欧美bbbwbbbw肥妇,免费乱码人妻系列日韩,一级黄片

分享Android 藍牙4.0(ble)開發的解決方案

 更新時間:2016年03月10日 14:39:51   作者:請叫我小東子  
這篇文章主要為大家分享了Android 藍牙4.0(ble)開發的解決方案,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下

最近,隨著智能穿戴式設備、智能醫療以及智能家居的普及,藍牙開發在移動開中顯得非常的重要。由于公司需要,研究了一下,藍牙4.0在Android中的應用。

以下是我的一些總結。

1.先介紹一下關于藍牙4.0中的一些名詞吧:

(1)、GATT(Gneric Attibute  Profile)

通過ble連接,讀寫屬性類小數據Profile通用的規范?,F(xiàn)在所有的ble應用Profile  都是基于GATT

(2)、ATT(Attribute Protocal)

GATT是基于ATT Potocal的ATT針對BLE設備專門做的具體就是傳輸過程中使用盡量少的數據,每個屬性都有個唯一的UUID,屬性chartcteristics and Service的形式傳輸。

(3)、Service是Characteristic的集合。

(4)、Characteristic 特征類型。

比如,有個藍牙ble的血壓計。他可能包括多個Servvice,每個Service有包括多個Characteristic

注意:藍牙ble只能支持Android 4.3以上的系統 SDK>=18

2.以下是開發的步驟:

2.1首先獲取BluetoothManager 

復制代碼 代碼如下:
BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE); 

2.2獲取BluetoothAdapter

復制代碼 代碼如下:
BluetoothAdapter mBluetoothAdapter = bluetoothManager.getAdapter(); 

2.3創建BluetoothAdapter.LeScanCallback

private BluetoothAdapter.LeScanCallback mLeScanCallback = new BluetoothAdapter.LeScanCallback() { 
 
 @Override 
 public void onLeScan(final BluetoothDevice device, int rssi, final byte[] scanRecord) { 
 
  runOnUiThread(new Runnable() { 
  @Override 
  public void run() { 
   try { 
   String struuid = NumberUtils.bytes2HexString(NumberUtils.reverseBytes(scanRecord)).replace("-", "").toLowerCase(); 
   if (device!=null && struuid.contains(DEVICE_UUID_PREFIX.toLowerCase())) { 
    mBluetoothDevices.add(device); 
   } 
   } catch (Exception e) { 
   e.printStackTrace(); 
   } 
  } 
  }); 
 } 
 }; 

2.4.開始搜索設備。

復制代碼 代碼如下:
mBluetoothAdapter.startLeScan(mLeScanCallback); 

2.5.BluetoothDevice  描述了一個藍牙設備 提供了getAddress()設備Mac地址,getName()設備的名稱。
2.6開始連接設備

 /** 
 * Connects to the GATT server hosted on the Bluetooth LE device. 
 * 
 * @param address 
 *  The device address of the destination device. 
 * 
 * @return Return true if the connection is initiated successfully. The 
 *  connection result is reported asynchronously through the 
 *  {@code BluetoothGattCallback#onConnectionStateChange(android.bluetooth.BluetoothGatt, int, int)} 
 *  callback. 
 */ 
 public boolean connect(final String address) { 
 if (mBluetoothAdapter == null || address == null) { 
  Log.w(TAG, "BluetoothAdapter not initialized or unspecified address."); 
  return false; 
 } 
 
 // Previously connected device. Try to reconnect. (先前連接的設備。 嘗試重新連接) 
 if (mBluetoothDeviceAddress != null && address.equals(mBluetoothDeviceAddress) && mBluetoothGatt != null) { 
  Log.d(TAG, "Trying to use an existing mBluetoothGatt for connection."); 
  if (mBluetoothGatt.connect()) { 
  mConnectionState = STATE_CONNECTING; 
  return true; 
  } else { 
  return false; 
  } 
 } 
 
 final BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address); 
 if (device == null) { 
  Log.w(TAG, "Device not found. Unable to connect."); 
  return false; 
 } 
 // We want to directly connect to the device, so we are setting the 
 // autoConnect 
 // parameter to false. 
 mBluetoothGatt = device.connectGatt(this, false, mGattCallback); 
 Log.d(TAG, "Trying to create a new connection."); 
 mBluetoothDeviceAddress = address; 
 mConnectionState = STATE_CONNECTING; 
 return true; 
 } 

