PHP圖片裁剪函數(保持圖像不變形)
更新時間:2014年05月04日 11:25:22 作者:
這篇文章主要介紹了PHP圖片裁剪函數,同時保持圖像不變形,需要的朋友可以參考下
為了完成圖片上傳之后自動的裁剪,然后在前臺顯示出裁剪出的圖片。
需求如上,源碼如下:
<?
*exif_imagetype -- 判斷一個圖像的類型
*說明:函數功能是把一個圖像裁剪為任意大小的圖像,圖像不變形
* 參數說明:輸入 需要處理圖片的 文件名,生成新圖片的保存文件名,生成新圖片的寬,生成新圖片的高
*/
// 獲得任意大小圖像,不足地方拉伸,不產生變形,不留下空白
function my_image_resize($src_file, $dst_file , $new_width , $new_height) {
$new_width= intval($new_width);
$new_height=intval($new_width);
if($new_width <1 || $new_height <1) {
echo "params width or height error !";
exit();
}
if(!file_exists($src_file)) {
echo $src_file . " is not exists !";
exit();
}
// 圖像類型
$type=exif_imagetype($src_file);
$support_type=array(IMAGETYPE_JPEG , IMAGETYPE_PNG , IMAGETYPE_GIF);
if(!in_array($type, $support_type,true)) {
echo "this type of image does not support! only support jpg , gif or png";
exit();
}
//Load image
switch($type) {
case IMAGETYPE_JPEG :
$src_img=imagecreatefromjpeg($src_file);
break;
case IMAGETYPE_PNG :
$src_img=imagecreatefrompng($src_file);
break;
case IMAGETYPE_GIF :
$src_img=imagecreatefromgif($src_file);
break;
default:
echo "Load image error!";
exit();
}
$w=imagesx($src_img);
$h=imagesy($src_img);
$ratio_w=1.0 * $new_width / $w;
$ratio_h=1.0 * $new_height / $h;
$ratio=1.0;
// 生成的圖像的高寬比原來的都小,或都大 ,原則是 取大比例放大,取大比例縮小(縮小的比例就比較小了)
if( ($ratio_w < 1 && $ratio_h < 1) || ($ratio_w > 1 && $ratio_h > 1)) {
if($ratio_w < $ratio_h) {
$ratio = $ratio_h ; // 情況一,寬度的比例比高度方向的小,按照高度的比例標準來裁剪或放大
}else {
$ratio = $ratio_w ;
}
// 定義一個中間的臨時圖像,該圖像的寬高比 正好滿足目標要求
$inter_w=(int)($new_width / $ratio);
$inter_h=(int) ($new_height / $ratio);
$inter_img=imagecreatetruecolor($inter_w , $inter_h);
//var_dump($inter_img);
imagecopy($inter_img, $src_img, 0,0,0,0,$inter_w,$inter_h);
// 生成一個以最大邊長度為大小的是目標圖像$ratio比例的臨時圖像
// 定義一個新的圖像
$new_img=imagecreatetruecolor($new_width,$new_height);
//var_dump($new_img);exit();
imagecopyresampled($new_img,$inter_img,0,0,0,0,$new_width,$new_height,$inter_w,$inter_h);
switch($type) {
case IMAGETYPE_JPEG :
imagejpeg($new_img, $dst_file,100); // 存儲圖像
break;
case IMAGETYPE_PNG :
imagepng($new_img,$dst_file,100);
break;
case IMAGETYPE_GIF :
imagegif($new_img,$dst_file,100);
break;
default:
break;
}
} // end if 1
// 2 目標圖像 的一個邊大于原圖,一個邊小于原圖 ,先放大平普?qǐng)D像,然后裁剪
// =if( ($ratio_w < 1 && $ratio_h > 1) || ($ratio_w >1 && $ratio_h <1) )
else{
$ratio=$ratio_h>$ratio_w? $ratio_h : $ratio_w; //取比例大的那個值
// 定義一個中間的大圖像,該圖像的高或?qū)捄湍繕?biāo)圖像相等,然后對原圖放大
$inter_w=(int)($w * $ratio);
$inter_h=(int) ($h * $ratio);
$inter_img=imagecreatetruecolor($inter_w , $inter_h);
//將原圖縮放比例后裁剪
imagecopyresampled($inter_img,$src_img,0,0,0,0,$inter_w,$inter_h,$w,$h);
// 定義一個新的圖像
$new_img=imagecreatetruecolor($new_width,$new_height);
imagecopy($new_img, $inter_img, 0,0,0,0,$new_width,$new_height);
switch($type) {
case IMAGETYPE_JPEG :
imagejpeg($new_img, $dst_file,100); // 存儲圖像
break;
case IMAGETYPE_PNG :
imagepng($new_img,$dst_file,100);
break;
case IMAGETYPE_GIF :
imagegif($new_img,$dst_file,100);
break;
default:
break;
}
}// if3
}// end function
my_image_resize('test.gif','11111.gif','100px','100px');
?>
需求如上,源碼如下:
復制代碼 代碼如下:
<?
