簡易Dota改鍵程序制作
dll部分：
// FileName: add.cpp
#include <Windows.h>
/* 定義全局變量 */
HWND g_hwnd = NULL;
HHOOK g_hKeyboard = NULL;
// 設置數據段
#pragma data_seg("MySec")
static WORD g_keyNum[6]={0}; // 只有初始化過的才能用
static int g_signed = 0;
#pragma data_seg()
#pragma comment( linker,"/section:MySec,RWS" )
LRESULT CALLBACK KeyboardProc(
int code, // hook code
WPARAM wParam, // virtual-key code
LPARAM lParam // keystroke-message information
)
{
for(int j=0; j<6; j++)
{
if(wParam==g_keyNum[j] && !(lParam>>31) )
{
switch(j)
{
case 0: keybd_event(VK_NUMPAD1,0,KEYEVENTF_EXTENDEDKEY,0); keybd_event(VK_NUMPAD1,0,KEYEVENTF_KEYUP,0); return 1;
case 1: keybd_event(VK_NUMPAD2,0,KEYEVENTF_EXTENDEDKEY,0); keybd_event(VK_NUMPAD2,0,KEYEVENTF_KEYUP,0); return 1;
case 2: keybd_event(VK_NUMPAD4,0,KEYEVENTF_EXTENDEDKEY,0); keybd_event(VK_NUMPAD4,0,KEYEVENTF_KEYUP,0); return 1;
case 3: keybd_event(VK_NUMPAD5,0,KEYEVENTF_EXTENDEDKEY,0); keybd_event(VK_NUMPAD5,0,KEYEVENTF_KEYUP,0); return 1;
case 4: keybd_event(VK_NUMPAD7,0,KEYEVENTF_EXTENDEDKEY,0); keybd_event(VK_NUMPAD7,0,KEYEVENTF_KEYUP,0); return 1;
case 5: keybd_event(VK_NUMPAD8,0,KEYEVENTF_EXTENDEDKEY,0); keybd_event(VK_NUMPAD8,0,KEYEVENTF_KEYUP,0); return 1;
}
}
}
return CallNextHookEx(g_hKeyboard,code,wParam,lParam);
}
_declspec(dllexport) void SetHook (WORD KeyNum[])
{
for(int i=0; i<6; i++)
{
g_keyNum[i] = KeyNum[i];
}
g_hKeyboard=SetWindowsHookEx(WH_KEYBOARD,KeyboardProc,GetModuleHandle(L"DLL.dll"),0);
}
_declspec(dllexport) void DelHook ()
{
UnhookWindowsHookEx(g_hKeyboard);
g_hKeyboard = NULL;
}
主程序部分：
// DotaDlg.cpp : 實現文件
//
#include "stdafx.h"
#include "Dota.h"
#include "DotaDlg.h"
#include "afxdialogex.h"
#pragma comment(lib, "DLL.lib")
#ifdef _DEBUG
#define new DEBUG_NEW
#endif
/* 全局變量 */
CDotaDlg * g_pt = NULL;
HHOOK g_hook;
/* 記錄輸入框是否有焦點 */
bool g_signNum[6] = {false};
/* 記錄按下鍵的編碼 */
WORD g_nkey[6] = {0};
/* 按鍵表 */
CString g_szkeyboard[200];
// 用于應用程序“關于”菜單項的 CAboutDlg 對話框
class CAboutDlg : public CDialogEx
{
public:
CAboutDlg();
// 對話框數據
enum { IDD = IDD_ABOUTBOX };
protected:
virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV 支持
// 實現
protected:
DECLARE_MESSAGE_MAP()
};
CAboutDlg::CAboutDlg() : CDialogEx(CAboutDlg::IDD)
{
}
void CAboutDlg::DoDataExchange(CDataExchange* pDX)
{
CDialogEx::DoDataExchange(pDX);
}
BEGIN_MESSAGE_MAP(CAboutDlg, CDialogEx)
END_MESSAGE_MAP()
// CDotaDlg 對話框
CDotaDlg::CDotaDlg(CWnd* pParent /*=NULL*/)
