CentOS 6.6安裝配置LAMP服務器(Apache+PHP5+MySQL)
準備篇:
CentOS 6.6系統安裝配置圖解教程
http://www.dbjr.com.cn/os/239738.html
1、配置防火墻,開啟80端口、3306端口
vi /etc/sysconfig/iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
:wq! #保存退出
添加好規則后的防火墻配置文件如下圖所示:

/etc/init.d/iptables restart #重啟防火墻使配置生效
2、關閉SELINUX
vi /etc/selinux/config #SELINUX=enforcing #注釋掉 #SELINUXTYPE=targeted #注釋掉 SELINUX=disabled #增加
:wq! #保存退出
SELINUX配置文件如下圖所示:

3、添加第三方yum源
CentOS默認yum源軟件版本太低了,要安裝最新版本的LAMP,這里使用第三方yum源
wget http://www.atomicorp.com/installers/atomic #下載
首先使用默認yum源安裝wget命令
yum install wget
sh ./atomic #安裝


yum clean all #清除當前yum緩存
yum makecache #緩存yum源中的軟件包信息
yum repolist #列出yum源中可用的軟件包
安裝篇:
一、安裝Apache
yum install httpd #根據提示,輸入Y安裝即可成功安裝
/etc/init.d/httpd start #啟動Apache
備注:Apache啟動之后會提示錯誤:
httpd:httpd: Could not reliably determine the server's fully qualif domain name, using ::1 for ServerName
解決辦法:
vi /etc/httpd/conf/httpd.conf #編輯
ServerName www.example.com:80 #去掉前面的注釋
:wq! #保存退出
chkconfig httpd on #設為開機啟動
/etc/init.d/httpd restart #重啟Apache
二、安裝MySQL
1、安裝MySQL
yum install mysql mysql-server #詢問是否要安裝,輸入Y即可自動安裝,直到安裝完成
/etc/init.d/mysqld start #啟動MySQL
chkconfig mysqld on #設為開機啟動
cp /usr/share/mysql/my-medium.cnf /etc/my.cnf #拷貝配置文件(注意:如果/etc目錄下面默認有一個my.cnf,直接覆蓋即可)
2、為root賬戶設置密碼
mysql_secure_installation
回車,根據提示輸入Y
輸入2次密碼,回車
根據提示一路輸入Y
最后出現:Thanks for using MySQL!
MySql密碼設置完成,重新啟動 MySQL:
/etc/init.d/mysqld restart #重啟
/etc/init.d/mysqld stop #停止
/etc/init.d/mysqld start #啟動
三、安裝PHP
1、安裝PHP
yum install php #根據提示輸入Y直到安裝完成
2、安裝PHP組件,使PHP支持MySQL
yum install php-mysql php-gd libjpeg* php-imap php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-mcrypt php-bcmath php-mhash libmcrypt
這里選擇以上安裝包進行安裝
根據提示輸入Y回車
/etc/init.d/mysqld restart #重啟MySql
/etc/init.d/httpd restart #重啟Apche
配置篇
一、Apache配置
vi /etc/httpd/conf/httpd.conf #編輯文件 ServerTokens OS 在44行 修改為:ServerTokens Prod (在出現錯誤頁的時候不顯示服務器操作系統的名稱) ServerSignature On 在536行 修改為:ServerSignature Off (在錯誤頁中不顯示Apache的版本) Options Indexes FollowSymLinks 在331行 修改為:Options Includes ExecCGI FollowSymLinks(允許服務器執行CGI及SSI,禁止列出目錄) #AddHandler cgi-script .cgi 在796行 修改為:AddHandler cgi-script .cgi .pl (允許擴展名為.pl的CGI腳本運行) AllowOverride None 在338行 修改為:AllowOverride All (允許.htaccess) AddDefaultCharset UTF-8 在759行 修改為:AddDefaultCharset GB2312 (添加GB2312為默認編碼) Options Indexes MultiViews FollowSymLinks 在554行 修改為 Options MultiViews FollowSymLinks(不在瀏覽器上顯示樹狀目錄結構) DirectoryIndex index.html index.html.var 在402行 修改為:DirectoryIndex index.html index.htm Default.html Default.htm index.php Default.php index.html.var (設置默認首頁文件,增加index.php) KeepAlive Off 在76行 修改為:KeepAlive On (允許程序性聯機) MaxKeepAliveRequests 100 在83行 修改為:MaxKeepAliveRequests 1000 (增加同時連接數)
:wq! #保存退出
/etc/init.d/httpd restart #重啟
rm -f /etc/httpd/conf.d/welcome.conf /var/www/error/noindex.html #刪除默認測試頁
二、php配置
vi /etc/php.ini #編輯 date.timezone = PRC #在946行 把前面的分號去掉,改為date.timezone = PRC disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen,disk_free_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk_total_space,posix_ctermid,posix_get_last_error,posix_getcwd, posix_getegid,posix_geteuid,posix_getgid, posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp,posix_getpid, posix_getppid,posix_getpwnam,posix_getpwuid, posix_getrlimit, posix_getsid,posix_getuid,posix_isatty, posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid, posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname #在386行 列出PHP可以禁用的函數,如果某些程序需要用到這個函數,可以刪除,取消禁用。 expose_php = Off #在432行 禁止顯示php版本的信息 magic_quotes_gpc = On #在745行 打開magic_quotes_gpc來防止SQL注入 short_open_tag = ON #在229行支持php短標簽 open_basedir = .:/tmp/ #在380行 設置表示允許訪問當前目錄(即PHP腳本文件所在之目錄)和/tmp/目錄,可以防止php木馬跨站,如果改了之后安裝程序有問題(例如:織夢內容管理系統),可以注銷此行,或者直接寫上程序的目錄/data/www.osyunwei.com/:/tmp/
:wq! #保存退出
/etc/init.d/mysqld restart #重啟MySql
/etc/init.d/httpd restart #重啟Apche
測試篇
cd /var/www/html
vi index.php #輸入下面內容
<?php phpinfo(); ?>
:wq! #保存退出
在客戶端瀏覽器輸入服務器IP地址,可以看到如下圖所示相關的配置信息!

注意:apache默認的程序目錄是/var/www/html
權限設置:chown apache.apache -R /var/www/html
至此,CentOS 6.6安裝配置LAMP服務器(Apache+PHP5+MySQL)教程完成!
- 在linux服務器上配置mysql并開放3306端口的操作步驟
- MySQL配置主從服務器(一主多從)
- Ubuntu14.04服務器環境下配置PHP7.0+Apache2+Mysql5.7的方法
- CentOS7服務器中apache、php7以及mysql5.7的安裝配置代碼
- MySQL 4G內存服務器配置優化
- 查看linux服務器上mysql配置文件路徑的方法
- Linux下安裝Python3和django并配置mysql作為django默認服務器方法
- win2008 r2 服務器php+mysql+sqlserver2008運行環境配置(從安裝、優化、安全等)
- MySQL 中的服務器配置和狀態詳解(MySQL Server Configuration and Status)