2.7連接到設備之后獲取設備的服務(Service)和服務對應的Characteristic。

// Demonstrates how to iterate through the supported GATT 
// Services/Characteristics. 
// In this sample, we populate the data structure that is bound to the 
// ExpandableListView 
// on the UI. 
private void displayGattServices(List<BluetoothGattService> gattServices) { 
 if (gattServices == null) 
 return; 
 String uuid = null; 
 ArrayList<HashMap<String, String>> gattServiceData = new ArrayList<>(); 
 ArrayList<ArrayList<HashMap<String, String>>> gattCharacteristicData = new ArrayList<>(); 
 
 mGattCharacteristics = new ArrayList<>(); 
 
 // Loops through available GATT Services. 
 for (BluetoothGattService gattService : gattServices) { 
 HashMap<String, String> currentServiceData = new HashMap<>(); 
 uuid = gattService.getUuid().toString(); 
 if (uuid.contains("ba11f08c-5f14-0b0d-1080")) {//服務的uuid 
  //System.out.println("this gattService UUID is:" + gattService.getUuid().toString()); 
  currentServiceData.put(LIST_NAME, "Service_OX100"); 
  currentServiceData.put(LIST_UUID, uuid); 
  gattServiceData.add(currentServiceData); 
  ArrayList<HashMap<String, String>> gattCharacteristicGroupData = new ArrayList<>(); 
  List<BluetoothGattCharacteristic> gattCharacteristics = gattService.getCharacteristics(); 
  ArrayList<BluetoothGattCharacteristic> charas = new ArrayList<>(); 
 
  // Loops through available Characteristics. 
  for (BluetoothGattCharacteristic gattCharacteristic : gattCharacteristics) { 
  charas.add(gattCharacteristic); 
  HashMap<String, String> currentCharaData = new HashMap<>(); 
  uuid = gattCharacteristic.getUuid().toString(); 
  if (uuid.toLowerCase().contains("cd01")) { 
   currentCharaData.put(LIST_NAME, "cd01"); 
  } else if (uuid.toLowerCase().contains("cd02")) { 
   currentCharaData.put(LIST_NAME, "cd02"); 
  } else if (uuid.toLowerCase().contains("cd03")) { 
   currentCharaData.put(LIST_NAME, "cd03"); 
  } else if (uuid.toLowerCase().contains("cd04")) { 
   currentCharaData.put(LIST_NAME, "cd04"); 
  } else { 
   currentCharaData.put(LIST_NAME, "write"); 
  } 
 
  currentCharaData.put(LIST_UUID, uuid); 
  gattCharacteristicGroupData.add(currentCharaData); 
  } 
 
  mGattCharacteristics.add(charas); 
 
  gattCharacteristicData.add(gattCharacteristicGroupData); 
 
  mCharacteristicCD01 = gattService.getCharacteristic(UUID.fromString("0000cd01-0000-1000-8000-00805f9b34fb")); 
  mCharacteristicCD02 = gattService.getCharacteristic(UUID.fromString("0000cd02-0000-1000-8000-00805f9b34fb")); 
  mCharacteristicCD03 = gattService.getCharacteristic(UUID.fromString("0000cd03-0000-1000-8000-00805f9b34fb")); 
  mCharacteristicCD04 = gattService.getCharacteristic(UUID.fromString("0000cd04-0000-1000-8000-00805f9b34fb")); 
  mCharacteristicWrite = gattService.getCharacteristic(UUID.fromString("0000cd20-0000-1000-8000-00805f9b34fb")); 
 
  //System.out.println("=======================Set Notification=========================="); 
  // 開始順序監聽,第一個:CD01 
  mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD01, true); 
  mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD02, true); 
  mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD03, true); 
  mBluetoothLeService.setCharacteristicNotification(mCharacteristicCD04, true); 
 } 
 } 
} 

2.8獲取到特征之后,找到服務中可以向下位機寫指令的特征,向該特征寫入指令。

public void wirteCharacteristic(BluetoothGattCharacteristic characteristic) { 
 
 if (mBluetoothAdapter == null || mBluetoothGatt == null) { 
  Log.w(TAG, "BluetoothAdapter not initialized"); 
  return; 
 } 
 
 mBluetoothGatt.writeCharacteristic(characteristic); 
 
 } 

2.9寫入成功之后,開始讀取設備返回來的數據。

private final BluetoothGattCallback mGattCallback = new BluetoothGattCallback() { 
 @Override 
 public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) { 
  String intentAction; 
  //System.out.println("=======status:" + status); 
  if (newState == BluetoothProfile.STATE_CONNECTED) { 
  intentAction = ACTION_GATT_CONNECTED; 
  mConnectionState = STATE_CONNECTED; 
  broadcastUpdate(intentAction); 
  Log.i(TAG, "Connected to GATT server."); 
  // Attempts to discover services after successful connection. 
  Log.i(TAG, "Attempting to start service discovery:" + mBluetoothGatt.discoverServices()); 
 
