Java的封裝類和裝箱拆箱詳解
一、封裝類
1.封裝類概念
Java中存在基礎數據類型,但是在某些情況下,我們要對基礎數據類型進行對象的操作,例如,集合中只能存對象,而不能存在基礎數據類型,于是便出現了封裝類。封裝類就是對基本數據類型進行封裝,并用它生成對象,以便以對象方式操作基本數據類型。每一個基本數據類型都對應一種封裝類。
2. 各個基礎類型對應的封裝類
基礎類型 | 封裝類型 |
---|---|
int | Integer |
byte | Byte |
short | Short |
long | Long |
float | Float |
double | Double |
boolean | Boolean |
char | Character |
二、裝箱與拆箱
1.裝箱與拆箱概念
- 裝箱:將基礎數據類型自動轉化為對應的封裝類
- 拆箱:將封裝類自動轉化為對應的基礎數據類型
2.基礎數據類型封裝
public class Test { public static void main(String[] args) { int num = 1; Object obj = new Num(num);//父類型引用指向子類型對象 System.out.println(obj); } }
public class Num { int num; public Num(int num) { this.num = num; } public String toString() { return "" + num; } } //實現封裝
3.自動裝箱拆箱演示
public class Test { public static void main(String[] args) { int num = 10; Integer num1 = num; // 自動裝箱 int num2 = num1; // 自動拆箱 } }
上面代碼中,首先,num自動裝箱為Integer類對象賦值給num1;然后,num1又自動拆箱為基本數據類型。
4.Integer中valueOf方法和 intValue方法源碼
Integer在裝箱過程中調用了Integer中的valueOf方法,拆箱時調用了Integer中的intValue方法。
valueOf方法:
public static Integer valueOf(int i) { if (i >= IntegerCache.low && i <= IntegerCache.high) return IntegerCache.cache[i + (-IntegerCache.low)]; return new Integer(i); }
intValue方法:
public int intValue() { return value; }
三、自動裝箱和拆箱中的一些問題
1.相同數值比較返回值為false
public class Main { public static void main(String[] args) { Integer num1 = 100; Integer num2 = 100; Integer num3 = 200; Integer num4 = 200; System.out.println(num1 == num2); System.out.println(num3 == num4); } } /* * 運行結果 * true * false */
源碼:
private static class IntegerCache { static final int low = -128; static final int high; static final Integer cache[]; static { // high value may be configured by property int h = 127; String integerCacheHighPropValue = sun.misc.VM.getSavedProperty("java.lang.Integer.IntegerCache.high"); if (integerCacheHighPropValue != null) { try { int i = parseInt(integerCacheHighPropValue); i = Math.max(i, 127); // Maximum array size is Integer.MAX_VALUE h = Math.min(i, Integer.MAX_VALUE - (-low) -1); } catch( NumberFormatException nfe) { // If the property cannot be parsed into an int, ignore it. } } high = h; cache = new Integer[(high - low) + 1]; int j = low; for(int k = 0; k < cache.length; k++) cache[k] = new Integer(j++); // range [-128, 127] must be interned (JLS7 5.1.7) assert IntegerCache.high >= 127; } private IntegerCache() {} }
從源碼中可以看出,在IntegerCache類中初始化了一個Integer數組,它的范圍為-128到127。num1==num2在-128到127之間,因此給num1和num2賦值時,直接返回cache[ ]數組中的對象,屬于同一個對象,返回值為true;而200超過了這個范圍,給num3和num4賦值時,直接返回new Integer(),因此屬于兩個不同的對象,返回值false。
2.浮點型數值比較返回值為false7
public class Main { public static void main(String[] args) { Double num1 = 100.0; Double num2 = 100.0; Double num3 = 200.0; Double num4 = 200.0; System.out.println(num1 == num2); System.out.println(num3 == num4); } } /* * 運行結果 * false * false */
源碼:
public static Double valueOf(double d) { return new Double(d); }
從源碼中可以看出,Double中的valueOf()返回了一個新的封裝類對象,因此都返回false。
以上就是Java的封裝類和裝箱拆箱詳解的詳細內容,更多關于Java封裝類和裝箱拆箱的資料請關注腳本之家其它相關文章!
相關文章
Springboot使用put、delete請求報錯405的處理
這篇文章主要介紹了Springboot使用put、delete請求報錯405的處理方案,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2022-07-07Java語法基礎之選擇結構的if語句、switch語句詳解
這篇文章主要為大詳細介紹了Java語法基礎之選擇結構的if語句、switch語句,感興趣的小伙伴們可以參考一下2016-09-09spring中BeanUtils.copyProperties的使用(深拷貝,淺拷貝)
本文主要介紹了spring中BeanUtils.copyProperties的使用(深拷貝,淺拷貝),文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2023-05-05SpringBoot之bootstrap和application的區別解讀
這篇文章主要介紹了SpringBoot之bootstrap和application的區別及說明,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2023-03-03