欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

Android線程管理之ActivityThread

 更新時間:2016年01月19日 09:51:06   作者:yh_thu  
線程通信、ActivityThread及Thread類是理解Android線程管理的關鍵。通過本文給大家介紹Android線程管理之ActivityThread 的相關知識,對android線程管理相關知識感興趣的朋友一起學習吧

ActivityThread功能

它管理應用進程的主線程的執行(相當于普通Java程序的main入口函數),并根據AMS的要求(通過IApplicationThread接口,AMS為Client、ActivityThread.ApplicationThread為Server)負責調度和執行activities、broadcasts和其它操作。

在Android系統中,在默認情況下,一個應用程序內的各個組件(如Activity、BroadcastReceiver、Service)都會在同一個進程(Process)里執行,且由此進程的【主線程】負責執行。

在Android系統中,如果有特別指定(通過android:process),也可以讓特定組件在不同的進程中運行。無論組件在哪一個進程中運行,默認情況下,他們都由此進程的【主線程】負責執行。

【主線程】既要處理Activity組件的UI事件,又要處理Service后臺服務工作,通常會忙不過來。為了解決此問題,主線程可以創建多個子線程來處理后臺服務工作,而本身專心處理UI畫面的事件。

【主線程】的主要責任:

• 快速處理UI事件。而且只有它才處理UI事件, 其它線程還不能存取UI畫面上的對象(如TextView等),此時, 主線程就叫做UI線程?;旧希珹ndroid希望UI線程能根據用戶的要求做出快速響應,如果UI線程花太多時間處理后臺的工作,當UI事件發生時,讓用戶等待時間超過5秒而未處理,Android系統就會給用戶顯示ANR提示信息。

只有UI線程才能執行View派生類的onDraw()函數。

• 快速處理Broadcast消息?!局骶€程】除了處理UI事件之外,還要處理Broadcast消息。所以在BroadcastReceiver的onReceive()函數中,不宜占用太長的時間,否則導致【主線程】無法處理其它的Broadcast消息或UI事件。如果占用時間超過10秒, Android系統就會給用戶顯示ANR提示信息。

注意事項:

• 盡量避免讓【主線程】執行耗時的操作,讓它能快速處理UI事件和Broadcast消息。

• BroadcastReceiver的子類都是無狀態的,即每次啟動時,才會創建其對象,然后調用它的onReceive()函數,當執行完onReceive()函數時,就立即刪除此對象。由于每次調用其函數時,會重新創建一個新的對象,所以對象里的屬性值,是無法讓各函數所共享。

一:線程通信、ActivityThread及Thread類是理解Android線程管理的關鍵。

線程,作為CPU調度資源的基本單位,在Android等針對嵌入式設備的操作系統中,有著非常重要和基礎的作用。本小節主要從以下三個方面進行分析:

1.《Android線程管理——線程通信》
2.《Android線程管理——ActivityThread》
3.《Android線程管理——Thread類的內部原理、休眠及喚醒》

--------------------------------------------------------------------------------

二、ActivityThread的主要工作及實現機制

ActivityThread是Android應用的主線程(UI線程),說起ActivityThread,不得不提到Activity的創建、啟動過程以及ActivityManagerService,但本文將僅從線程管理的角度來分析ActivityThread。ActivityManagerService、ActivityStack、ApplicationThread等會在后續文章中詳細分析,敬請期待喔~~不過為了說清楚ActivityThread的由來,還是需要簡單介紹下。

以下引用自羅升陽大師的博客:《Android應用程序的Activity啟動過程簡要介紹和學習計劃》

Step 1. 無論是通過Launcher來啟動Activity,還是通過Activity內部調用startActivity接口來啟動新的Activity,都通過Binder進程間通信進入到ActivityManagerService進程中,并且調用ActivityManagerService.startActivity接口;

Step 2. ActivityManagerService調用ActivityStack.startActivityMayWait來做準備要啟動的Activity的相關信息;

Step 3. ActivityStack通知ApplicationThread要進行Activity啟動調度了,這里的ApplicationThread代表的是調用ActivityManagerService.startActivity接口的進程,對于通過點擊應用程序圖標的情景來說,這個進程就是Launcher了,而對于通過在Activity內部調用startActivity的情景來說,這個進程就是這個Activity所在的進程了;

