋友可以了解下2020-06-06
這篇文章主要為大家詳細介紹了如何利用C#實現對文件進行加密保護的功能，文中的示例代碼講解詳細，對我們學習C#有一定的幫助，感興趣的小伙伴可以跟隨小編一起了解一下2022-12-12
這篇文章介紹了C#靜態方法的使用，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-04-04