: CDialogEx(CDotaDlg::IDD, pParent)
, m_num7(_T(""))
, m_num8(_T(""))
, m_num4(_T(""))
, m_num1(_T(""))
, m_num2(_T(""))
, m_num5(_T(""))
{
m_hIcon = AfxGetApp()->LoadIcon(IDR_MAINFRAME);
}
void CDotaDlg::DoDataExchange(CDataExchange* pDX)
{
CDialogEx::DoDataExchange(pDX);
DDX_Text(pDX, IDC_EDIT_NUM7, m_num7);
DDV_MaxChars(pDX, m_num7, 1);
DDX_Text(pDX, IDC_EDIT_NUM8, m_num8);
DDV_MaxChars(pDX, m_num8, 1);
DDX_Text(pDX, IDC_EDIT_NUM4, m_num4);
DDV_MaxChars(pDX, m_num4, 1);
DDX_Text(pDX, IDC_EDIT_NUM1, m_num1);
DDV_MaxChars(pDX, m_num1, 1);
DDX_Text(pDX, IDC_EDIT_NUM2, m_num2);
DDV_MaxChars(pDX, m_num2, 1);
DDX_Text(pDX, IDC_EDIT_NUM5, m_num5);
DDV_MaxChars(pDX, m_num5, 1);
}
BEGIN_MESSAGE_MAP(CDotaDlg, CDialogEx)
ON_WM_SYSCOMMAND()
ON_WM_PAINT()
ON_WM_QUERYDRAGICON()
ON_BN_CLICKED(IDC_BUTTON_EXIT, &CDotaDlg::OnBnClickedButtonExit)
ON_EN_SETFOCUS(IDC_EDIT_NUM7, &CDotaDlg::OnEnSetfocusEditNum7)
ON_WM_DESTROY()
ON_EN_KILLFOCUS(IDC_EDIT_NUM7, &CDotaDlg::OnEnKillfocusEditNum7)
ON_EN_SETFOCUS(IDC_EDIT_NUM8, &CDotaDlg::OnEnSetfocusEditNum8)
ON_EN_KILLFOCUS(IDC_EDIT_NUM8, &CDotaDlg::OnEnKillfocusEditNum8)
ON_EN_SETFOCUS(IDC_EDIT_NUM4, &CDotaDlg::OnEnSetfocusEditNum4)
ON_EN_KILLFOCUS(IDC_EDIT_NUM4, &CDotaDlg::OnEnKillfocusEditNum4)
ON_EN_SETFOCUS(IDC_EDIT_NUM5, &CDotaDlg::OnEnSetfocusEditNum5)
ON_EN_KILLFOCUS(IDC_EDIT_NUM5, &CDotaDlg::OnEnKillfocusEditNum5)
ON_EN_SETFOCUS(IDC_EDIT_NUM1, &CDotaDlg::OnEnSetfocusEditNum1)
ON_EN_KILLFOCUS(IDC_EDIT_NUM1, &CDotaDlg::OnEnKillfocusEditNum1)
ON_EN_SETFOCUS(IDC_EDIT_NUM2, &CDotaDlg::OnEnSetfocusEditNum2)
ON_EN_KILLFOCUS(IDC_EDIT_NUM2, &CDotaDlg::OnEnKillfocusEditNum2)
ON_WM_TIMER()
ON_BN_CLICKED(IDC_BUTTON_HIDE, &CDotaDlg::OnBnClickedButtonHide)
ON_MESSAGE(WM_SHOWTASK,OnShowTask)
END_MESSAGE_MAP()
/* 局部鉤子處理程序 */
LRESULT CALLBACK KeyboardProc(
int code, // hook code
WPARAM wParam, // virtual-key code
LPARAM lParam // keystroke-message information
)
{
/* 按一個鍵時 */
if(wParam && !(lParam>>31))
{
//CString str;
//str.Format(L"%d", wParam);
//AfxMessageBox(str);
POINT point;
GetCaretPos(&point);
for(int i=0; i<6; i++)
{
if(g_signNum[i]) // 且某個輸入框有輸入焦點
{
if(wParam != VK_BACK) //且按下的 不是 退格鍵
{
switch(i)
{
case 0: g_pt->m_num1 = g_szkeyboard[wParam]; g_nkey[0]=wParam; g_pt->UpdateData(FALSE); break;
case 1: g_pt->m_num2 = g_szkeyboard[wParam]; g_nkey[1]=wParam; g_pt->UpdateData(FALSE); break;
