php 啟動報錯如何解決
更新時間:2014年01月17日 16:44:22 作者:
php 啟動時報錯的情況,想必很多朋友都有遇到過吧,下面是具體的解決方法
復制代碼 代碼如下:
[root@abc lnmp]# service php-fpm start
Starting php-fpm eAccelerator: Could not allocate 67108864 bytes, the maximum size the kernel allows is 33554432 bytes. Lower the amount of memory request or increase the limit in /proc/sys/kernel/shmmax.
[04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Warning: [eAccelerator] Can not create shared memory area in Unknown on line 0
[04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Fatal error: Unable to start eAccelerator module in Unknown on line 0
failed
復制代碼 代碼如下:
[root@abc lnmp]# vi /etc/sysctl.conf
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
fs.file-max=65535
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
# TIME_OUT后等待時間
#net.ipv4.tcp_fin_timeout = 30
#net.ipv4.tcp_keepalive_time = 120
net.ipv4.ip_local_port_range = 1024 65535
kernel.shmmax = 128000000
加上最后一句話 kernel.shmmax = 128000000
然后應用sysctl -p
復制代碼 代碼如下:
[root@abc lnmp]# service php-fpm start
Starting php-fpm done
[root@abc lnmp]# /usr/bin/memcachedstart
您可能感興趣的文章:
- 如何把php5.3版本升級到php5.4或者php5.5
- php5.4以上版本GBK編碼下htmlspecialchars輸出為空問題解決方法匯總
- Windows下編譯PHP5.4和xdebug全記錄
- php5.4以下版本json不支持不轉義內容中文的解決方法
- 注意:php5.4刪除了session_unregister函數
- 安裝apache2.2.22配置php5.4(具體操作步驟)
- PHP5.4中json_encode中文轉碼的變化小結
- php 升級到 5.3+ 后出現的一些錯誤,如 ereg(); ereg_replace(); 函數報錯
- 探尋PHP腳本不報錯的原因
- PHP empty函數報錯解決辦法
- php 啟動時報錯的簡單解決方法
- php5.4傳引用時報錯問題分析
相關文章
關于更改Zend Studio/Eclipse代碼風格主題的介紹
本篇文章是對關于更改Zend Studio/Eclipse代碼風格主題進行了詳細的分析介紹,需要的朋友參考下2013-06-06經典PHP加密解密函數Authcode()修復版代碼
這篇文章主要介紹了經典PHP加密解密函數Authcode()修復版代碼,需要的朋友可以參考下2015-04-04PHP擴展Swoole實現實時異步任務隊列示例
這篇文章主要介紹了PHP擴展Swoole實現實時異步任務隊列,結合實例形式分析了PHP擴展Swoole實現實時異步任務隊列相關客戶端與服務器端操作技巧,需要的朋友可以參考下2019-04-04php數組函數序列之end() - 移動數組內部指針到最后一個元素,并返回該元素的值
end() 函數將數組內部指針指向最后一個元素,并返回該元素的值(如果成功)。2011-10-10