C++中的string類的用法小結
相信使用過MFC編程的朋友對CString這個類的印象應該非常深刻吧?的確,MFC中的CString類使用起來真的非常的方便好用。但是如果離開了MFC框架,還有沒有這樣使用起來非常方便的類呢?答案是肯定的。也許有人會說,即使不用MFC框架,也可以想辦法使用MFC中的API,具體的操作方法在本文最后給出操作方法。其實,可能很多人很可能會忽略掉標準C++中string類的使用。標準C++中提供的string類得功能也是非常強大的,一般都能滿足我們開發項目時使用?,F(xiàn)將具體用法的一部分羅列如下,只起一個拋磚引玉的作用吧,好了,廢話少說,直接進入正題吧!
要想使用標準C++中string類,必須要包含
#include <string>// 注意是<string>,不是<string.h>,帶.h的是C語言中的頭文件
using std::string;
using std::wstring;
或
using namespace std;
下面你就可以使用string/wstring了,它們兩分別對應著char和wchar_t。
string和wstring的用法是一樣的,以下只用string作介紹:
string類的構造函數:
string(const char *s); //用c字符串s初始化 string(int n,char c);//用n個字符c初始化
此外,string類還支持默認構造函數和復制構造函數,如string s1;string s2="hello";都是正確的寫法。當構造的string太長而無法表達時會拋出length_error異常 ;
string類的字符操作:
const char &operator[](int n)const; const char &at(int n)const; char &operator[](int n); char &at(int n); //operator[]和at()均返回當前字符串中第n個字符的位置,但at函數提供范圍檢查,當越界時會拋出out_of_range異常,下標運算符[]不提供檢查訪問。 const char *data()const;//返回一個非null終止的c字符數組 const char* c_str()const;//返回一個以null終止的c字符串 int copy(char *s, int n, int pos = 0)const;//把當前串中以pos開始的n個字符拷貝到以s為起始位置的字符數組中,返回實際拷貝的數目
string的特性描述:
int capacity()const; //返回當前容量(即string中不必增加內存即可存放的元素個數) int max_size()const; //返回string對象中可存放的最大字符串的長度 int size()const; //返回當前字符串的大小 int length()const; //返回當前字符串的長度 bool empty()const; //當前字符串是否為空 void resize(int len,char c);//把字符串當前大小置為len,并用字符c填充不足的部分 string類的輸入輸出操作: string類重載運算符operator>>用于輸入,同樣重載運算符operator<<用于輸出操作。 函數getline(istream &in,string &s);用于從輸入流in中讀取字符串到s中,以換行符'\n'分開。
string的賦值:
string &assign(const char *s);//用c類型字符串s賦值
string &assign(const char *s,int n);//用c字符串s開始的n個字符賦值
string &assign(const string &s);//把字符串s賦給當前字符串
string &assign(int n,char c);//用n個字符c賦值給當前字符串
string &assign(const string &s,int start,int n);//把字符串s中從start開始的n個字符賦給當前字符串
string &assign(const_iterator first,const_itertor last);//把first和last迭代器之間的部分賦給字符串
string的連接:
string &append(const char *s); //把c類型字符串s連接到當前字符串結尾
string &append(const char *s,int n);//把c類型字符串s的前n個字符連接到當前字符串結尾
string &append(const string &s); //同operator+=()
string &append(const string &s,int pos,int n);//把字符串s中從pos開始的n個字符連接到當前字符串的結尾
string &append(int n,char c); //在當前字符串結尾添加n個字符c
string &append(const_iterator first,const_iterator last);//把迭代器first和last之間的部分連接到當前字符串的結尾
string的比較:
運算符">","<",">=","<=","!="均被重載用于字符串的比較;
int compare(const string &s) const;//比較當前字符串和s的大小
int compare(int pos, int n,const string &s)const;//比較當前字符串從pos開始的n個字符組成的字符串與s的大小
int compare(int pos, int n,const string &s,int pos2,int n2)const;//比較當前字符串從pos開始的n個字符組成的字符串與s中
//pos2開始的n2個字符組成的字符串的大小
int compare(const char *s) const;
int compare(int pos, int n,const char *s) const;
int compare(int pos, int n,const char *s, int pos2) const;
compare函數在>時返回1,<時返回-1,==時返回0
string的子串:
string的交換:
string類的查找函數:
int find(char c, int pos = 0) const;//從pos開始查找字符c在當前字符串的位置 int find(const char *s, int pos = 0) const;//從pos開始查找字符串s在當前串中的位置 int find(const char *s, int pos, int n) const;//從pos開始查找字符串s中前n個字符在當前串中的位置 int find(const string &s, int pos = 0) const;//從pos開始查找字符串s在當前串中的位置 //查找成功時返回所在位置,失敗返回string::npos的值 int rfind(char c, int pos = npos) const;//從pos開始從后向前查找字符c在當前串中的位置 int rfind(const char *s, int pos = npos) const; int rfind(const char *s, int pos, int n = npos) const; int rfind(const string &s,int pos = npos) const; //從pos開始從后向前查找字符串s中前n個字符組成的字符串在當前串中的位置,成功返回所在位置,失敗時返回string::npos的值 int find_first_of(char c, int pos = 0) const;//從pos開始查找字符c第一次出現的位置 int find_first_of(const char *s, int pos = 0) const; int find_first_of(const char *s, int pos, int n) const; int find_first_of(const string &s,int pos = 0) const; //從pos開始查找當前串中第一個在s的前n個字符組成的數組里的字符的位置。