case 2: g_pt->m_num4 = g_szkeyboard[wParam]; g_nkey[2]=wParam; g_pt->UpdateData(FALSE); break;
case 3: g_pt->m_num5 = g_szkeyboard[wParam]; g_nkey[3]=wParam; g_pt->UpdateData(FALSE); break;
case 4: g_pt->m_num7 = g_szkeyboard[wParam]; g_nkey[4]=wParam; g_pt->UpdateData(FALSE); break;
case 5: g_pt->m_num8 = g_szkeyboard[wParam]; g_nkey[5]=wParam; g_pt->UpdateData(FALSE); break;
}
}
else // 按下退格鍵刪除以前的改鍵
{
switch(i)
{
case 0: g_pt->m_num1 = ""; g_nkey[0]=0; g_pt->UpdateData(FALSE); break;
case 1: g_pt->m_num2 = ""; g_nkey[1]=0; g_pt->UpdateData(FALSE); break;
case 2: g_pt->m_num4 = ""; g_nkey[2]=0; g_pt->UpdateData(FALSE); break;
case 3: g_pt->m_num5 = ""; g_nkey[3]=0; g_pt->UpdateData(FALSE); break;
case 4: g_pt->m_num7 = ""; g_nkey[4]=0; g_pt->UpdateData(FALSE); break;
case 5: g_pt->m_num8 = ""; g_nkey[5]=0; g_pt->UpdateData(FALSE); break;
}
}
}
}
}
//return CallNextHookEx(g_hook, code, wParam, lParam);
return 1;
}
// CDotaDlg 消息處理程序
BOOL CDotaDlg::OnInitDialog()
{
CDialogEx::OnInitDialog();
// 將“關于...”菜單項添加到系統菜單中。
// IDM_ABOUTBOX 必須在系統命令范圍內。
ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX);
ASSERT(IDM_ABOUTBOX < 0xF000);
CMenu* pSysMenu = GetSystemMenu(FALSE);
if (pSysMenu != NULL)
{
BOOL bNameValid;
CString strAboutMenu;
bNameValid = strAboutMenu.LoadString(IDS_ABOUTBOX);
ASSERT(bNameValid);
if (!strAboutMenu.IsEmpty())
{
pSysMenu->AppendMenu(MF_SEPARATOR);
pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu);
}
}
// 設置此對話框的圖標。當應用程序主窗口不是對話框時，框架將自動
// 執行此操作
SetIcon(m_hIcon, TRUE); // 設置大圖標
SetIcon(m_hIcon, FALSE); // 設置小圖標
// TODO: 在此添加額外的初始化代碼
SetTimer(1, 1000, NULL); // 設置一個定時器
g_pt = this;
g_szkeyboard['0']="0";g_szkeyboard['1']="1";g_szkeyboard['2']="2";g_szkeyboard['3']="3";g_szkeyboard['4']="4";
g_szkeyboard['5']="5";g_szkeyboard['6']="6";g_szkeyboard['7']="7";g_szkeyboard['8']="8";g_szkeyboard['9']="9";
g_szkeyboard['A']="A";g_szkeyboard['B']="B";g_szkeyboard['C']="C";g_szkeyboard['D']="D";g_szkeyboard['E']="E";
g_szkeyboard['F']="F";g_szkeyboard['G']="G";g_szkeyboard['H']="H";g_szkeyboard['I']="I";g_szkeyboard['J']="J";
g_szkeyboard['K']="K";g_szkeyboard['L']="L";g_szkeyboard['M']="M";g_szkeyboard['N']="N";g_szkeyboard['O']="O";
g_szkeyboard['P']="P";g_szkeyboard['Q']="Q";g_szkeyboard['R']="R";g_szkeyboard['S']="S";g_szkeyboard['T']="T";
g_szkeyboard['U']="U";g_szkeyboard['V']="V";g_szkeyboard['W']="W";g_szkeyboard['X']="X";g_szkeyboard['Y']="Y";