*exif_imagetype -- 判斷一個圖像的類型
*說明:函數功能是把一個圖像裁剪為任意大小的圖像,圖像不變形
* 參數說明:輸入 需要處理圖片的 文件名,生成新圖片的保存文件名,生成新圖片的寬,生成新圖片的高
*/
// 獲得任意大小圖像,不足地方拉伸,不產生變形,不留下空白
function my_image_resize($src_file, $dst_file , $new_width , $new_height) {
$new_width= intval($new_width);
$new_height=intval($new_width);
if($new_width <1 || $new_height <1) {
echo "params width or height error !";
exit();
}
if(!file_exists($src_file)) {
echo $src_file . " is not exists !";
exit();
}
// 圖像類型
$type=exif_imagetype($src_file);
$support_type=array(IMAGETYPE_JPEG , IMAGETYPE_PNG , IMAGETYPE_GIF);
if(!in_array($type, $support_type,true)) {
echo "this type of image does not support! only support jpg , gif or png";
exit();
}
//Load image
switch($type) {
case IMAGETYPE_JPEG :
$src_img=imagecreatefromjpeg($src_file);
break;
case IMAGETYPE_PNG :
$src_img=imagecreatefrompng($src_file);
break;
case IMAGETYPE_GIF :
$src_img=imagecreatefromgif($src_file);
break;
default:
echo "Load image error!";
exit();
}
$w=imagesx($src_img);
$h=imagesy($src_img);
$ratio_w=1.0 * $new_width / $w;
$ratio_h=1.0 * $new_height / $h;
$ratio=1.0;
// 生成的圖像的高寬比原來的都小,或都大 ,原則是 取大比例放大,取大比例縮小(縮小的比例就比較小了)
if( ($ratio_w < 1 && $ratio_h < 1) || ($ratio_w > 1 && $ratio_h > 1)) {
if($ratio_w < $ratio_h) {
$ratio = $ratio_h ; // 情況一,寬度的比例比高度方向的小,按照高度的比例標準來裁剪或放大
}else {
$ratio = $ratio_w ;
}
// 定義一個中間的臨時圖像,該圖像的寬高比 正好滿足目標要求
$inter_w=(int)($new_width / $ratio);
$inter_h=(int) ($new_height / $ratio);
$inter_img=imagecreatetruecolor($inter_w , $inter_h);
//var_dump($inter_img);
imagecopy($inter_img, $src_img, 0,0,0,0,$inter_w,$inter_h);
// 生成一個以最大邊長度為大小的是目標圖像$ratio比例的臨時圖像
// 定義一個新的圖像
$new_img=imagecreatetruecolor($new_width,$new_height);
//var_dump($new_img);exit();
imagecopyresampled($new_img,$inter_img,0,0,0,0,$new_width,$new_height,$inter_w,$inter_h);
switch($type) {
case IMAGETYPE_JPEG :
imagejpeg($new_img, $dst_file,100); // 存儲圖像
break;
case IMAGETYPE_PNG :
imagepng($new_img,$dst_file,100);
break;
case IMAGETYPE_GIF :
imagegif($new_img,$dst_file,100);
break;