查找失敗返回string::npos int find_first_not_of(char c, int pos = 0) const; int find_first_not_of(const char *s, int pos = 0) const; int find_first_not_of(const char *s, int pos,int n) const; int find_first_not_of(const string &s,int pos = 0) const; //從當前串中查找第一個不在串s中的字符出現的位置,失敗返回string::npos int find_last_of(char c, int pos = npos) const; int find_last_of(const char *s, int pos = npos) const; int find_last_of(const char *s, int pos, int n = npos) const; int find_last_of(const string &s,int pos = npos) const; int find_last_not_of(char c, int pos = npos) const; int find_last_not_of(const char *s, int pos = npos) const; int find_last_not_of(const char *s, int pos, int n) const; int find_last_not_of(const string &s,int pos = npos) const; //find_last_of和find_last_not_of與find_first_of和find_first_not_of相似,只不過是從后向前查找
string類的替換函數:
string &replace(int p0, int n0,const char *s);//刪除從p0開始的n0個字符,然后在p0處插入串s string &replace(int p0, int n0,const char *s, int n);//刪除p0開始的n0個字符,然后在p0處插入字符串s的前n個字符 string &replace(int p0, int n0,const string &s);//刪除從p0開始的n0個字符,然后在p0處插入串s string &replace(int p0, int n0,const string &s, int pos, int n);//刪除p0開始的n0個字符,然后在p0處插入串s中從pos開始的n個字符 string &replace(int p0, int n0,int n, char c);//刪除p0開始的n0個字符,然后在p0處插入n個字符c string &replace(iterator first0, iterator last0,const char *s);//把[first0,last0)之間的部分替換為字符串s string &replace(iterator first0, iterator last0,const char *s, int n);//把[first0,last0)之間的部分替換為s的前n個字符 string &replace(iterator first0, iterator last0,const string &s);//把[first0,last0)之間的部分替換為串s string &replace(iterator first0, iterator last0,int n, char c);//把[first0,last0)之間的部分替換為n個字符c string &replace(iterator first0, iterator last0,const_iterator first, const_iterator last);//把[first0,last0)之間的部分替換成[first,last)之間的字符串
string類的插入函數:
string &insert(int p0, const char *s); string &insert(int p0, const char *s, int n); string &insert(int p0,const string &s); string &insert(int p0,const string &s, int pos, int n); //前4個函數在p0位置插入字符串s中pos開始的前n個字符 string &insert(int p0, int n, char c);//此函數在p0處插入n個字符c iterator insert(iterator it, char c);//在it處插入字符c,返回插入后迭代器的位置 void insert(iterator it, const_iterator first, const_iterator last);//在it處插入[first,last)之間的字符 void insert(iterator it, int n, char c);//在it處插入n個字符c
string類的刪除函數
iterator erase(iterator it);//刪除it指向的字符,返回刪除后迭代器的位置
string &erase(int pos = 0, int n = npos);//刪除pos開始的n個字符,返回修改后的字符串
string類的迭代器處理:
string類提供了向前和向后遍歷的迭代器iterator,迭代器提供了訪問各個字符的語法,類似于指針操作,迭代器不檢查范圍。
用string::iterator或string::const_iterator聲明迭代器變量,const_iterator不允許改變迭代的內容。常用迭代器函數有:
const_iterator begin()const;
iterator begin(); //返回string的起始位置
const_iterator end()const;
iterator end(); //返回string的最后一個字符后面的位置
const_iterator rbegin()const;
iterator rbegin(); //返回string的最后一個字符的位置
const_iterator rend()const;
iterator rend(); //返回string第一個字符位置的前面
rbegin和rend用于從后向前的迭代訪問,通過設置迭代器string::reverse_iterator,string::const_reverse_iterator實現
字符串流處理:
通過定義ostringstream和istringstream變量實現,#include <sstream>頭文件中
例如:
string input("hello,this is a test"); istringstream is(input); string s1,s2,s3,s4; is>>s1>>s2>>s3>>s4;//s1="hello,this",s2="is",s3="a",s4="test" ostringstream os; os<<s1<<s2<<s3<<s4; cout<<os.str();
以上就是對C++ string類的一個簡要介紹。用的好的話它所具有的功能不會比MFC中的CString類遜色多少,呵呵,個人意見!
相關文章
JS如何實現頁面截屏功能實例代碼
這篇文章主要給大家介紹了關于JS如何實現頁面截屏功能的相關資料,文中主要利用了html2canvas和canvas繪制兩個方法來實現,需要的朋友可以參考下2021-06-06微信小程序登錄數據解密及狀態維持實例詳解
這篇文章主要介紹了微信小程序登錄數據解密及狀態維持,結合實例形式分析了微信小程序解密敏感信息及獲取session保持登陸狀態的相關操作技巧,需要的朋友可以參考下2019-05-05如何利用JavaScript實現排序算法淺析
排序算法是筆試中經常出現的,提起排序算法就一定要提下算法復雜度和大O表示法,算法復雜度是指算法在編寫成可執行程序后,運行時所需要的資源,資源包括時間資源和內存資源,這篇文章主要給大家介紹了關于如何利用JavaScript實現排序算法的相關資料,需要的朋友可以參考下2021-11-11layui實現三級導航菜單
這篇文章主要為大家詳細介紹了layui實現三級導航菜單,具有一定的參考價值,感興趣的小伙伴們可以參考一下2019-07-07JS?簡單實現拖拽評星的示例代碼
本文主要介紹了JS?簡單實現拖拽評星,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2023-05-05幾種設置表單元素中文本輸入框不可編輯的方法總結
這篇文章主要是對幾種設置表單元素中文本輸入框不可編輯的方法進行了總結介紹,需要的朋友可以過來參考下,希望對大家有所幫助2013-11-11JS代碼隨機生成姓名、手機號、身份證號、銀行卡號
下面小編自己寫的一個js生成器代碼,代碼比較簡單,實用性非常高,感興趣的朋友一起學習吧2016-04-04