Step 4. ApplicationThread不執行真正的啟動操作,它通過調用ActivityManagerService.activityPaused接口進入到ActivityManagerService進程中,看看是否需要創建新的進程來啟動Activity;

Step 5. 對于通過點擊應用程序圖標來啟動Activity的情景來說,ActivityManagerService在這一步中,會調用startProcessLocked來創建一個新的進程,而對于通過在Activity內部調用startActivity來啟動新的Activity來說,這一步是不需要執行的,因為新的Activity就在原來的Activity所在的進程中進行啟動;

Step 6. ActivityManagerServic調用ApplicationThread.scheduleLaunchActivity接口,通知相應的進程執行啟動Activity的操作;

Step 7. ApplicationThread把這個啟動Activity的操作轉發給ActivityThread,ActivityThread通過ClassLoader導入相應的Activity類,然后把它啟動起來。

大師的這段描述把ActivityManagerService、ActivityStack、ApplicationThread及ActivityThread的調用關系講的很清楚,本文將從ActivityThread的main()方法開始分析其主要工作及實現機制。

ActivityThread源碼來自:https://github.com/android/platform_frameworks_base/blob/master/core/java/android/app/ActivityThread.java

public static void main(String[] args) {
Trace.traceBegin(Trace.TRACE_TAG_ACTIVITY_MANAGER, "ActivityThreadMain");
SamplingProfilerIntegration.start();
// CloseGuard defaults to true and can be quite spammy. We
// disable it here, but selectively enable it later (via
// StrictMode) on debug builds, but using DropBox, not logs.
CloseGuard.setEnabled(false);
Environment.initForCurrentUser();
// Set the reporter for event logging in libcore
EventLogger.setReporter(new EventLoggingReporter());
AndroidKeyStoreProvider.install();
// Make sure TrustedCertificateStore looks in the right place for CA certificates
final File configDir = Environment.getUserConfigDirectory(UserHandle.myUserId());
TrustedCertificateStore.setDefaultUserDirectory(configDir);
Process.setArgV0("<pre-initialized>");
Looper.prepareMainLooper();
ActivityThread thread = new ActivityThread();
thread.attach(false);
if (sMainThreadHandler == null) {
sMainThreadHandler = thread.getHandler();
}
if (false) {
Looper.myLooper().setMessageLogging(new
LogPrinter(Log.DEBUG, "ActivityThread"));
}
// End of event ActivityThreadMain.
Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
Looper.loop();
throw new RuntimeException("Main thread loop unexpectedly exited");
}

上述代碼中,紅色部分之前的代碼主要用于環境初始化、AndroidKeyStoreProvider安裝等,這里不做重點說明。紅色部分的代碼主要分為兩個功能塊:1)綁定應用進程到ActivityManagerService;2)主線程Handler消息處理。

關于線程通信機制,Handler、MessageQueue、Message及Looper四者的關系請參考上一篇文章《Android線程管理——線程通信》。

2.1 應用進程綁定

main()方法通過thread.attach(false)綁定應用進程。ActivityManagerNative通過getDefault()方法返回ActivityManagerService實例,ActivityManagerService通過attachApplication將ApplicationThread對象綁定到ActivityManagerService,而ApplicationThread作為Binder實現ActivityManagerService對應用進程的通信和控制。

private void attach(boolean system) {
sCurrentActivityThread = this;
mSystemThread = system;
if (!system) {
…… RuntimeInit.setApplicationObject(mAppThread.asBinder());
final IActivityManager mgr = ActivityManagerNative.getDefault();
try {
mgr.attachApplication(mAppThread);
} catch (RemoteException ex) {
// Ignore
}
…… } else {
……
}
}

在ActivityManagerService內部,attachApplication實際是通過調用attachApplicationLocked實現的,這里采用了synchronized關鍵字保證同步。