g_szkeyboard['Z']="Z";
g_szkeyboard[144]="NUM LOCK";
g_szkeyboard[96]="NUM 0";g_szkeyboard[97]="NUM 1";g_szkeyboard[98]="NUM 2";g_szkeyboard[99]="NUM 3";g_szkeyboard[100]="NUM 4";
g_szkeyboard[101]="NUM 5";g_szkeyboard[102]="NUM 6";g_szkeyboard[103]="NUM 7";g_szkeyboard[104]="NUM 8";g_szkeyboard[105]="NUM 9";
g_szkeyboard[106]="NUM *";g_szkeyboard[107]="NUM +";g_szkeyboard[109]="NUM -";g_szkeyboard[110]="NUM DEL";g_szkeyboard[111]="NUM /";
g_szkeyboard[VK_F1]="F1";g_szkeyboard[VK_F2]="F2";g_szkeyboard[VK_F3]="F3";g_szkeyboard[VK_F4]="F4";g_szkeyboard[VK_F5]="F5";
g_szkeyboard[VK_F6]="F6";g_szkeyboard[VK_F7]="F7";g_szkeyboard[VK_F8]="F8";g_szkeyboard[VK_F9]="F9";g_szkeyboard[VK_F10]="F10";
g_szkeyboard[VK_F11]="F11";g_szkeyboard[VK_F12]="F12";
g_szkeyboard[VK_ESCAPE]="ESC";g_szkeyboard[VK_TAB]="TAB";g_szkeyboard[VK_CAPITAL]="Caps Lock";g_szkeyboard[192]="`";
g_szkeyboard[VK_SPACE]="Space";
/* 安裝局部鉤子 */
g_hook = SetWindowsHookEx(WH_KEYBOARD, KeyboardProc, NULL, GetCurrentThreadId());
ReadKeyNum();
return TRUE; // 除非將焦點設置到控件，否則返回 TRUE
}
void CDotaDlg::OnSysCommand(UINT nID, LPARAM lParam)
{
if ((nID & 0xFFF0) == IDM_ABOUTBOX)
{
CAboutDlg dlgAbout;
dlgAbout.DoModal();
}
else
{
CDialogEx::OnSysCommand(nID, lParam);
}
}
// 如果向?qū)υ捒蛱砑幼钚』粹o，則需要下面的代碼
// 來繪制該圖標。對于使用文檔/視圖模型的 MFC 應用程序，
// 這將由框架自動完成。
void CDotaDlg::OnPaint()
{
if (IsIconic())
{
CPaintDC dc(this); // 用于繪制的設備上下文
SendMessage(WM_ICONERASEBKGND, reinterpret_cast<WPARAM>(dc.GetSafeHdc()), 0);
// 使圖標在工作區矩形中居中
int cxIcon = GetSystemMetrics(SM_CXICON);
int cyIcon = GetSystemMetrics(SM_CYICON);
CRect rect;
GetClientRect(&rect);
int x = (rect.Width() - cxIcon + 1) / 2;
int y = (rect.Height() - cyIcon + 1) / 2;
// 繪制圖標
dc.DrawIcon(x, y, m_hIcon);
}
else
{
CDialogEx::OnPaint();
}
}
//當用戶拖動最小化窗口時系統調用此函數取得光標
//顯示。
HCURSOR CDotaDlg::OnQueryDragIcon()
{
return static_cast<HCURSOR>(m_hIcon);
}
BOOL CDotaDlg::PreTranslateMessage (MSG * pMsg)
{
switch(pMsg->wParam)
{
case VK_ESCAPE: // 屏蔽ESC鍵
return TRUE;
}
return CDialog::PreTranslateMessage(pMsg);
}
void CDotaDlg::OnBnClickedButtonExit()
{
//OnNotifyMsg();
SendMessage(WM_CLOSE);
}
void CDotaDlg::OnDestroy()
{
CDialogEx::OnDestroy();
g_pt = NULL;
KillTimer(1);
/* 卸載鉤子 */
UnhookWindowsHookEx(g_hook);
}
void CDotaDlg::OnEnSetfocusEditNum7()
{
g_signNum[4] = true;
}
void CDotaDlg::OnEnKillfocusEditNum7()
{
g_signNum[4] = false;
}
void CDotaDlg::OnEnSetfocusEditNum8()