default:
break;
}
} // end if 1
// 2 目標圖像 的一個邊大于原圖,一個邊小于原圖 ,先放大平普?qǐng)D像,然后裁剪
// =if( ($ratio_w < 1 && $ratio_h > 1) || ($ratio_w >1 && $ratio_h <1) )
else{
$ratio=$ratio_h>$ratio_w? $ratio_h : $ratio_w; //取比例大的那個值
// 定義一個中間的大圖像,該圖像的高或?qū)捄湍繕?biāo)圖像相等,然后對原圖放大
$inter_w=(int)($w * $ratio);
$inter_h=(int) ($h * $ratio);
$inter_img=imagecreatetruecolor($inter_w , $inter_h);
//將原圖縮放比例后裁剪
imagecopyresampled($inter_img,$src_img,0,0,0,0,$inter_w,$inter_h,$w,$h);
// 定義一個新的圖像
$new_img=imagecreatetruecolor($new_width,$new_height);
imagecopy($new_img, $inter_img, 0,0,0,0,$new_width,$new_height);
switch($type) {
case IMAGETYPE_JPEG :
imagejpeg($new_img, $dst_file,100); // 存儲圖像
break;
case IMAGETYPE_PNG :
imagepng($new_img,$dst_file,100);
break;
case IMAGETYPE_GIF :
imagegif($new_img,$dst_file,100);
break;
default:
break;
}
}// if3
}// end function
my_image_resize('test.gif','11111.gif','100px','100px');
?>
您可能感興趣的文章:
- 使用PHP生成二維碼的兩種方法(帶logo圖像)
- php圖像處理函數大全(推薦收藏)
- PHP輸出圖像imagegif、imagejpeg與imagepng函數用法分析
- PHP圖像處理之imagecreate、imagedestroy函數介紹
- PHP實現提取一個圖像文件并在瀏覽器上顯示的代碼
- 基于OpenCV的PHP圖像人臉識別技術
- PHP圖像識別技術原理與實現
- PHP中繪制圖像的一些函數總結
- PHP GD庫生成圖像的幾個函數總結
- 解析php常用image圖像函數集
- PHP基于GD庫的圖像處理方法小結
- php實現的證件照換底色功能示例【人像摳圖/換背景圖】
相關文章
laravel實現上傳圖片的兩種方式小結
今天小編就為大家分享一篇laravel實現上傳圖片的兩種方式小結,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2019-10-10WordPress主題中添加文章列表頁頁碼導航的PHP代碼實例
這篇文章主要介紹了WordPress主題中添加文章列表頁碼導航的PHP代碼實例,這也是制作各種WordPress主題必備的基礎功能,需要的朋友可以參考下2015-12-12Laravel Eloquent ORM 實現查詢表中指定的字段
今天小編就為大家分享一篇Laravel Eloquent ORM 實現查詢表中指定的字段,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2019-10-10Redis在Laravel項目中的應用實例詳解
這篇文章主要給大家介紹了關于Redis在Laravel項目中應用的相關資料,文中通過示例代碼介紹的非常詳細,對大家學習或者使用laravel具有一定的參考學習價值,需要的朋友們下面跟著小編來一起學習學習吧。2017-08-08PHP反射使用實例和PHP反射API的中文說明
這篇文章主要介紹了PHP反射使用實例和PHP反射API的中文說明,重點在對PHP的反射API中每個方法都做了中文說明,需要的朋友可以參考下2014-07-07微信支付開發發貨通知實例
本篇文章主要介紹微信支付中發貨通知功能的實現,并且提供實例代碼做參考,希望能幫到開發微信支付的小伙伴2016-07-07php is_writable判斷文件是否可寫實例代碼
這篇文章主要介紹了php is_writable判斷文件是否可寫實例代碼的相關資料,需要的朋友可以參考下2016-10-10