MHA實現mysql主從數據庫手動切換的方法

更新時間：2014年10月16日 15:43:28 投稿：shichen2014

這篇文章主要介紹了MHA實現mysql主從數據庫手動切換的方法,詳細的講述了主從數據庫切換的步驟與方法,非常實用,需要的朋友可以參考下

本文實例講述了MHA實現mysql主從數據庫手動切換的方法，分享給大家供大家參考。具體方法如下：

一、準備工作

1、分別在Master和Slave執行如下,方便mha檢查復制:

grant all privileges on *.* to 'root'@'10.1.1.231' identified by 'rootpass';

grant all privileges on *.* to 'root'@'10.1.1.234' identified by 'rootpass';

grant replication slave on *.* to 'jpsync'@'10.1.1.231' identified by 'jppasswd';

grant replication slave on *.* to 'jpsync'@'10.1.1.234' identified by 'jppasswd';

flush privileges;

2、將master設置為只讀

復制代碼代碼如下:

mysql> set global read_only=1;

Query OK, 0 rows affected (0.00 sec)

mysql> show variables like 'read_only';

+---------------+-------+

| Variable_name | Value |

+---------------+-------+

| read_only     | ON    |

+---------------+-------+

1 row in set (0.00 sec)

交互模式:

復制代碼代碼如下:

#masterha_master_switch --master_state=alive --conf=/etc/masterha/app1.cnf    --new_master_host=10.1.1.231  --new_master_port=63306

或非交互模式:

復制代碼代碼如下:

#masterha_master_switch --master_state=alive --conf=/etc/masterha/app1.cnf    --new_master_host=10.1.1.231  --new_master_port=63306 —interactive=0

二、切換完以后，如何讓10.1.1.231為主，10.1.1.234為從，操作步驟:

1、主上執行:

復制代碼代碼如下:

mysql> show master status;

+-------------------------+----------+--------------+--------------------------------------+-------------------+

| File                    | Position | Binlog_Do_DB | Binlog_Ignore_DB                     | Executed_Gtid_Set |

+-------------------------+----------+--------------+--------------------------------------+-------------------+

| mysql-master-bin.000013 |      120 | denovo_ng    | mysql,denovo,test,information_schema |                   |

+-------------------------+----------+--------------+--------------------------------------+-------------------+

1 row in set (0.00 sec)

2、在10.1.1.234上執行如下sql命令；

復制代碼代碼如下:

change master to master_host='10.1.1.231',master_port=63306,master_user='jpsync',

master_password='jppasswd', master_log_file='mysql-master-bin.000013',master_log_pos=120;

mysql> show slave status＼G;

*************************** 1. row ***************************

               Slave_IO_State: Waiting for master to send event

                  Master_Host: 10.1.1.231

                  Master_User: jpsync

                  Master_Port: 63306

                Connect_Retry: 60

              Master_Log_File: mysql-master-bin.000013

          Read_Master_Log_Pos: 120

               Relay_Log_File: compute-0-52-relay-bin.000002

                Relay_Log_Pos: 290

        Relay_Master_Log_File: mysql-master-bin.000013

             Slave_IO_Running: Yes

            Slave_SQL_Running: Yes

3、查看master狀態，并測試

復制代碼代碼如下:

mysql> show slave hosts;

+-----------+------+-------+-----------+--------------------------------------+

| Server_id | Host | Port  | Master_id | Slave_UUID                           |

+-----------+------+-------+-----------+--------------------------------------+

|      1052 |      | 63306 |      1025 | e25a3e4a-39c0-11e4-80cb-00259086c4b6 |

+-----------+------+-------+-----------+--------------------------------------+

1 row in set (0.00 sec)

主庫10.1.1.231上插入記錄

復制代碼代碼如下:

mysql> insert into  test_slave_002 values(555551111,1,55555,99999,44.11,2222,91919);

Query OK, 1 row affected (0.00 sec)

從庫查詢記錄已經存在

復制代碼代碼如下:

mysql> select * from test_slave_002 where id=555551111;

+-----------+-----+-----------+--------------+----------+----------------+--------------+

| id        | tag | ticket_id | candidate_id | duration | source_file_id | source_start |

+-----------+-----+-----------+--------------+----------+----------------+--------------+

| 555551111 |   1 |     55555 |        99999 |    44.11 |           2222 |        91919 |

+-----------+-----+-----------+--------------+----------+----------------+--------------+

1 row in set (0.00 sec)

4、更新配置文件:
更新主庫my.cnf配置添加

復制代碼代碼如下:

skip_slave_start

注意:防止重啟數據庫，啟動slave進程，導致數據不一致。
更新從庫my.cnf配置添加，設置slave庫為只讀:

復制代碼代碼如下:

read_only=1

relay_log_purge=0

然后重啟主庫和從庫,觀察庫的信息:
主庫信息:

復制代碼代碼如下:

mysql> show processlist;

+----+--------+------------------+------+-------------+------+-----------------------------------------------------------------------+------------------+

| Id | User   | Host             | db   | Command     | Time | State                                                                 | Info             |

+----+--------+------------------+------+-------------+------+-----------------------------------------------------------------------+------------------+

|  1 | jpsync | 10.1.1.234:49085 | NULL | Binlog Dump |   17 | Master has sent all binlog to slave; waiting for binlog to be updated | NULL             |

|  2 | root   | localhost        | NULL | Query       |    0 | init                                                                  | show processlist |

+----+--------+------------------+------+-------------+------+-----------------------------------------------------------------------+------------------+

2 rows in set (0.00 sec)

mysql> show master status;

+-------------------------+----------+--------------+--------------------------------------+-------------------+

| File                    | Position | Binlog_Do_DB | Binlog_Ignore_DB                     | Executed_Gtid_Set |

+-------------------------+----------+--------------+--------------------------------------+-------------------+

| mysql-master-bin.000014 |      120 | denovo_ng    | mysql,denovo,test,information_schema |                   |

+-------------------------+----------+--------------+--------------------------------------+-------------------+

1 row in set (0.00 sec)

從庫信息:

復制代碼代碼如下:

mysql> show slave status＼G;

*************************** 1. row ***************************

               Slave_IO_State: Waiting for master to send event

                  Master_Host: 10.1.1.231

                  Master_User: jpsync

                  Master_Port: 63306

                Connect_Retry: 60

              Master_Log_File: mysql-master-bin.000014

          Read_Master_Log_Pos: 120

               Relay_Log_File: compute-0-52-relay-bin.000005

                Relay_Log_Pos: 290

        Relay_Master_Log_File: mysql-master-bin.000014

             Slave_IO_Running: Yes

            Slave_SQL_Running: Yes

mysql> show processlist;

+----+-------------+-----------+------+---------+------+-----------------------------------------------------------------------------+------------------+

| Id | User        | Host      | db   | Command | Time | State                                                                       | Info             |

+----+-------------+-----------+------+---------+------+-----------------------------------------------------------------------------+------------------+

|  1 | system user |           | NULL | Connect |   58 | Waiting for master to send event                                            | NULL             |

|  2 | system user |           | NULL | Connect |   58 | Slave has read all relay log; waiting for the slave I/O thread to update it | NULL             |

|  3 | root        | localhost | NULL | Query   |    0 | init                                                                        | show processlist |

+----+-------------+-----------+------+---------+------+-----------------------------------------------------------------------------+------------------+

3 rows in set (0.00 sec)