{
g_signNum[5] = true;
}
void CDotaDlg::OnEnKillfocusEditNum8()
{
g_signNum[5] = false;
}
void CDotaDlg::OnEnSetfocusEditNum4()
{
g_signNum[2] = true;
}
void CDotaDlg::OnEnKillfocusEditNum4()
{
g_signNum[2] = false;
}
void CDotaDlg::OnEnSetfocusEditNum5()
{
g_signNum[3] = true;
}
void CDotaDlg::OnEnKillfocusEditNum5()
{
g_signNum[3] = false;
}
void CDotaDlg::OnEnSetfocusEditNum1()
{
g_signNum[0] = true;
}
void CDotaDlg::OnEnKillfocusEditNum1()
{
g_signNum[0] = false;
}
void CDotaDlg::OnEnSetfocusEditNum2()
{
g_signNum[1] = true;
}
void CDotaDlg::OnEnKillfocusEditNum2()
{
g_signNum[1] = false;
}
_declspec(dllimport) void SetHook (WORD KeyNum[]);
_declspec(dllimport) void DelHook ();
void CDotaDlg::OnTimer(UINT_PTR nIDEvent)
{
static int sign = 1;
HWND hwnd = NULL;
hwnd = ::FindWindow(L"Warcraft III",0); // 獲得頂層窗口句柄
if(hwnd == ::GetForegroundWindow()) // 得到前臺窗口句柄
{
if(sign)
{
//MessageBox(L"找到目標進程了");
//DelHook();
SetHook(g_nkey); // 安裝鉤子。
sign = 0;
}
}
else
{
DelHook();
sign = 1;
}
CDialogEx::OnTimer(nIDEvent);
}
_declspec(dllimport) void SetHook (WORD KeyNum[]);
void CDotaDlg::OnBnClickedButtonHide()
{
//SetHook(g_nkey);
CStdioFile file;
CString str;
CFileException mExcept;
file.Open(L"Key.ini", CFile::modeCreate|CFile::modeReadWrite, &mExcept);
file.SeekToEnd();
str.Format(L"@%d-->1@\n@%d-->2@\n@%d-->4@\n@%d-->5@\n@%d-->7@\n@%d-->8@\n",
g_nkey[0], g_nkey[1], g_nkey[2], g_nkey[3], g_nkey[4], g_nkey[5]);
file.WriteString(str);
file.Close();
NOTIFYICONDATA nid;
nid.cbSize=(DWORD)sizeof(NOTIFYICONDATA);
nid.hWnd=this->m_hWnd;
nid.uID=IDR_MAINFRAME;
nid.uFlags=NIF_ICON|NIF_MESSAGE|NIF_TIP ;
nid.uCallbackMessage=WM_SHOWTASK;//自定義的消息名稱
nid.hIcon=LoadIcon(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDR_MAINFRAME));
wcscpy(nid.szTip, L"冬雪簡易改鍵"); //信息提示條
Shell_NotifyIcon(NIM_ADD,&nid); //在托盤區添加圖標
ShowWindow(SW_HIDE); //隱藏主窗口
}
void CDotaDlg::ReadKeyNum(void)
{
CStdioFile file;
if(file.Open(L"Key.ini", CFile::modeRead))
{
CString buffer;
char buf[4];
int i;
int j = 0;
memset(buf,0,4);
while(file.ReadString(buffer))
{
i = 0;
for(i=0; i<4; i++)
{
buf[i]=char(buffer.GetAt(1+i));
if(buf[i] == '-')
{
buf[i] = '\0';
break;
}
}
g_nkey[j] = (WORD)atol(buf);
if(g_nkey[j])
{
switch(j)
{
case 0 : m_num1=g_szkeyboard[g_nkey[0]]; break;
case 1 : m_num2=g_szkeyboard[g_nkey[1]]; break;
case 2 : m_num4=g_szkeyboard[g_nkey[2]]; break;
case 3 : m_num5=g_szkeyboard[g_nkey[3]]; break;