  } else if (newState == BluetoothProfile.STATE_DISCONNECTED) { 
  intentAction = ACTION_GATT_DISCONNECTED; 
  mConnectionState = STATE_DISCONNECTED; 
  Log.i(TAG, "Disconnected from GATT server."); 
  broadcastUpdate(intentAction); 
  } 
 } 
 
 @Override 
 public void onServicesDiscovered(BluetoothGatt gatt, int status) { 
  if (status == BluetoothGatt.GATT_SUCCESS) { 
  broadcastUpdate(ACTION_GATT_SERVICES_DISCOVERED); 
  } else { 
  Log.w(TAG, "onServicesDiscovered received: " + status); 
  } 
 } 
 //從特征中讀取數據 
 @Override 
 public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { 
  //System.out.println("onCharacteristicRead"); 
  if (status == BluetoothGatt.GATT_SUCCESS) { 
  broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); 
  } 
 } 
 //向特征中寫入數據 
 @Override 
 public void onCharacteristicWrite(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { 
  //System.out.println("--------write success----- status:" + status); 
 } 
 
 /* 
  * when connected successfully will callback this method this method can 
  * dealwith send password or data analyze 
  
  *當連接成功將回調該方法 
  */ 
 @Override 
 public void onCharacteristicChanged(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic) { 
  broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); 
  if (characteristic.getValue() != null) { 
 
  //System.out.println(characteristic.getStringValue(0)); 
  } 
  //System.out.println("--------onCharacteristicChanged-----"); 
 } 
 
 @Override 
 public void onDescriptorWrite(BluetoothGatt gatt, BluetoothGattDescriptor descriptor, int status) { 
 
  //System.out.println("onDescriptorWriteonDescriptorWrite = " + status + ", descriptor =" + descriptor.getUuid().toString()); 
 
  UUID uuid = descriptor.getCharacteristic().getUuid(); 
  if (uuid.equals(UUID.fromString("0000cd01-0000-1000-8000-00805f9b34fb"))) { 
  broadcastUpdate(ACTION_CD01NOTIDIED); 
  } else if (uuid.equals(UUID.fromString("0000cd02-0000-1000-8000-00805f9b34fb"))) { 
  broadcastUpdate(ACTION_CD02NOTIDIED); 
  } else if (uuid.equals(UUID.fromString("0000cd03-0000-1000-8000-00805f9b34fb"))) { 
  broadcastUpdate(ACTION_CD03NOTIDIED); 
  } else if (uuid.equals(UUID.fromString("0000cd04-0000-1000-8000-00805f9b34fb"))) { 
  broadcastUpdate(ACTION_CD04NOTIDIED); 
  } 
 } 
 
 @Override 
 public void onReadRemoteRssi(BluetoothGatt gatt, int rssi, int status) { 
  //System.out.println("rssi = " + rssi); 
 } 
 }; 
 
 ---------------------------------------------- 
 //從特征中讀取數據 
 @Override 
 public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { 
  //System.out.println("onCharacteristicRead"); 
  if (status == BluetoothGatt.GATT_SUCCESS) { 
  broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); 
  } 
 } 

2.10、斷開連接

/** 
 * Disconnects an existing connection or cancel a pending connection. The 
 * disconnection result is reported asynchronously through the 
 * {@code BluetoothGattCallback#onConnectionStateChange(android.bluetooth.BluetoothGatt, int, int)} 
 * callback. 
 */ 
 public void disconnect() { 
 if (mBluetoothAdapter == null || mBluetoothGatt == null) { 
  Log.w(TAG, "BluetoothAdapter not initialized"); 
  return; 
 } 
 mBluetoothGatt.disconnect(); 
 } 

2.11、數據的轉換方法

// byte轉十六進制字符串 
 public static String bytes2HexString(byte[] bytes) { 
 String ret = ""; 
 for (byte aByte : bytes) { 
  String hex = Integer.toHexString(aByte & 0xFF); 
  if (hex.length() == 1) { 
  hex = '0' + hex; 
  } 
  ret += hex.toUpperCase(Locale.CHINA); 
 } 
 return ret; 
 } 
/** 
 * 將16進制的字符串轉換為字節數組 
 * 
 * @param message 
 * @return 字節數組 
 */ 
 public static byte[] getHexBytes(String message) { 
 int len = message.length() / 2; 
 char[] chars = message.toCharArray(); 
 String[] hexStr = new String[len]; 
 byte[] bytes = new byte[len]; 
 for (int i = 0, j = 0; j < len; i += 2, j++) { 
  hexStr[j] = "" + chars[i] + chars[i + 1]; 
  bytes[j] = (byte) Integer.parseInt(hexStr[j], 16); 
 } 
 return bytes; 
 } 

