iOS開發中ViewController的頁面跳轉和彈出模態
ViewController 頁面跳轉
從一個Controller跳轉到另一個Controller時,一般有以下2種:
1、利用UINavigationController,調用pushViewController,進行跳轉;這種采用壓棧和出棧的方式,進行Controller的管理。調用popViewControllerAnimated方法可以返回。
PickImageViewController *ickImageViewController = [[PickImageViewController alloc] init];
[self.navigationController pushViewController: ickImageViewController animated:true];
[ickImageViewController release];
2、利用UIViewController自身的presentModalViewController,進行跳轉;調用dismissModalViewControllerAnimated方法可以返回。
PickImageViewController *ickImageViewController = [[PickImageViewController alloc] init];
[self presentModalViewController:ickImageViewController animated:YES];
//返回
[self dismissModalViewControllerAnimated:YES];
Present ViewController Modally
一、主要用途
彈出模態ViewController是IOS變成中很有用的一個技術,UIKit提供的一些專門用于模態顯示的ViewController,如UIImagePickerController等。彈出模態ViewController主要使用于一下這幾種情形:
1、收集用戶輸入信息
2、臨時呈現一些內容
3、臨時改變工作模式
4、相應設備方向變化(用于針對不同方向分別是想兩個ViewController的情況)
5、顯示一個新的view層級
這幾種情形都會暫時中斷程序正常的執行流程,主要作用是收集或者顯示一些信息。
二、幾個概念和常用設置
1、presenting view controller Vs presented view controller
當我們在view controller A中模態顯示view controller B的時候,A就充當presenting view controller(彈出VC),而B就是presented view controller(被彈出VC)。官方文檔建議這兩者之間通過delegate實現交互,如果使用過UIImagePickerController從系統相冊選取照片或者拍照,我們可以發現imagePickerController和彈出它的VC之間就是通過UIImagePickerControllerDelegate實現交互的。因此我們在實際應用用,最好也遵守這個原則,在被彈出的VC中定義delegate,然后在彈出VC中實現該代理,這樣就可以比較方便的實現兩者之間的交互。
2、Modal Presentation Styles(彈出風格)
通過設置presenting VC的modalPresentationStyle屬性,我們可以設置彈出View Controller時的風格,有以下四種風格,其定義如下:
typedef enum {
UIModalPresentationFullScreen = 0,
UIModalPresentationPageSheet,
UIModalPresentationFormSheet,
UIModalPresentationCurrentContext,
} UIModalPresentationStyle;
UIModalPresentationFullScreen代表彈出VC時,presented VC充滿全屏,如果彈出VC的wantsFullScreenLayout設置為YES的,則會填充到狀態欄下邊,否則不會填充到狀態欄之下。
UIModalPresentationPageSheet代表彈出是彈出VC時,presented VC的高度和當前屏幕高度相同,寬度和豎屏模式下屏幕寬度相同,剩余未覆蓋區域?qū)儼挡⒆柚褂脩酎c擊,這種彈出模式下,豎屏?xí)r跟UIModalPresentationFullScreen的效果一樣,橫屏?xí)r候兩邊則會留下變暗的區域。
UIModalPresentationFormSheet這種模式下,presented VC的高度和寬度均會小于屏幕尺寸,presented VC居中顯示,四周留下變暗區域。
UIModalPresentationCurrentContext這種模式下,presented VC的彈出方式和presenting VC的父VC的方式相同。
這四種方式在iPad上面統統有效,但在iPhone和iPod touch上面系統始終已UIModalPresentationFullScreen模式顯示presented VC。
3、Modal Transition Style(彈出時的動畫風格)
通過設置設置presented VC的modalTransitionStyle屬性,我們可以設置彈出presented VC時場景切換動畫的風格,其定義如下:
typedef enum {
UIModalTransitionStyleCoverVertical = 0,
UIModalTransitionStyleFlipHorizontal,
UIModalTransitionStyleCrossDissolve,
UIModalTransitionStylePartialCurl,
} UIModalTransitionStyle;
我們可以看到有從底部滑入,水平翻轉進入,交叉溶解以及翻頁這四種風格可選。這四種風格在不受設備的限制,即不管是iPhone還是iPad都會根據我們指定的風格顯示轉場效果。
4、Dismiss Modal ViewController(消失彈出的VC)
消失presented VC,我們可以通過調用以下兩個函數中的任何一個來完成
dismissModalViewControllerAnimated: // 將要廢棄,不贊成繼續使用
dismissViewControllerAnimated:completion:
誰來調用這消失presented VC的這個方法:正確的做法是“誰污染誰治理”,即presenting VC調用上面的方法來取消presented VC的顯示。這樣做有一個好處,如果一個VC真不用戶做的不同選擇可能彈出不同的view controller,當不再需要顯示被彈出的view controller的時候,直接調用[self dismissModalViewControllerAnimated]即可使之消失,而不用去關心其具體顯示的哪一類view controller。當然系統在這里做了優化,當我們在presented VC里面調用上面的方法的時候,系統會自動的將這個消息傳遞到相應的presenting VC中,這樣就可以實現不管誰彈出了自己,當不再需要的時候直接將自己消失掉的功能。在應用中具體要采用那種要看具體情況,如果presented VC需要和presenting VC有數據傳遞的話,建議在presenting VC實現的代理函數中dismiss彈出的view controller。
相關文章
iOS UILabel根據內容自動調整高度
這篇文章主要為大家詳細介紹了iOS UILabel根據內容自動調整高度,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-06-06詳解iOS App中UITableView的創建與內容刷新
這篇文章主要介紹了iOS App中UITableView的創建與內容刷新,講解了UITableView一些基本的樣式與cell的設置及刷新,需要的朋友可以參考下2016-04-04iOS App中UIPickerView選擇欄控件的使用實例解析
這篇文章主要介紹了iOS App中的UIPickerView選擇欄控件的使用,文中演示了兩個超詳細的例子,示例代碼為Objective-C,需要的朋友可以參考下2016-04-04