case 4 : m_num7=g_szkeyboard[g_nkey[4]]; break;
case 5 : m_num8=g_szkeyboard[g_nkey[5]]; break;
}
}
j++;
}
UpdateData(FALSE);
file.Close();
}
}
void CDotaDlg::ToTray()
{
NOTIFYICONDATA nid;
nid.cbSize=(DWORD)sizeof(NOTIFYICONDATA);
nid.hWnd=this->m_hWnd;
nid.uID=IDR_MAINFRAME;
nid.uFlags=NIF_ICON|NIF_MESSAGE|NIF_TIP ;
nid.uCallbackMessage=WM_SHOWTASK;//自定義的消息名稱
nid.hIcon=LoadIcon(AfxGetInstanceHandle(),MAKEINTRESOURCE(IDR_MAINFRAME));
wcscpy(nid.szTip,L"冬雪簡易改鍵"); //信息提示條
Shell_NotifyIcon(NIM_ADD,&nid); //在托盤區添加圖標
ShowWindow(SW_HIDE); //隱藏主窗口
}
LRESULT CDotaDlg::OnShowTask(WPARAM wParam,LPARAM lParam)
{
if(wParam!=IDR_MAINFRAME)
return 1;
switch(lParam)
{
case WM_RBUTTONUP://右鍵起來時彈出快捷菜單，這里只有一個“關閉”
{
LPPOINT lpoint= new tagPOINT;
::GetCursorPos(lpoint);//得到鼠標位置
CMenu menu;
menu.CreatePopupMenu();//聲明一個彈出式菜單
//增加菜單項“關閉”，點擊則發送消息WM_DESTROY給主窗口（已
//隱藏），將程序結束。
menu.AppendMenu(MF_STRING,WM_DESTROY,L"關閉");
// menu.AppendMenu(MF_STRING,WM_DESTROY,"設置...");
//確定彈出式菜單的位置
menu.TrackPopupMenu(TPM_LEFTALIGN,lpoint->x,lpoint->y,this);
//資源回收
HMENU hmenu=menu.Detach();
menu.DestroyMenu();
delete lpoint;
}
break;
case WM_LBUTTONDBLCLK://雙擊左鍵的處理
{
ShowWindow(SW_SHOWNORMAL);//簡單的顯示主窗口完事兒 SW_SHOW則錯誤
// this->SetForegroundWindow(); // 置頂顯示
//~DeleteTray();
}
break;
default:
break;
}
return 0;
}
還可參考 dota改鍵精靈 v4.8.7 綠色版 附使用教程及注意事項 和 dota改鍵精靈(dota改建器) v4.88 免費 綠色版
相關文章
柔性數組是在C99中定義的，即結構體的最后一個元素允許是未知大小的數組，這就叫柔性數組。這篇文章將通過簡單的示例為大家介紹一下柔性數組的使用，感興趣的可以了解一下2023-02-02
C語言中獲取進程識別碼的相關函數
這篇文章主要介紹了C語言中獲取進程識別碼的相關函數,分別為getpid()函數和getppid()函數的使用,需要的朋友可以參考下2015-08-08
QWebEngineView是Qt框架中的一個組件,它是基于Chromium內核的Web瀏覽器引擎,用于在Qt應用程序中嵌入網頁內容和實現各種Web應用功能,這篇文章主要給大家介紹了關于Qt與QWebEngineView交互完整參考的相關資料,需要的朋友可以參考下2024-07-07
這篇文章主要為大家詳細介紹了C++實現猜數字游戲，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2020-07-07
C++實現對回收站里的文件進行操作的示例代碼
這篇文章主要為大家詳細介紹了C++如何使用代碼對回收站里的文件進行操作，譬如文件的刪除與恢復等，文中的示例代碼講解詳細，具有一定的學習價值，感興趣的小伙伴快跟隨小編一起學習學習吧2023-06-06
這篇文章主要介紹了C++枚舉類型enum與enum class的使用，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-08-08
C語言中實現KMP算法的實例講解
KMP算法即字符串匹配算法,C語言中KMP可以避免指針回溯從而達到高效,接下來就來總結一下C語言中實現KMP算法的實例講解2016-06-06
在C++學習使用過程中,每個人都不可避免地使用指針,而且都或多或少的接觸過常量指針或指針常量,但是對這兩個的概念還是很容易搞糊涂的,所以這篇文章主要給大家介紹了關于C++中常量與指針的相關資料,需要的朋友可以參考下2021-06-06
基于C++中sprintf的錯誤總結詳解
本篇文章是對C++中sprintf的錯誤進行了詳細的分析介紹，需要的朋友參考下2013-05-05
這篇文章主要為大家詳細介紹了C++撲克牌的洗牌發牌游戲設計，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2018-08-08