@Override
public final void attachApplication(IApplicationThread thread) {
synchronized (this) {
int callingPid = Binder.getCallingPid();
final long origId = Binder.clearCallingIdentity();
attachApplicationLocked(thread, callingPid);
Binder.restoreCallingIdentity(origId);
}
}

attachApplicationLocked的實現較為復雜,其主要功能分為兩部分:

thread.bindApplication
mStackSupervisor.attachApplicationLocked(app)

private final boolean attachApplicationLocked(IApplicationThread thread,
int pid) {
// Find the application record that is being attached... either via
// the pid if we are running in multiple processes, or just pull the
// next app record if we are emulating process with anonymous threads.
ProcessRecord app;
if (pid != MY_PID && pid >= 0) {
synchronized (mPidsSelfLocked) {
app = mPidsSelfLocked.get(pid);
}
} else {
app = null;
}
// ……
try {
// ……
thread.bindApplication(processName, appInfo, providers, app.instrumentationClass,
profilerInfo, app.instrumentationArguments, app.instrumentationWatcher,
app.instrumentationUiAutomationConnection, testMode, enableOpenGlTrace,
enableTrackAllocation, isRestrictedBackupMode || !normalMode, app.persistent,
new Configuration(mConfiguration), app.compat,
getCommonServicesLocked(app.isolated),
mCoreSettingsObserver.getCoreSettingsLocked());
updateLruProcessLocked(app, false, null);
app.lastRequestedGc = app.lastLowMemory = SystemClock.uptimeMillis();
} catch (Exception e) {
// todo: Yikes! What should we do? For now we will try to
// start another process, but that could easily get us in
// an infinite loop of restarting processes...
Slog.wtf(TAG, "Exception thrown during bind of " + app, e);
app.resetPackageList(mProcessStats);
app.unlinkDeathRecipient();
startProcessLocked(app, "bind fail", processName);
return false;
}
// See if the top visible activity is waiting to run in this process...
if (normalMode) {
try {
if (mStackSupervisor.attachApplicationLocked(app)) {
didSomething = true;
}
} catch (Exception e) {
Slog.wtf(TAG, "Exception thrown launching activities in " + app, e);
badApp = true;
}
}
// ……
}

thread對象其實是ActivityThread里ApplicationThread對象在ActivityManagerService的代理對象,故此執行thread.bindApplication,最終會調用ApplicationThread的bindApplication方法。該bindApplication方法的實質是通過向ActivityThread的消息隊列發送BIND_APPLICATION消息,消息的處理調用handleBindApplication方法,handleBindApplication方法比較重要的是會調用如下方法:

mInstrumentation.callApplicationOnCreate(app);

callApplicationOnCreate即調用應用程序Application的onCreate()方法,說明Application的onCreate()方法會比所有activity的onCreate()方法先調用。

mStackSupervisor為ActivityManagerService的成員變量,類型為ActivityStackSupervisor。

/** Run all ActivityStacks through this */
ActivityStackSupervisor mStackSupervisor;

從注釋可以看出,mStackSupervisor為Activity堆棧管理輔助類實例。ActivityStackSupervisor的attachApplicationLocked()方法的調用了realStartActivityLocked()方法,在realStartActivityLocked()方法中,會調用scheduleLaunchActivity()方法:

final boolean realStartActivityLocked(ActivityRecord r,
ProcessRecord app, boolean andResume, boolean checkConfig)
throws RemoteException {
//... 
try {
//...
app.thread.scheduleLaunchActivity(new Intent(r.intent), r.appToken,
System.identityHashCode(r), r.info,
new Configuration(mService.mConfiguration),
r.compat, r.icicle, results, newIntents, !andResume,
mService.isNextTransitionForward(), profileFile, profileFd,
profileAutoStop);
//...
} catch (RemoteException e) {
//...
}
//... 
return true;
}

app.thread也是ApplicationThread對象在ActivityManagerService的一個代理對象,最終會調用ApplicationThread的scheduleLaunchActivity方法。

// we use token to identify this activity without having to send the
// activity itself back to the activity manager. (matters more with ipc)
@Override
public final void scheduleLaunchActivity(Intent intent, IBinder token, int ident,
ActivityInfo info, Configuration curConfig, Configuration overrideConfig,
CompatibilityInfo compatInfo, String referrer, IVoiceInteractor voiceInteractor,
int procState, Bundle state, PersistableBundle persistentState,
List<ResultInfo> pendingResults, List<ReferrerIntent> pendingNewIntents,
boolean notResumed, boolean isForward, ProfilerInfo profilerInfo) {
updateProcessState(procState, false);
ActivityClientRecord r = new ActivityClientRecord();
……
sendMessage(H.LAUNCH_ACTIVITY, r);
}

