Oracle 8i在P4上的安裝
1、將ORACLE軟件拷貝到硬盤。
2、將 硬盤目錄文件\stage\Components\oracle.swd.jre\1.1.7.30/1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll 的文件改名為
symcjit.old
3.從\install\win32 目錄下運行SETUP.exe 文件進行安裝。
前提是:機器上沒有裝過Oracle產品。如有的話請先卸載,再將注冊表中Oracle項刪除。
方法二、(此方法斑竹成功安裝,但較麻煩,方法的核心是加 -nojit)
.. Copy only the install directory from the CD to the hard disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications (Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard drive (i.e.
e:\temp\install\win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the absolute
locations are specified.
Choose a Custom install and choose not to create a database during the
install. This way, the Database Configuration Assistant will not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and there is no way
to suppress it. You will need to kill the Net8 Configuration Assistant if it
hangs due to the bug. The installation still will have been successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8 Configuration
Assistant" and click "Stop". If that does not work, look for the most recent
JRE process using the Task Manager, and kill it manually. NOTE: the OUI
itself will also have a jre process. Be sure to kill the one with the most
recent date, which should be the jre process being used for Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through the installation
to the "End of Installation" screen, you should modify the configuration tools
to use "-nojit", then call the appropriate tools from the Start Menu.
Once installation is complete, each of the following files in the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit -classpath ....
this is the only thing you need to add --> ^^^^^^
方法三:
升級oracle帶的jre。
<
相關文章
oracle數據匹配merge into的實例詳解
這篇文章主要介紹了oracle數據匹配merge into的實例詳解的相關資料,希望通過本文能幫助到大家,需要的朋友可以參考下2017-10-10Oracle數據庫數據遷移完整解決步驟
我們常常需要對數據進行遷移,遷移到更性能配置更高級的主機OS上、遷移到遠程的機房、遷移到不同的平臺下,這篇文章主要給大家介紹了關于Oracle數據庫數據遷移的相關資料,需要的朋友可以參考下2024-02-02實例講解臨時處理去重 80w 數據時夯死現象
這篇文章主要介紹了臨時處理去重 80w 數據時夯死現象,需要的朋友可以參考下2015-09-09DBA 在Linux下安裝Oracle Database11g數據庫圖文教程
正在學習Oracle DBA的知識,所以安裝oracle 11個的數據庫用以做測試,如Clone, RMAN, Stream等2014-08-08oracle 存儲過程返回 結果集 table形式的案例
這篇文章主要介紹了oracle 存儲過程返回 結果集 table形式的案例,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2021-01-01Oracle針對數據庫某一行進行操作的時候,如何將這一行加行鎖
Oracle針對數據庫某一行進行操作的時候,如何將這一行加行鎖的實現方法2009-02-02