大概整體就是如上的步驟,但是也是要具體根據廠家的協議來實現通信的過程。

就拿一個我們項目中的demo說一下。

一個藍牙ble的血壓計。 上位機---手機  下位機 -- 血壓計

1.血壓計與手機連接藍牙之后。
2.上位機主動向下位機發送一個身份驗證指令,下位機收到指令后開始給上位做應答,
3.應答成功,下位機會將測量的血壓數據傳送到上位機。
4.最后斷開連接。

希望本文對大家學習Android藍牙技術有所幫助。

相關文章

  • 詳解Android代碼混淆實戰

    詳解Android代碼混淆實戰

    這篇文章主要介紹了詳解Android代碼混淆實戰,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧
    2018-08-08
  • Android中關于定時任務實現關閉訂單問題

    Android中關于定時任務實現關閉訂單問題

    在電商、支付等領域,往往會有這樣的場景,用戶下單后放棄支付了,那這筆訂單會在指定的時間段后進行關閉操作,細心的你一定發現了像某寶、某東都有這樣的邏輯,而且時間很準確,誤差在1s內;那他們是怎么實現的呢?今天通過本文學習定時任務實現關閉訂單問題
    2022-05-05
  • Android編程實現向桌面添加快捷方式的方法

    Android編程實現向桌面添加快捷方式的方法

    這篇文章主要介紹了Android編程實現向桌面添加快捷方式的方法,結合實例形式詳細分析了Android添加桌面快捷方式的操作技巧,需要的朋友可以參考下
    2016-11-11
  • Android WebView的使用方法總結

    Android WebView的使用方法總結

    這篇文章主要介紹了 Android WebView的使用方法總結的相關資料,功能有指定網頁打開,跳轉網頁,傳值等,需要的朋友可以參考下
    2017-07-07
  • Android Activity向右滑動返回

    Android Activity向右滑動返回

    這篇文章主要介紹了Android Activity向右滑動返回,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下
    2020-06-06
  • 微信多圖上傳解決android多圖上傳失敗問題

    微信多圖上傳解決android多圖上傳失敗問題

    這篇文章主要介紹了微信多圖上傳解決android多圖上傳失敗問題,需要的朋友可以參考下
    2017-04-04
  • Ubuntu中為Android HAL編寫JNI方法提供JAVA訪問硬件服務接口

    Ubuntu中為Android HAL編寫JNI方法提供JAVA訪問硬件服務接口

    本文主要介紹Ubuntu中為Android硬件抽象層模塊編寫JNI方法提供Java訪問硬件服務接口,這里給大家詳細說明如何編寫 JNI方法訪問硬件接口并附示例代碼,有需要的小伙伴參考下
    2016-08-08
  • Android 性能優化系列之bitmap圖片優化

    Android 性能優化系列之bitmap圖片優化

    在日常開發的APP,大部分時候需要想用戶展示圖片信息,圖片最終對應Android中的Bitmap對象。而對于APP端來說Bitmap又是一個比較麻煩的問題,主要表現在Bitmap是非常占用內存的對象,處理不當將導致APP運行卡頓甚至出現OOM
    2021-11-11
  • Kotlin中標準函數run、with、let、also與apply的使用和區別詳解

    Kotlin中標準函數run、with、let、also與apply的使用和區別詳解

    相比Java, Kotlin提供了不少高級語法特性。對于一個Kotlin的初學者來說經常會寫出一些不夠優雅的代碼,下面這篇文章主要給大家介紹了關于Kotlin中標準函數run、with、let、also與apply的使用和區別的相關資料,需要的朋友可以參考下。
    2018-03-03
  • 擁抱kotlin之如何習慣使用kotlin高階函數

    擁抱kotlin之如何習慣使用kotlin高階函數

    這篇文章主要給大家介紹了關于擁抱kotlin之如何習慣使用kotlin高階函數的相關資料,文中通過示例代碼介紹的非常詳細,對大家學習或者使用kotlin具有一定的參考學習價值,需要的朋友們下面來一起學習學習吧
    2019-12-12

最新評論