同bindApplication()方法,最終是通過向ActivityThread的消息隊列發送消息,在ActivityThread完成實際的LAUNCH_ACTIVITY的操作。

public void handleMessage(Message msg) {
if (DEBUG_MESSAGES) Slog.v(TAG, ">>> handling: " + codeToString(msg.what));
switch (msg.what) {
case LAUNCH_ACTIVITY: {
Trace.traceBegin(Trace.TRACE_TAG_ACTIVITY_MANAGER, "activityStart");
final ActivityClientRecord r = (ActivityClientRecord) msg.obj;
r.packageInfo = getPackageInfoNoCheck(
r.activityInfo.applicationInfo, r.compatInfo);
handleLaunchActivity(r, null);
Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
} break;
……
}

handleLaunchActivity()用于啟動Activity。具體的啟動流程不在這里詳述了,這里重點說明ApplicationThread及ActivityThread的線程通信機制。

2.2 主線程消息處理

在《Android線程管理——線程通信》中談到了普通線程中Handler、MessageQueue、Message及Looper四者的關系,那么,ActivityThread中的線程通信又有什么不同呢?不同之處主要表現為兩點:1)Looper的初始化方式;2)Handler生成。

首先,ActivityThread通過Looper.prepareMainLooper()初始化Looper,為了直觀比較ActivityThread與普通線程初始化Looper的區別,把兩種初始化方法放在一起:

/** Initialize the current thread as a looper.
* This gives you a chance to create handlers that then reference
* this looper, before actually starting the loop. Be sure to call
* {@link #loop()} after calling this method, and end it by calling
* {@link #quit()}.
*/
public static void prepare() {
prepare(true);
}
private static void prepare(boolean quitAllowed) {
if (sThreadLocal.get() != null) {
throw new RuntimeException("Only one Looper may be created per thread");
}
sThreadLocal.set(new Looper(quitAllowed));
}
/**
* Initialize the current thread as a looper, marking it as an
* application's main looper. The main looper for your application
* is created by the Android environment, so you should never need
* to call this function yourself. See also: {@link #prepare()}
*/
public static void prepareMainLooper() {
prepare(false);
synchronized (Looper.class) {
if (sMainLooper != null) {
throw new IllegalStateException("The main Looper has already been prepared.");
}
sMainLooper = myLooper();
}
}

•普通線程的prepare()方法默認quitAllowed參數為true,表示允許退出,ActivityThread在prepareMainLooper()方法中調用prepare()方法,參數為false,表示主線程不允許退出。
•普通線程只調用prepare()方法,ActivityThread在調用完prepare()方法之后,會通過myLooper()方法將本地線程<ThreadLocal>的Looper對象的引用交給sMainLooper。myLooper()其實就是調用sThreadLocal的get()方法實現的。

/**
* Return the Looper object associated with the current thread. Returns
* null if the calling thread is not associated with a Looper.
*/
public static Looper myLooper() {
return sThreadLocal.get();
}

•之所以要通過sMainLooper指向ActivityThread的Looper對象,就是希望通過getMainLooper()方法將主線程的Looper對象開放給其他線程。

/** Returns the application's main looper, which lives in the main thread of the application.
*/
public static Looper getMainLooper() {
synchronized (Looper.class) {
return sMainLooper;
}
}

其次,ActivityThread與普通線程的Handler生成方式也不一樣。普通線程生成一個與Looper綁定的Handler即可,ActivityThread通過sMainThreadHandler指向getHandler()的返回值,而getHandler()方法返回的其實是一個繼承Handler的H對象。。

private class H extends Handler {
……
}
final H mH = new H();
final Handler getHandler() {
return mH;
}

真正實現消息機制“通”信的其實是Looper的loop()方法,loop()方法的核心實現如下:

/**
* Run the message queue in this thread. Be sure to call
* {@link #quit()} to end the loop.
*/
public static void loop() {
final Looper me = myLooper();
if (me == null) {
throw new RuntimeException("No Looper; Looper.prepare() wasn't called on this thread.");
}
final MessageQueue queue = me.mQueue;
// Make sure the identity of this thread is that of the local process,
// and keep track of what that identity token actually is.
Binder.clearCallingIdentity();
final long ident = Binder.clearCallingIdentity();
for (;;) {
Message msg = queue.next(); // might block
if (msg == null) {
// No message indicates that the message queue is quitting.
return;
}
// This must be in a local variable, in case a UI event sets the logger
Printer logging = me.mLogging;
if (logging != null) {
logging.println(">>>>> Dispatching to " + msg.target + " " +
msg.callback + ": " + msg.what);
}
msg.target.dispatchMessage(msg);
if (logging != null) {
logging.println("<<<<< Finished to " + msg.target + " " + msg.callback);
}
// Make sure that during the course of dispatching the
// identity of the thread wasn't corrupted.
final long newIdent = Binder.clearCallingIdentity();
if (ident != newIdent) {
Log.wtf(TAG, "Thread identity changed from 0x"
+ Long.toHexString(ident) + " to 0x"
+ Long.toHexString(newIdent) + " while dispatching to "
+ msg.target.getClass().getName() + " "
+ msg.callback + " what=" + msg.what);
}
msg.recycle();
}
}

大致流程如下:

•首先通過上述myLooper()方法獲取Looper對象,取出Looper持有的MessageQueue;
•然后從MessageQueue取出Message,如果Message為null,說明線程正在退出;
•Message不為空,則調用Message的target handler對該Message進行分發,具體分發、處理流程可參考《Android線程管理——線程通信》;
•消息處理完畢,調用recycle()方法進行回收。

相關文章

  • Android中顏色選擇器和改變字體顏色的實例教程

    Android中顏色選擇器和改變字體顏色的實例教程

    這篇文章主要介紹了Android中顏色選擇器和改變字體顏色的實例教程,其中改變字體顏色用到了ColorPicker顏色選擇器,需要的朋友可以參考下
    2016-04-04
  • Android架構發展進化詳解

    Android架構發展進化詳解

    Android系統架構從上到下分為五層:應用層、應用框架層、系統運行庫層、硬件抽象層、Linux內核層,Android架構也經歷了多次演進,下面我們來詳細了解一下
    2022-08-08
  • Android自定義指示器時間軸效果實例代碼詳解

    Android自定義指示器時間軸效果實例代碼詳解

    指示器時間軸在外賣、購物類的APP里會經常用到,效果大家都知道的差不多吧,下面小編通過實例代碼給大家分享Android自定義指示器時間軸效果,需要的朋友參考下吧
    2017-12-12
  • Android開發中類加載器DexClassLoader的簡單使用講解

    Android開發中類加載器DexClassLoader的簡單使用講解

    這篇文章主要介紹了Android開發中類加載器DexClassLoader的簡單使用講解,DexClassLoader可以看作是一個特殊的Java中的ClassLoader,需要的朋友可以參考下
    2016-04-04
  • Android studio4.1更新后出現的問題詳解

    Android studio4.1更新后出現的問題詳解

    這篇文章主要介紹了Android studio4.1更新后出現的問題詳解,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2020-10-10
  • Android ViewPager 的使用總結

    Android ViewPager 的使用總結

    這篇文章主要介紹了Android ViewPager 的相關資料,并附實例代碼,,需要的朋友可以參考下
    2016-09-09
  • Android O添加桌面快捷方式的示例

    Android O添加桌面快捷方式的示例

    本篇文章主要介紹了AndroidO添加桌面快捷方式的示例,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2018-01-01
  • Android通過原生APi獲取所在位置的經緯度

    Android通過原生APi獲取所在位置的經緯度

    本篇文章主要介紹了Android通過原生APi獲取所在位置的經緯度,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2017-07-07
  • Android開發之自定義UI組件詳解

    Android開發之自定義UI組件詳解

    這篇文章主要給大家介紹了關于Android開發之自定義UI組件的相關資料,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧
    2021-05-05
  • Activity與Service之間交互并播放歌曲的實現代碼

    Activity與Service之間交互并播放歌曲的實現代碼

    以下是對Activity與Service之間交互并播放歌曲的實現代碼進行了詳細的分析介紹,需要的朋友可以過來參考下
    2013-07-07

最新評論